Industrial Electrical Fiberglass Armor Tape KC88

◆ High tensile strength.

◆ Flame retardant.

◆ High elongation at break.

◆ The back is rubber pressure-sensitive adhesive with good initial viscosity and bonding strength.

◆ Excellent electrical properties.

◆ Withstand high/low temperature.

◆ Operation and installation easily.

KC75 is a self-fusing, conformable, vinyl backing mastic tape. KC75 seals out moisture and protects against corrosion without the need for heating tools or using multiple tapes. KC75 is designed for cable sheath repair, low voltage insulating, conduit repair and protection of CATV components as well as other general taping applications. Application Electrostatic shielding solid dielectric cable connector and terminal Filling all kinds of irregular joint Repair of high-voltage connector conductor shielding layer Other shielding occasions Technical Data Property Typical Value Test Method Adhesion to steel 18.7N/10mm ASTM D 1000 Adhesion to PE 20.2N/10mm ASTM D 1000 Dielectric strength 21KV/mm ASTM D 4325 Volume Resistivity 1.66*10^34 Ω ASTM D 1000 Water Absorption 0.2% ASTM D 4325 Packing Part No. Dimension Color Rolls/Case KC75 38mm*0.635mm*6m Black 40 Note: Other size is available on request.

◆High production efficiency

◆Good heat exchange effect

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Low leak risk and high security

◆Excellent surface flatness

◆Large thermal transfer area

◆Flexible flow channel design

◆Easy processing and shaping

◆Good thermal dissipation effect

◆Low leakage risk and high safety

◆Good pressure resist and strength

◆High production efficiency and yield

Designed for insulation of copper and aluminum busbars- for electrical substations and switchgear cabinets. Can be used for exterior installations

Shrink ratio: 2.5:1

Operating voltage: 35 kV

Material: polyolefin, halogen-free «HF»

Analogs: BPTM (Raychem); BBI (3M)

Resistant to the phenomenon of tracking and UV radiation

High dielectric strength

Color: brick red

The use of tubes ТТШ allows shortening the distance between phase busbars and significantly reducing the dimensions of the device

Protects electrical busbars against chemical corrosion

Protects equipment from short circuits in case of contact of electrical devices with animals and birds

◆ Dual layer structure,design for 1/2'
◆ Installation Easily
◆ Applicable to a variety of jumpers
◆ Waterproofness IPX8

COTRAN tornado X526 light insulation material is a self-curing insulating coating material for robot coating. The coating material can be quickly constructed and cured at room temperature. After curing, it has good insulation properties, ultraviolet resistance, strong adhesion, mechanical wear resistance and heat resistance.

The robot coating device is composed of walking module, coating module and wireless control system. It can carry out automatic insulation treatment for 35kV and below overhead bare wires, and can work with live line, automatic up and down line, safe construction, convenient and efficient. After processing, it can effectively prevent insulation hazards such as tree barriers, small animal contact, and external short circuit, and improve the reliability of the power supply of the distribution network.

Applications：

The electrically semi-conductive property of the breakout provides effective conductive screen and sealing protection to the cable terminations. The breakout can be used to cable terminations up to 36kV.