KC9001 Flexible fireproof and explosion-proof blanket is suitable for the outer wrapping of the cable straight joint. It adopts multi-layer protective structure to cover the cable straight joint. The outer layer is made of ablation-resistant fireproof cloth with built-in flexible nano thermal insulation sheet and high strength aramid fiber cloth. When the fire broke out, the built-in can flexible nano can get insulation sheet is 3 ~ 4 times of that of the traditional performance, at the same time the highest heat resistance is above 1200 ℃, and it has excellent flame retardant and heat insulation effect, and the built-in high strength aramid fiber cloth can avoid the middle joint breakdown exploded the harm of adjacent cables, avoid the secondary damage caused by the fire. KC9001 light flexible fireproof blanket is easy to install, and it can be easily installed outside the cable intermediate connector after construction by means of pre-installed fire-resistant tie belt and D-type ring clasp without other tools.

• Excellent hygroscopic performance, hygroscopic capacity can reach more than 80% of its own weight, sustainable moisture absorption in high humidity environment.

• Can be used for a long time, the effect of performance does not decay

• With excellent softness, light weight, installation is not limited by the environment, easy to use

• At the same time has the function of moisture absorption, moisture release, maintain stable humidity

• It can also be used normally under zero temperature and does not harden

• Non-toxic environmental protection, can be directly discarded as ordinary garbage

• Non-corrosive, no corrosion when in contact with the equipment in the cabinet

• Reusable

KC1002 is a fireproof, waterproof sealant, specially designed for building and industrial fire sealing, excellent fire performance, has good weather resistance, high and low resistance and bonding

KC3000 Moisture proof sealing material is widely used for moisture proof sealing in distribution control cabinet, RMU, HV/LV switch cabinet, cable branch box, terminal box, pad-mounted transformer, mechanism operation box, assembly control unit, which has low viscosity, good fluidity and easy penetration, resistant to natural freeze-thaw cycle and all kinds harsh environment, while no deformation, no deterioration, no cracking.

With a variety of metal materials, cable sheath material can be closely bonded and not corroded, but also effectively prevent small animals from underground into the cabinet, reduce safety risks; to realize the closed cabinet moisture proof, prevent cable interlayer or channel from moisture, to provide reliable protection for production and operation equipment.

KC5000 foam sealing material is made of A and B material after proper proportion of mixing, chemical reaction and form foaming body. Before it becomes a foaming body, the product is in liquid form and has good fluidity. It can be extremely well applied to fire proof and moisture-proof plugging at the bottom of various electrical and communication panels and cabinets, fire proof and moisture-proof plugging at the opening of complex perforating pipe fittings, etc. The foam sealing material by fire, heat and other high temperature will produce expanded carbon layer, can effectively prevent the spread of fire combustion and heat transfer, so it can provide good protection for non-fire surface, according to GB 23864-2009 standard requirements, with a 1.5h fire aging. In addition, the product in the harsh, dirty environment, still can maintain the normal fire and moisture-proof function.

KC1000 is a solvent-free insulating anticorrosive waterproof coating, bubble is in water for a long time still can maintain the performance, can reduce the corrosion of corrosive environment of electric equipment, can reduce the snakes, rats, birds, small animals such as the cause of disaster risk, also can reduce because of the extreme weather (the typhoon, rain and snow, etc.) caused by accidents, provide long-term stable safe protection for power supply.

◆ Completely meet the requirements of GB 28374-2012;

◆ Environmental protection halogen-free, non-toxic and harmless;

◆ Good flexibility;

◆ Good insulation performance;

◆ Strong adhesion;

◆ Good fire protection effect;

◆ Good anti-corrosion performance.

KC10 Cable trough box is a glass fiber reinforced plastic cable trough box, which is made of high-flame retardant polyester and high-density glass fiber. The product has the characteristics of good insulation, high strength, corrosion resistance, acid and alkali resistance, aging resistance, fire and flame retardant, good environmental adaptability (-50℃-60℃), odorless, and light weight. This product is only 1/4 the weight of the steel cable trough and 1/10 the weight of the cement cable trough. It is easy to install, low cost, long service life, and has the anti-theft function. All technical indicators are in line with the relevant technical requirements of the Monitoring Center of the Ministry of Transport and the Product Quality Supervision and Inspection Center of the Ministry of Railways. They are especially suitable for highways, railways, tunnels, electric power, petroleum, chemical, municipal government and other projects. Ministry and other relevant departments and users unanimously praised.

Cotran cold shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48 class 1, IEEE-404, IEC60502. Our cold shrink terminations offers reliable and consistent performance for longer service life. We have designed our cold shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36kV.

Applications：

Used to provide insulation protection for cable termination and straight joint.

Cotran cold shrink terminations and joints are composed of a series of pre-expanded silicone tubes and necessary accessories. The core is removed after the tube is positioned for installation over an inline connection, or terminal lug, allowing the tube to shrink and provide a excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC, Single-core and multi-core cable rated to 0.6/1kV.