Cold Shrink 3 cores cable Breakout (1~36kV)

Applications：

Used to provide insulation protection for cable termination and straight joint.

Inquiry now

product introduction

Features：

Quick, easy and safe installation
Immediate reenergizing
High mechanical strength
Waterproof
Accommodates a wide range of cable sizes
Retains its resiliency and pressure

Technical properties

Test Items	Test Method	Test Requirements
Tensile strength	ASTM D 638	7MPa min.
Ultimate elongation	ASTM D 638	600% min.
Tear strength	ASTM D 638	20KN/m min.
Density	ASTM D 792	1.2g/cm3

Selection table:

Size	D(mm)		I(mm)		Recovered wall	Recovered length
Size	D(mm)		I(mm)		(±20%)	(±10%)
(mm)	a* (Min.)	b* (Max.)	a* (Min.)	b* (Max.)	Iw	L	F
HCMB-75/38	75	38	31	14	2.5	170	45
HCMB-92/43	92	43	36	16	2.5	180	45
HCMB-105/53	105	53	41	19	2.5	190	45
HCMB-120/62	120	62	48	23	3.5	201	45
HCMB-160/68	160	68	67	27	3.5	230	60
HCMB-200/85	200	85	80	32	3.5	230	60

a* = Inner diameter as supplied

b* = Inner diameter after fully recovered

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Cold Shrink 3 cores cable Breakout (1~36kV)

Tags :

Related products

Cold Shrink Cable Accessories 1KV

Cotran cold shrink terminations and joints are composed of a series of pre-expanded silicone tubes and necessary accessories. The core is removed after the tube is positioned for installation over an inline connection, or terminal lug, allowing the tube to shrink and provide a excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC, Single-core and multi-core cable rated to 0.6/1kV.

Cold Shrink Cable Accessories 10-36KV

Cotran cold shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48 class 1, IEEE-404, IEC60502. Our cold shrink terminations oﬀers reliable and consistent performance for longer service life. We have designed our cold shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36kV.

Visco-Elastic Self-adhesive Corrosion Protection Tape

Viscoelastic Anti-Corrosion Adhesive Tape

The viscoelastic anti-corrosion adhesive tape is an ideal anti-corrosion product. Widely used in corrosion prevention and repair of the anti-corrosion coating of oil and natural gas pipelines, repair of damaged 3PE anti-corrosion coating, and corrosion protection of irregular equipment such as flanges, valves and pumps. It has unique cold flow property and can repair itself during anti-corrosion and repairing process to achieve complete protection. Due to the excellent chemical resistance and no peel-off of the cathodic protection layer, the product can completely eliminate water intrusion and microbial corrosion and thus ensure unique long-term effect.

Brazing Aluminum Cooling Plate for Electric Vehicle Power Battery

◆High production efficiency

◆Large thermal transfer area

◆Flexible flow channel design

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high reliability

COTRAN ECap Cold Shrink Rubber EPDM End Cap

CSEC Cold shrink rubber end caps are usually used for environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. Cold shrink EPDM end caps are close-ended, tubular rubber tube that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage, like moisture, contamination and corrosion etc.