PIB Self-Fusing Electrical Tape KC74

KC74 self amalgamating tape for insulating and moisture sealing of telecommunication cable connections For insulation and moisture sealing in splices and terminations of solid dielectric power cable up to 10kVFor general-purpose protection and waterproofingFor corrosion protection of metal pipework.

Inquiry now

product introduction

KC74 is a self-fusing, conformable, based on PIB (Polyisobutylene) rubber tape. It is a versatile material for waterproofing, corrosion protection, jointing and repair of cables, used indoors and outdoors through 10kV. Product properties and correct application ensure waterproof connections (for fresh and sea water) in a wide range of temperatures.

Technical Data

Property	Typical Value	Test Method
Tensile strength	1.86MPa	ASTM D 4325
Elongation at break	769%	ASTM D 4325
Dielectric strength	32.9KV/mm	ASTM D 4325
Dielectric constant	2.82	ASTM D 4325
Dissipation factor	0.0015	ASTM D 4325
Heat ageing (130°C 168H)	Pass	ASTM D 4388
Ozone ageing	Pass	ASTM D 4388
UV ageing	Pass	ASTM D 4388
Xenon ageing	Pass	ASTM D 4388
Water absorption	0.06%	ASTM D4325

Packing

Part No.	Dimension	Color	Rolls/Case
KC74	19mmx0.51mmx10m	Black	50

Note: Other size is available on request.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : PIB Self-Fusing Electrical Tape KC74

Tags :

Related products

Busbar Cover

Product Introduction

Made from specially formulated radiation cross-linked compounds. It can provide high resistance to tracking and arcing. Used to enhance the insulation properties of busbar in switch and substation to safe protect up to safe protect up to 11 kv, 24kv, 36kv.

Universal Framework Type Grounding Kits

◆ Can provide several type of cables, such as 1/4”, 1/2”, 7/8”, 5/4”, 13/8”, etc；
◆ Compact structure；
◆ Faster and easy installation；
◆ Contact resistance < 5mΩ；
◆ Weatherproofing IP67；
◆ No extra taping kit needed；
◆ UV and corrosion resistant；

Flexible Fireproof and Explosion-proof Blanket KC9001

KC9001 Flexible fireproof and explosion-proof blanket is suitable for the outer wrapping of the cable straight joint. It adopts multi-layer protective structure to cover the cable straight joint. The outer layer is made of ablation-resistant fireproof cloth with built-in flexible nano thermal insulation sheet and high strength aramid fiber cloth. When the fire broke out, the built-in can flexible nano can get insulation sheet is 3 ~ 4 times of that of the traditional performance, at the same time the highest heat resistance is above 1200 ℃, and it has excellent flame retardant and heat insulation effect, and the built-in high strength aramid fiber cloth can avoid the middle joint breakdown exploded the harm of adjacent cables, avoid the secondary damage caused by the fire. KC9001 light flexible fireproof blanket is easy to install, and it can be easily installed outside the cable intermediate connector after construction by means of pre-installed fire-resistant tie belt and D-type ring clasp without other tools.

New Energy Vehicle Power Battery Snake Tube

◆High material utilization

◆Battery side heat dissipation

◆Large thermal dissipation area

◆High thermal dissipation efficiency

◆Low leakage risk and high reliability

◆Stable and high production efficiency

◆Reduce the weight of the battery pack

◆Improve the battery life and performance

Roll Bonded Water Cold Sheet for Energy Storage Battery

◆High production efficiency

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high reliability

New Energy Automobile Battery Pack Harmonica Tube

◆Uniform and stable welding

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high security

◆Less pollution and environmental

◆Improve the battery performance

7/16 Straight female Connector for 1-5/8 Flexible RF Cable

Material and Plating Inner Conductor Pin Brass / Silver Plating Inner Conductor Socket Tin Bronze / Silver Plating Insulator TPX Body & Outer Conductor Brass / Trimetal Plating Gasket Silicon Rubber Electrical Specifications Characteristics Impedance 50 Ohm Frequency Range DC~2.7GHz Insulation Resistance ≥5000MΩ Dielectric Withstanding Voltage 4000V rms Operating Voltage 2500V rms Center contact resistance ≤0.4 mΩ Outer contact resistance ≤0.2 mΩ Insertion Loss @DC-2.7 GHz ≤0.10dB VSWR @0.8-1.0 GHz ≤1.10 @1.7-2.7 GHz ≤1.13 PIM3(2*43dBm) ≤-155dBc Environmental & Mechanical Specifications Durability (matings) ≥500 cycles Mechanical Shock Test Method MIL-STD-202, Method 213, Test Condition D Vibration Test Method MIL-STD-202, Meth. 204, Cond. A Temperature Range -65°C to +85°C RoHS Compliant Sealing Class IP68 24hr, 1m, 20℃ Regulatory Compliance / Certification ISO 9001:2015 Compliant The facts and figures contained herein are carefully complied to the best of our knowledge, but they are intended for general informational purposes only.

Primer for Anti-Corrosion Tape

The anticorrosive primer and PE anticorrosive tape together constitute the polyethylene cold wound anticorrosive system. Coated on the surface treatment of steel tube, can fill a small bump on the surface of the steel tube, and can increase the adhesive tape with sticky relay between steel tube, at the same time it is also a kind of excellent corrosion inhibitor.

Categories