Heat-absorbing and Fireproof Blanket KC9000

KC9000 heat-absorbing and fireproof blanket is a fireproof product that can be directly coated on the external protection of equipment, power cable, cable bridge, etc., which can effectively prevent flame spread and reduce the serious damage caused by high temperature conduction.

Product Instruction

KC9000 heat-absorbing and fireproof blanket is a fireproof product that can be directly coated on the external protection of equipment, power cable, cable bridge, etc., which can effectively prevent flame spread and reduce the serious damage caused by high temperature conduction. In case of fire, the product can resist the high temperature flame above 1000℃, and release chemical crystal water to absorb a lot of heat, effectively reduce the surface temperature of the protected facilities, and provide adequate emergency response time for the protection of the facilities.


Product Features

  • Class A non-combustible material, excellent fire performance
  • Low thermal conductivity, excellent thermal insulation performance
  • Crystal water can be released at high temperature, effectively reducing the space temperature
  • No powder or slag after coating
  • Can be cut arbitrarily, the construction is efficient and convenient
  • Environment-friendly material, non-toxic and harmless


Applications

  • Cable bridge and other steel structure
  • Power wires, cables, intermediate joints, etc.
  • Cable busbar
  • Equipment package


Technical Parameters

 

No.

Test Item

Typical Value

Test standards

1

Tensile Strength,kPa

≥600(Coated metal foil)

GB/T 17911-2018

2

Combustion performance

A

GB 8624-2012

3

Coefficient of thermal conductivity,W/m·k,500℃

0.069

YB/T 4130

4

Bulk density

400、600、800

/

5

Fire performance

2h None of the fuses or circuit breakers are disconnected and none of the bulbs remain on

In accordance with the IEC 60331-1:2018 Integrity tests for cables under flame condition - Part 1: Test method for fire supply and impact of cables with a rated voltage up to 0.6/1kV and an outer diameter exceeding 20mm by flame temperature not less than 830℃


Direction for Use

1. Measure the size according to the on-site installation environment;
2. Cut with electric scissors;
3. Wrap the cut fire blanket on the pipe fittings;
4. Use refractory aluminum foil tape for edge sealing;
5. The stainless steel cable tie is fastened and shaped


Product Specification

型号

Specifications

Package

Width(mm)

Thickness(mm)

Length(m)

Model

610

10

6

1 roll/box

 


Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
Fireproof Tape
High Temperature Resistance Fireproof Tape KC70

◆ Can be used to splice and terminate cable, to avoid fire

◆ Physical and electrical properties are unaffected by the degree of stretch.

◆ Self-fusing tape.

◆ Heat resistance;

◆ Resistance to ozone, UV and xenon exposure;

◆ Operation and installation easily.

Composite Fireproof Board
Metal Composite Fireproof Board KC8000
KC8000 is a metal composite fireproof board with heated expansion property, it is composed of stainless steel plate, fire layer, wire mesh, aluminum foil, totally four layers of structure.
Non-solidified Fireproof Mastic
High Temperature Non-solidified Fireproof Mastic KC7000
  • Thermal expansion,
  • Elastic material, good plasticity, easy to install and operate
  • It can be used for repeated installation
  • Good adhesion to the substrate, outdoor long-term use of no vertical flow
  • Environment-friendly, halogen-free formula
  • Asbestos-free, non-toxic
  • No volatile organic matter
Moisture-controlling tablets
Anti-condensation Moisture-controlling Tablets KC4000
  • Excellent hygroscopic performance, hygroscopic capacity can reach more than 80% of its own weight, sustainable moisture absorption in high humidity environment.
  • Can be used for a long time, the effect of performance does not decay
  • With excellent softness, light weight, installation is not limited by the environment, easy to use
  • At the same time has the function of moisture absorption, moisture release, maintain stable humidity
  • It can also be used normally under zero temperature and does not harden
  • Non-toxic environmental protection, can be directly discarded as ordinary garbage
  • Non-corrosive, no corrosion when in contact with the equipment in the cabinet
  • Reusable。
Fire Retardant Tape
Fire Retardant Tape KC77

KC77 Fire Retardant Tape is a flexible tape with high expansion rate, fire prevention and heat insulation. It is mainly used for fireproof plugging of cracks around single or cluster cables, wind pipe, plastic pipe penetrations and metal penetrations. It has good water resistance, acid and alkali resistance, moisture and heat resistance, and freeze-thaw resistance. It is free of volatile organic matter, asbestos, fiber dust and other harmful substances, safety and environmental protection without pollution. It uses the combination of chemical expansion and physical expansion technology, rapid expansion in case of fire, with the rise of temperature formed with the strength of the carbonization layer tightly filled through the holes of the gap, block the spread of flame and smoke, with more than 3 hours of fire aging. At the same time, the product in the harsh, dirty and other outdoor environment, still can maintain the normal fire function.

Fireproof/Waterproof Sealant KC1002
Fireproof/Waterproof Sealant KC1002

KC1002 is a fireproof, waterproof sealant, specially designed for building and industrial fire sealing, excellent fire performance, has good weather resistance, high and low resistance and bonding

Moisture Proof Sealing Material KC3000
Moisture Proof Sealing Material KC3000

KC3000 Moisture proof sealing material is widely used for moisture proof sealing in distribution control cabinet, RMU, HV/LV switch cabinet, cable branch box, terminal box, pad-mounted transformer, mechanism operation box, assembly control unit, which has low viscosity, good fluidity and easy penetration, resistant to natural freeze-thaw cycle and all kinds harsh environment, while no deformation, no deterioration, no cracking.

With a variety of metal materials, cable sheath material can be closely bonded and not corroded, but also effectively prevent small animals from underground into the cabinet, reduce safety risks; to realize the closed cabinet moisture proof, prevent cable interlayer or channel from moisture, to provide reliable protection for production and operation equipment.

Foam Sealing Material
Foam Sealing Material KC5000

KC5000 foam sealing material is made of A and B material after proper proportion of mixing, chemical reaction and form foaming body. Before it becomes a foaming body, the product is in liquid form and has good fluidity. It can be extremely well applied to fire proof and moisture-proof plugging at the bottom of various electrical and communication panels and cabinets, fire proof and moisture-proof plugging at the opening of complex perforating pipe fittings, etc. The foam sealing material by fire, heat and other high temperature will produce expanded carbon layer, can effectively prevent the spread of fire combustion and heat transfer, so it can provide good protection for non-fire surface, according to GB 23864-2009 standard requirements, with a 1.5h fire aging. In addition, the product in the harsh, dirty environment, still can maintain the normal fire and moisture-proof function.

Subscribe
Subscribe to our newsletter and stay up to date with the latest news and deals !

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact