Cold Shrink Cable Accessories 1KV

Cotran cold shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48 class 1, IEEE-404, IEC60502. Our cold shrink terminations offers reliable and consistent performance for longer service life. We have designed our cold shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36kV.

Applications：

Used to provide insulation protection for cable termination and straight joint.

Applications：

The electrically semi-conductive property of the breakout provides effective conductive screen and sealing protection to the cable terminations. The breakout can be used to cable terminations up to 36kV.

◆ Weather resistance

◆ High flexibility

◆ High elongation at break

Applications：

Cable Connector are applicable to connect the circular wires and cables. GT series of copper connectors are used for copper cable connections, GL series of aluminum connectors are used for aluminum cable connections.

COTRAN Z551 self-fusing silicon rubber tape is composed of self-fusing silicone rubber and easily removed liner. It has excellent resistance to tracking, ozone, UV, corrosion, water and continuous operating temperature of -50℃～180℃. It can be used in dirty areas. Suitable for busbar insulation protection and phase identification, Insulation for terminations and joints of high-voltage power cables up to 35kV, Insulation for submarine cables, submersible motors, large-sized generators, automobiles, aero engines and other electrical equipment.

◆Large thermal dissipation area

◆Battery side thermal dissipation

◆High thermal dissipation efficiency

◆Low leakage risk and high reliability

◆Stable and high production efficiency

◆Reduce the weight of the battery pack

◆Low energy for single cylindrical battery

◆Improve the battery life and performance

Cotran wraparound repair sleeve (CWRS) is designed to repair damaged cable jackets and protect cable or pipes where needs corrosion protection on undamaged ones. CWRS is made from modified cross-linked polyolefin (XLPE) with a hot-melt adhesive. When heating, the sleeve shrinks and the adhesive melts, thereby achieving tightly bonding between the sleeve and the cable. It provides an excellent solution of protection against mechanical stress, harshest environments, moisture and corrosion.

CWRF is a fiber reinforced repair sleeve, which is composed of XLPE and fiber layer. It can provide better mechanical properties. CWRA is a fiber reinforced and aluminum layer reinforced repair sleeve, which is composed of XLPE, fiber layer, and aluminum layer. It can provide more stronger mechanical properties than CWRS and CWRF.