Cold Shrink Cable Accessories 1KV

Cotran cold shrink terminations and joints are composed of a series of pre-expanded silicone tubes and necessary accessories. The core is removed after the tube is positioned for installation over an inline connection, or terminal lug, allowing the tube to shrink and provide a excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC, Single-core and multi-core cable rated to 0.6/1kV.

Inquiry now

product introduction

Cold Shrink Termination

Main Kit Components

Main insulation tube	Breakout	Sealants	PVC coding tape
Spring roll	Braid	Instruction

Selective Chart

Part NO.	Cable cross-section (mm2)	Voltage
CCST-LV-Y/1	16-35	0.6/1kV
CCST-LV-Y/2	35~95	0.6/1kV
CCST-LV-Y/3	95～240	0.6/1kV
CCST-LV-Y/4	300～400	0.6/1kV

Notes: Y indicates numbers of cores.

Cold Shrink Straight Joint

Main Kit Components

Main insulation tube	ERP insulation tape	Sealants	Water-proof rubber tape
Spring roll	Armor tape	Braid	Instruction

Selective Chart

Part NO.	Cable cross-section (mm2)	Voltage
CCSJ--LV-Y/1	16-35	0.6/1kV
CCSJ--LV-Y/2	35~95	0.6/1kV
CCSJ-LV-Y/3	95～240	0.6/1kV
CCSJ-LV-Y/4	300～400	0.6/1kV

Notes: Y indicates numbers of cores.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Cold Shrink Cable Accessories 1KV

Tags :

Related products

Cold Shrink Cable Accessories 10-36KV

Cotran cold shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48 class 1, IEEE-404, IEC60502. Our cold shrink terminations oﬀers reliable and consistent performance for longer service life. We have designed our cold shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36kV.

Cold Shrink 3 cores cable Breakout (1~36kV)

Applications：

Used to provide insulation protection for cable termination and straight joint.

Brazing Aluminum Cooling Plate for Electric Vehicle Power Battery

◆High production efficiency

◆Large thermal transfer area

◆Flexible flow channel design

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high reliability

Oil Resistant Filling Mastic

Applications:

To provide oil resistance, void filling and sealing for oil-immersed cable termination and joints for heat shrink technology up to 36kV.

High Frequency Welding Aluminum Liquid Cooled Tube

◆High production efficiency

◆Large thermal contact area

◆Uniform and stable welding

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high security

Customized silicone rubber cold shrink tube enRR-CST

◆IPX8 class, stable and long-life during operation

◆Easy to install, only two steps (Cover, pull)

◆Fast installation, only 15-30 seconds needed to seal one connection

◆No limitation of spare space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,

◆Easy to uninstall, only need knife to cut tube open

◆No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance

◆Much time cost, and labor cost saving

◆Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone

Insulating Busbar Cover Protection up to 11 KV, 24KV, 36KV

Product Introduction

Made from specially formulated radiation cross-linked compounds. It can provide high resistance to tracking and arcing. Used to enhance the insulation properties of busbar in switch and substation to safe protect up to safe protect up to 11 kv, 24kv, 36kv.

Electrical Insulation Waterproof Vinyl Mastic Tape KC75

KC75 is a self-fusing, conformable, vinyl backing mastic tape. KC75 seals out moisture and protects against corrosion without the need for heating tools or using multiple tapes. KC75 is designed for cable sheath repair, low voltage insulating, conduit repair and protection of CATV components as well as other general taping applications. Application Electrostatic shielding solid dielectric cable connector and terminal Filling all kinds of irregular joint Repair of high-voltage connector conductor shielding layer Other shielding occasions Technical Data Property Typical Value Test Method Adhesion to steel 18.7N/10mm ASTM D 1000 Adhesion to PE 20.2N/10mm ASTM D 1000 Dielectric strength 21KV/mm ASTM D 4325 Volume Resistivity 1.66*10^34 Ω ASTM D 1000 Water Absorption 0.2% ASTM D 4325 Packing Part No. Dimension Color Rolls/Case KC75 38mm*0.635mm*6m Black 40 Note: Other size is available on request.

Categories