Features
- Simple and fast installation, no tools required.
- Accommodates size ranges from 11.6mm – 84.6mm.
- Seals tight, retains resiliency and pressure even after prolonged years of ageing and exposure.
- Water-resistant.
- No mastic or tape required.
- No torches or heat required.
- Resists acids and alkalis.
- Resists ozone.
- Easily removed.
- No training required for installation
Technical Properties
|
Properties |
Test Method |
Typical Data |
|
Waterproof |
IEC 60529:1989 |
Pass, IPX7 |
|
Shore Hardness |
ASTM D2240-15 |
40~45 |
|
Tensile Strength |
ASTM D412-15a |
≥8.5 MPa |
|
Elongation |
ASTM D412-15a |
≥ 650% |
|
Tear Strength |
ASTM D624-00(2012) |
≥30 kN/m |
|
Dielectric Strength |
ASTM D149-09(2013) |
22.4 kV/mm |
|
Environmental protection |
IEC 62321 |
RoHS |
|
UV resistance |
ASTM D 4388 |
Pass |
|
Ozone resistance |
ASTM D 4388 |
Pass |
Selection table
|
Type |
Color |
Cable Size(mm) |
Package |
|
ECap-1 |
Black |
11.6 – 20.9 |
100 pcs/carton |
|
ECap-2 |
Black |
15.9 – 30.1 |
100 pcs/carton |
|
ECap-3 |
Black |
26.0 – 49.2 |
100 pcs/carton |
|
ECap-4 |
Black |
45.5 – 84.3 |
100 pcs/carton |
Installation
COTRAN ECap cold shrink end caps install quickly and cleanly without flame or grease. Cold shrink end caps are factory expanded on removable inner-supporting plastic cores. Once the end cap is positioned for installation around the end of a cable, the supporting core is unwound and removed. With the core removed, the live-memory action of the specially formulated material shrinks the end cap into position. The constant radial pressure of the Cold Shrink material ensures adorable environmental seal. The cold shrink material resists abrasion, fungus, acids or alkalis, and retains its resiliency for years. Freezing or overheating due to ambient temperatures encountered during shipping or storage does not impair the end caps.
