Cable Tray KC10

KC10 Cable trough box is a glass fiber reinforced plastic cable trough box, which is made of high-flame retardant polyester and high-density glass fiber. The product has the characteristics of good insulation, high strength, corrosion resistance, acid and alkali resistance, aging resistance, fire and flame retardant, good environmental adaptability (-50℃-60℃), odorless, and light weight. This product is only 1/4 the weight of the steel cable trough and 1/10 the weight of the cement cable trough. It is easy to install, low cost, long service life, and has the anti-theft function. All technical indicators are in line with the relevant technical requirements of the Monitoring Center of the Ministry of Transport and the Product Quality Supervision and Inspection Center of the Ministry of Railways. They are especially suitable for highways, railways, tunnels, electric power, petroleum, chemical, municipal government and other projects. Ministry and other relevant departments and users unanimously praised.

Product Features

  • Good insulation and high strength
  • Resistance to corrosion and aging
  • Fire retardant
  • Good environmental adaptability
  • Light weight, easy installation


Installation of power cables for railway, highway, subway, tunnel and municipal construction

Electrical cable laying and fire protection in substation, petroleum, chemical industry, coal mine, large building and other environments

Installation Method

1. Before installation, set up brackets, the spacing should not be greater than 1500mm, generally made of angle steel.

2. Put the slot box on the bracket, and after the position is determined, you can drill through the cable duct box and the support frame with a hand electric drill on the position of the support frame, and then tighten it with bolts. Two holes are drilled on each support frame, the hole diameter is 10mm, Use two sets of M8 bolts.

3. Socket joints and joint cover plates should be used at the slot box joints to connect the two sections of cable slot boxes as a whole.

4. Use glass fiber reinforced plastic cable trough box elbow to connect with trough box at the bend.

5. The box cover and box body are fixed with plastic bolts and stainless steel bolts.

Product Specification

Length × width × height × thickness:  2-4m×300mm×100mm× 3mm,

Other specifications can be customized

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
Fireproof Tape
High Temperature Resistance Fireproof Tape KC70

◆ Can be used to splice and terminate cable, to avoid fire

◆ Physical and electrical properties are unaffected by the degree of stretch.

◆ Self-fusing tape.

◆ Heat resistance;

◆ Resistance to ozone, UV and xenon exposure;

◆ Operation and installation easily.

fire retardant blanket
Heat-absorbing and Fireproof Blanket KC9000
KC9000 heat-absorbing and fireproof blanket is a fireproof product that can be directly coated on the external protection of equipment, power cable, cable bridge, etc., which can effectively prevent flame spread and reduce the serious damage caused by high temperature conduction.
Composite Fireproof Board
Metal Composite Fireproof Board KC8000
KC8000 is a metal composite fireproof board with heated expansion property, it is composed of stainless steel plate, fire layer, wire mesh, aluminum foil, totally four layers of structure.
Non-solidified Fireproof Mastic
High Temperature Non-solidified Fireproof Mastic KC7000
  • Thermal expansion,
  • Elastic material, good plasticity, easy to install and operate
  • It can be used for repeated installation
  • Good adhesion to the substrate, outdoor long-term use of no vertical flow
  • Environment-friendly, halogen-free formula
  • Asbestos-free, non-toxic
  • No volatile organic matter
Moisture-controlling tablets
Anti-condensation Moisture-controlling Tablets KC4000
  • Excellent hygroscopic performance, hygroscopic capacity can reach more than 80% of its own weight, sustainable moisture absorption in high humidity environment.
  • Can be used for a long time, the effect of performance does not decay
  • With excellent softness, light weight, installation is not limited by the environment, easy to use
  • At the same time has the function of moisture absorption, moisture release, maintain stable humidity
  • It can also be used normally under zero temperature and does not harden
  • Non-toxic environmental protection, can be directly discarded as ordinary garbage
  • Non-corrosive, no corrosion when in contact with the equipment in the cabinet
  • Reusable。
Fire Retardant Tape
Fire Retardant Tape KC77

KC77 Fire Retardant Tape is a flexible tape with high expansion rate, fire prevention and heat insulation. It is mainly used for fireproof plugging of cracks around single or cluster cables, wind pipe, plastic pipe penetrations and metal penetrations. It has good water resistance, acid and alkali resistance, moisture and heat resistance, and freeze-thaw resistance. It is free of volatile organic matter, asbestos, fiber dust and other harmful substances, safety and environmental protection without pollution. It uses the combination of chemical expansion and physical expansion technology, rapid expansion in case of fire, with the rise of temperature formed with the strength of the carbonization layer tightly filled through the holes of the gap, block the spread of flame and smoke, with more than 3 hours of fire aging. At the same time, the product in the harsh, dirty and other outdoor environment, still can maintain the normal fire function.

Fireproof/Waterproof Sealant KC1002
Fireproof/Waterproof Sealant KC1002

KC1002 is a fireproof, waterproof sealant, specially designed for building and industrial fire sealing, excellent fire performance, has good weather resistance, high and low resistance and bonding

Moisture Proof Sealing Material KC3000
Moisture Proof Sealing Material KC3000

KC3000 Moisture proof sealing material is widely used for moisture proof sealing in distribution control cabinet, RMU, HV/LV switch cabinet, cable branch box, terminal box, pad-mounted transformer, mechanism operation box, assembly control unit, which has low viscosity, good fluidity and easy penetration, resistant to natural freeze-thaw cycle and all kinds harsh environment, while no deformation, no deterioration, no cracking.

With a variety of metal materials, cable sheath material can be closely bonded and not corroded, but also effectively prevent small animals from underground into the cabinet, reduce safety risks; to realize the closed cabinet moisture proof, prevent cable interlayer or channel from moisture, to provide reliable protection for production and operation equipment.

Subscribe to our newsletter and stay up to date with the latest news and deals !

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.