Anticorrosive Coating for Towers

Anticorrosive coating for towers is a two-component, thick-type, one-side polyurethane acrylic coating with excellent weather resistance and long recoating performance. This product has both anti-corrosion, weather resistance in one, with excellent wear resistance, impact resistance, color retention and aging resistance.

Inquiry now

product introduction

Product Features

The construction is safe and convenient, and the surface treatment requirements are low

Primer painting and finished painting designing into one, cost-effective, save labor and materials

Environmental friendly and pollution-free, in line with the international environmental protection requirements

Applications

Anticorrosion protection of steel tower structure in new construction or maintenance
Anticorrosion protection of other steel structures in various corrosive environment

Technical Parameters

Test Item	Test Standards	Typical Value
Appearance	JG/T 224-2007	Gray
Solid content, (%)	GB1725-79	55
surface dry,（h）	GB/T 1728–1979(1989)	1.5
Entity dry,（h）	GB/T 1728–1979(1989)	5.5
Adhesion (grid method/grade)	GB/T 9286-98	0
Bending resistance (mm)	JG/T 224-2007	2
Impact resistance (mm)	JG/T 224-2007	40
Resistance to water	GB1733-93	168h no abnormalities
Aging test	JG/T 224-2007	no crack, powder ≤ level 1; Discolor≤ level 2
Resistance to salt spray	JG/T 224-2007	750h no flake no red rust
Acid resistance (5%H2SO4)	JG/T 224-2007	500h without exception
Salt resistance water (3%NaCl)	JG/T 224-2007	500h without exception
Workability.	JG/T 224-2007	Brush two lines without obstacles
Environmental performance	RoHS 2.0	Qualified

Direction for Use

1, Surface treatment: Clean up rust, burr, oil, dust, the surface should be flat, dry, no loose floating rust, old coating film, oxide scale, rust removal grade should reach ST2 level and above.

2, A, B components in accordance with the use of the proportion of mixing, stirring uniform can be constructed, according to different construction methods and site environmental conditions in the paint to add the appropriate amount of diluent deployment to the appropriate viscosity, so that the paint can be fully infiltrated but does not produce leakage, hanging, loose, peeling and other defects.

3, The tower site coating construction should be carried out from top to bottom. The coating method can be applied by brushing or spraying.

Product Specification

21kg / set (including component A 17.5kg/barrel, component B 3.5kg/barrel)

3kg / set (including component A 2.5kg/ barrel, component B 0.5kg/barrel)

Certificate

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Anticorrosive Coating for Towers

Tags :

Related products

Visco-Elastic Self-adhesive Corrosion Protection Tape

Viscoelastic Anti-Corrosion Adhesive Tape

The viscoelastic anti-corrosion adhesive tape is an ideal anti-corrosion product. Widely used in corrosion prevention and repair of the anti-corrosion coating of oil and natural gas pipelines, repair of damaged 3PE anti-corrosion coating, and corrosion protection of irregular equipment such as flanges, valves and pumps. It has unique cold flow property and can repair itself during anti-corrosion and repairing process to achieve complete protection. Due to the excellent chemical resistance and no peel-off of the cathodic protection layer, the product can completely eliminate water intrusion and microbial corrosion and thus ensure unique long-term effect.

PE Anti-Corrosion Adhesive Tape

PE anticorrosive adhesive tape is mainly used in oil and gas transmission; Chemical industry, urban construction of water supply and drainage and gas transmission, etc. The outer surface of the buried steel pipeline corrosion. Construction is convenient, no pollution and other characteristics, is outside the pipe anticorrosion priority of anticorrosive system. The performance indicators of the product fully meet the provisions of CNPCstandard SY/T0414-2017 and American Industrial Association standards ANSI/AWWAC209-00 and NACEMR0274-95. The product has reached the level of similar products at home and abroad.

Primer for Anti-Corrosion Tape

The anticorrosive primer and PE anticorrosive tape together constitute the polyethylene cold wound anticorrosive system. Coated on the surface treatment of steel tube, can fill a small bump on the surface of the steel tube, and can increase the adhesive tape with sticky relay between steel tube, at the same time it is also a kind of excellent corrosion inhibitor.

TPO SEALING TAPE

Product Description

TPO sealing tape combines both polypropylene(plastic) and ethylene-propylene (rubber)using state-of-the-art extruding manufacturing technology, which exhibits excellent versatile physical properties of plastic and rubber. Featured with pliable and weldable properties, COTRAN TPO delivers its unique high elasticity under normal condition and its superior plasticity under extreme temperature. Therefore its excellent physical and chemical parameters(high tensile strength and elongation) forges its unbeatable quality.Being commercial roofing system that is reliable, cost effective,environmentally friendly and easy to install, COTRAN TPO is mostly suited for single ply light steel roofs.

COTRAN 932 Wear-Resistant Insulating Repair Tape

COTRAN 932 is made of special chlorosulfonated polyethylene rubber as the base material, supplemented by two tacky mastic layers of flame retardant and waterproof. It can meet the wear-resistant, waterproof and fire-resistant needs of sheath repair for all types of cables. COTRAN 932 is used to repair of mining cables, outer jacket of mining cable splice kits and splicing of mine conduit.

Robotic Coating Tornado X526

COTRAN tornado X526 light insulation material is a self-curing insulating coating material for robot coating. The coating material can be quickly constructed and cured at room temperature. After curing, it has good insulation properties, ultraviolet resistance, strong adhesion, mechanical wear resistance and heat resistance.

The robot coating device is composed of walking module, coating module and wireless control system. It can carry out automatic insulation treatment for 35kV and below overhead bare wires, and can work with live line, automatic up and down line, safe construction, convenient and efficient. After processing, it can effectively prevent insulation hazards such as tree barriers, small animal contact, and external short circuit, and improve the reliability of the power supply of the distribution network.