Fire Retardant Tape KC77

KC77 Fire Retardant Tape is a flexible tape with high expansion rate, fire prevention and heat insulation. It is mainly used for fireproof plugging of cracks around single or cluster cables, wind pipe, plastic pipe penetrations and metal penetrations. It has good water resistance, acid and alkali resistance, moisture and heat resistance, and freeze-thaw resistance. It is free of volatile organic matter, asbestos, fiber dust and other harmful substances, safety and environmental protection without pollution. It uses the combination of chemical expansion and physical expansion technology, rapid expansion in case of fire, with the rise of temperature formed with the strength of the carbonization layer tightly filled through the holes of the gap, block the spread of flame and smoke, with more than 3 hours of fire aging. At the same time, the product in the harsh, dirty and other outdoor environment, still can maintain the normal fire function.

Product Feature

  • High expansion ratio
  • Flexible tape, easy to operate
  • Repeatable install
  • environmental  friendly and halogen-free formula
  • Contains no fiber, non-toxic
  • Contains no volatile organic compound


Application

  • Fireproof sealing of all kinds of cables through cracks (firefighting)
  • Fireproof sealing through the air duct(electricity)
  • Fireproof sealing through plastic pipe (firefighting)
  • Fireproof sealing of metal through-cable tunnel treatment(electricity)


Technical specifications

No.

Performance

Typical Value

Test Standards

1

Appearance  

Soft strip coils  

GB 23864-2009 5.3.2,6.1

2

Apparent density

≤1.6×103 kg/m 3

GB 23864-2009 5.3.2,6.2

3

Water resistance

3d,no swelling, nocracking

GB 23864-2009 5.3.2,6.8

4

Alkali resistance

3d,no swelling, nocracking

GB 23864-2009 5.3.2,6.13

5

Acid resistance

3d,no swelling, nocracking

GB 23864-2009 5.3.2,6.12

6

Humidity resistance

120h,no cracking, nopulverization

GB 23864-2009 5.3.2,6.10

7

Freeze-thaw resistance cycle

15 times,no cracking, no

pulverization

GB 23864-2009 5.3.2,6.11

8

Expansion

character

No flooding (or

cement paste)

≥10ml/g

GB 23864-2009 5.3.2,6.14

After 48 hours of

water immersed

After 48 hours of

cement paste

immersed

9

Flame retardation

V-0  

GB 23864-2009 5.1.4

10

Fire resistance  

Grade A3 or above   

GB 23864-2009 5.2,6.16


Direction for Use

1. Clean the hole, the debris around the perforation, dust, keep the sealing position dry and clean

2. Measure the size of the plugging position, calculate the appropriate length, and cut by hand。

3. The KC77-E fire retardant tape is tightly wound around the through-piece, which can be fixed with straps and pipe clips, and the winding is completed


Dimensions

Width×Thickness×Length:42mm×2.8mm×610mm

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
Fireproof Tape
High Temperature Resistance Fireproof Tape KC70

◆ Can be used to splice and terminate cable, to avoid fire

◆ Physical and electrical properties are unaffected by the degree of stretch.

◆ Self-fusing tape.

◆ Heat resistance;

◆ Resistance to ozone, UV and xenon exposure;

◆ Operation and installation easily.

fire retardant blanket
Heat-absorbing and Fireproof Blanket KC9000
KC9000 heat-absorbing and fireproof blanket is a fireproof product that can be directly coated on the external protection of equipment, power cable, cable bridge, etc., which can effectively prevent flame spread and reduce the serious damage caused by high temperature conduction.
Composite Fireproof Board
Metal Composite Fireproof Board KC8000
KC8000 is a metal composite fireproof board with heated expansion property, it is composed of stainless steel plate, fire layer, wire mesh, aluminum foil, totally four layers of structure.
Non-solidified Fireproof Mastic
High Temperature Non-solidified Fireproof Mastic KC7000
  • Thermal expansion,
  • Elastic material, good plasticity, easy to install and operate
  • It can be used for repeated installation
  • Good adhesion to the substrate, outdoor long-term use of no vertical flow
  • Environment-friendly, halogen-free formula
  • Asbestos-free, non-toxic
  • No volatile organic matter
Moisture-controlling tablets
Anti-condensation Moisture-controlling Tablets KC4000
  • Excellent hygroscopic performance, hygroscopic capacity can reach more than 80% of its own weight, sustainable moisture absorption in high humidity environment.
  • Can be used for a long time, the effect of performance does not decay
  • With excellent softness, light weight, installation is not limited by the environment, easy to use
  • At the same time has the function of moisture absorption, moisture release, maintain stable humidity
  • It can also be used normally under zero temperature and does not harden
  • Non-toxic environmental protection, can be directly discarded as ordinary garbage
  • Non-corrosive, no corrosion when in contact with the equipment in the cabinet
  • Reusable。
Fireproof/Waterproof Sealant KC1002
Fireproof/Waterproof Sealant KC1002

KC1002 is a fireproof, waterproof sealant, specially designed for building and industrial fire sealing, excellent fire performance, has good weather resistance, high and low resistance and bonding

Moisture Proof Sealing Material KC3000
Moisture Proof Sealing Material KC3000

KC3000 Moisture proof sealing material is widely used for moisture proof sealing in distribution control cabinet, RMU, HV/LV switch cabinet, cable branch box, terminal box, pad-mounted transformer, mechanism operation box, assembly control unit, which has low viscosity, good fluidity and easy penetration, resistant to natural freeze-thaw cycle and all kinds harsh environment, while no deformation, no deterioration, no cracking.

With a variety of metal materials, cable sheath material can be closely bonded and not corroded, but also effectively prevent small animals from underground into the cabinet, reduce safety risks; to realize the closed cabinet moisture proof, prevent cable interlayer or channel from moisture, to provide reliable protection for production and operation equipment.

Foam Sealing Material
Foam Sealing Material KC5000

KC5000 foam sealing material is made of A and B material after proper proportion of mixing, chemical reaction and form foaming body. Before it becomes a foaming body, the product is in liquid form and has good fluidity. It can be extremely well applied to fire proof and moisture-proof plugging at the bottom of various electrical and communication panels and cabinets, fire proof and moisture-proof plugging at the opening of complex perforating pipe fittings, etc. The foam sealing material by fire, heat and other high temperature will produce expanded carbon layer, can effectively prevent the spread of fire combustion and heat transfer, so it can provide good protection for non-fire surface, according to GB 23864-2009 standard requirements, with a 1.5h fire aging. In addition, the product in the harsh, dirty environment, still can maintain the normal fire and moisture-proof function.

Subscribe
Subscribe to our newsletter and stay up to date with the latest news and deals !

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact