Cold Shrink Cable Accessories 1KV

Cotran cold shrink terminations and joints are composed of a series of pre-expanded silicone tubes and necessary accessories. The core is removed after the tube is positioned for installation over an inline connection, or terminal lug, allowing the tube to shrink and provide a excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC, Single-core and multi-core cable rated to 0.6/1kV.

Inquiry now

product introduction

Cold Shrink Termination

Main Kit Components

Main insulation tube	Breakout	Sealants	PVC coding tape
Spring roll	Braid	Instruction

Selective Chart

Part NO.	Cable cross-section (mm2)	Voltage
CCST-LV-Y/1	16-35	0.6/1kV
CCST-LV-Y/2	35~95	0.6/1kV
CCST-LV-Y/3	95～240	0.6/1kV
CCST-LV-Y/4	300～400	0.6/1kV

Notes: Y indicates numbers of cores.

Cold Shrink Straight Joint

Main Kit Components

Main insulation tube	ERP insulation tape	Sealants	Water-proof rubber tape
Spring roll	Armor tape	Braid	Instruction

Selective Chart

Part NO.	Cable cross-section (mm2)	Voltage
CCSJ--LV-Y/1	16-35	0.6/1kV
CCSJ--LV-Y/2	35~95	0.6/1kV
CCSJ-LV-Y/3	95～240	0.6/1kV
CCSJ-LV-Y/4	300～400	0.6/1kV

Notes: Y indicates numbers of cores.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Cold Shrink Cable Accessories 1KV

Tags :

Related products

Cold Shrink Cable Accessories 10-36KV

Cotran cold shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48 class 1, IEEE-404, IEC60502. Our cold shrink terminations oﬀers reliable and consistent performance for longer service life. We have designed our cold shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36kV.

Cold Shrink 3 cores cable Breakout (1~36kV)

Applications：

Used to provide insulation protection for cable termination and straight joint.

COTRAN ECap Cold Shrink Rubber EPDM End Cap

CSEC Cold shrink rubber end caps are usually used for environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. Cold shrink EPDM end caps are close-ended, tubular rubber tube that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage, like moisture, contamination and corrosion etc.

Electrical Insulation Waterproof Vinyl Mastic Tape KC75

KC75 is a self-fusing, conformable, vinyl backing mastic tape. KC75 seals out moisture and protects against corrosion without the need for heating tools or using multiple tapes. KC75 is designed for cable sheath repair, low voltage insulating, conduit repair and protection of CATV components as well as other general taping applications. Application Electrostatic shielding solid dielectric cable connector and terminal Filling all kinds of irregular joint Repair of high-voltage connector conductor shielding layer Other shielding occasions Technical Data Property Typical Value Test Method Adhesion to steel 18.7N/10mm ASTM D 1000 Adhesion to PE 20.2N/10mm ASTM D 1000 Dielectric strength 21KV/mm ASTM D 4325 Volume Resistivity 1.66*10^34 Ω ASTM D 1000 Water Absorption 0.2% ASTM D 4325 Packing Part No. Dimension Color Rolls/Case KC75 38mm*0.635mm*6m Black 40 Note: Other size is available on request.

Power Battery Pack Aluminum Extrusion Harmonica Tube

◆Excellent surface flatness

◆High processing efficiency

◆Good welding performance

◆Large thermal transfer area

◆High tightness and strength

◆Rapid thermal cooling speed

◆Perfect heat exchange effect

◆Thin thickness to save space

Heat Shrink Stress Control Tube (11~24kV)

Applications：

The specially designed chemical formulation and carefully controlled manufacture technology effectively release the high electrical stress present at insulation screen in termination and joint of power cables from 11kV to 24kV.

Inflatable Duct Sealing System for Power Cable (IDSS)

The inflatable duct sealing system (IDSS) is a wraparound, inflatable mastic-lined bladder used to seal empty or filled cable ducts. When inflated to proper air pressure, the IDSS seals the duct, guaranteeing a reliable water block. The IDSS can be installed in cable ducts in manhole, vaults, buildings, cabinets, or anywhere a reliable duct seal is needed. Application include ducts containing multiple copper, coax, or fiber cable, customer premise cable entrance, and air pipes. IDSS can be installed between -40℃ to 75℃.

Heat Shrink protective Tube (1~36kV)

Applications：

designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.

Categories