Dual Layer Structure EPDM Cold Shrink Tube KC96-DUAL

Dual layer structure,design for 1/2'
Installation Easily
Applicable to a variety of jumpers
Waterproofness IPX8

Cotran KC96-Dual is developed based on the standard KC96 EPDM cold shrink tube, It aims to make sealing and weatherproofing more reliable and stable, and to improve the installation efficiency and performance. With the dual layers structure, built-in silicone tube, no need foam tape or other filling materials any more.


Properties Advantage

  • High elastic EPDM and silicone rubber materials.
  • Better weatherproofing performance with double-layer structure
  • Good puncture resistant, abrasion resistance, acid and alkali resistance.
  • 20 years long lifetime during operation.
  • Easy to install, only two steps (Cover, pull).
  • Fast installation, only 15-30 seconds needed to seal one connection.
  • No limitation of spare space, especially design for narrow space.
  • No skill required by engineers, uniform quality after installation, stable and good sealing and 
  • Weatherproofing performance.
  • Much time and labor cost saving.
  • Good operating capability under hash environmental condition, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone.


Applications

◆ Protection and repair for outer sheath of high voltage cable joint;

◆ Fire protection of cables and connectors;

◆For all base materials that need to be insulated against fire;


Installation Instruction

Step 1

 

1. Wrap the foam tape on the 1/2’’ cable to expand the application outline

2. Put jumper cable inside of the tube, before connectjumper to equipment

3. Arrow symbol will be direction of pulling strip, which usually should be downward

Step 2

 

1.Hold the tube, pull strip downward, and rolling, slowly by slowly
2.When pull the white strip till the plastic inner tube is horizontal alignment of the silicone rubber tube, hold cold shrink tube up and attached to bottom of connector on equipment, ensure the tube cover whole metal part of the connector.
3.Hold tube tightly to prevent tube moving, keep pulling strip downward, round and round, till all strip are out.

Step 3

1. Hold the foam tape part tightly, clench several times toaccelerate foam tape attached on cables, help EPDM tube shrinking. 


Property

Item

Parameter and Result

Test Method

Waterproof

Class

Pass, IPX8

IEC 60529:1989+A1:1999+A2:2013;

1 meter depth in water, duration: 4 hours

Physical and mechanical properties

Shore Hardness

A/37/1

ASTM D2240-15

Tensile Strength

11.75 MPa

ASTM D412-15a Method A

Elongation

770%

ASTM D412-15a Method A

Tear Strength

31.71 KN/m

ASTM D624-00(2012)

Electricity

Dielectric Strength

22.4 KV/mm

ASTM D149-09(2013) Method A

Material

Environmental protection

RoHS

IEC 62321


Models

Model

Color

Cable Size(mm)

Package

KC96-Dual

Ф40-140

Black

(color can be customized)

Dual-Layerstructure,design for 1/2” jumper (7/16 DIN) to Equipment

50 pcs/carton

KC96-Dual

Ф28-140

Black

(color can be customized)

Dual-Layerstructure,design for 4.3-10 jumper to Equipment

50 pcs/carton

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
EPDM Cold Shrink Tube
KC96 EPDM Cold Shrink Tube
High elastic EPDM rubber tube structure.
Good puncture resistant, abrasion resistance, acid and alkali resistance.
20 years long lifetime during operation.
Easy to install, only two steps (Cover, pull).
Fast installation, only 15-30 seconds needed to seal one connection.
No limitation of spare space, especially design for narrow space.
Easy to uninstall, only need knife to cut tube open.
No skill required by engineers, uniform quality after installation, stable and good sealing and
Weatherproofing performance.
Much time and labor cost saving.
Good operating capability under hash environmental condition, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone.
EPDM end cap
COTRAN ECap Cold Shrink Rubber EPDM End Cap

CSEC Cold shrink rubber end caps are usually used for environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. Cold shrink EPDM end caps are close-ended, tubular rubber tube that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage, like moisture, contamination and corrosion etc.

underground cable termination
Heat Shrinkable Cable Straight Termination Kit Cable Joint(8.7/15kV-26/35kV)

Straight Through Jointing Kit offered provide for suitable insulating and sealing performance and feature use of heat shrinkable and resin.

Moisture-controlling tablets
Anti-condensation Moisture-controlling Tablets KC4000
  • Excellent hygroscopic performance, hygroscopic capacity can reach more than 80% of its own weight, sustainable moisture absorption in high humidity environment.
  • Can be used for a long time, the effect of performance does not decay
  • With excellent softness, light weight, installation is not limited by the environment, easy to use
  • At the same time has the function of moisture absorption, moisture release, maintain stable humidity
  • It can also be used normally under zero temperature and does not harden
  • Non-toxic environmental protection, can be directly discarded as ordinary garbage
  • Non-corrosive, no corrosion when in contact with the equipment in the cabinet
  • Reusable。
Brazed Liquid Cooling Plate
New Energy Vehicle Brazed Liquid Cooling Plate

◆Good surface flatness

◆Large thermal transfer area
◆Flexible flow channel design
◆Thin thickness to save space
◆Perfect thermal dissipation effect
◆Low leakage risk and high reliability
◆Stable and high production efficiency
◆Good pressure resistance and strength

Sealing Pad
KC80-S Cable Insulation Sealing Protective Pad
KC80-S cable insulation sealing protective pad is a self-adhesive sheet made of EPR rubber and butyl mastic, which has excellent weather resistance, wear resistance, insulation, waterproof and other properties. It is mainly used for the repair of cable outer sheath, the coating of power fittings, insulation protection and other scenarios.
heat shrink terminations
Heat shrink cable accessories 1KV

Cotran heat shrink terminations and joints are composed of a series of pre-expanded adhesive lined heat shrink tubes and necessary accessories. Heat shrink and provide excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC/PILC, S/C, multi-core cable rated to 0.6/1kV.

Aluminum Liquid Cooling Sheet
New Energy Car Battery Pack Aluminum Liquid Cooling Sheet

◆Excellent surface flatness

◆Large thermal transfer area

◆Flexible flow channel design

◆Easy processing and shaping

◆Good thermal dissipation effect

◆Low leak risk and high reliability

◆Good pressure resist and strength

◆High production efficiency and yield

Subscribe
Subscribe to our newsletter and stay up to date with the latest news and deals !

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact