Robotic Coating Tornado X526

COTRAN tornado X526 light insulation material is a self-curing insulating coating material for robot coating. The coating material can be quickly constructed and cured at room temperature. After curing, it has good insulation properties, ultraviolet resistance, strong adhesion, mechanical wear resistance and heat resistance.

The robot coating device is composed of walking module, coating module and wireless control system. It can carry out automatic insulation treatment for 35kV and below overhead bare wires, and can work with live line, automatic up and down line, safe construction, convenient and efficient. After processing, it can effectively prevent insulation hazards such as tree barriers, small animal contact, and external short circuit, and improve the reliability of the power supply of the distribution network.

Inquiry now

product introduction

Features

For robot and long-term automatic coating
Fast self-curing for 30 minutes
Resistance to UV, weather and corrosion
Light optimized formula, reducing tower load
Excellent waterproof insulation performance

Applications

For robots to insulate bare overhead conductors fast on power distribution network

Technical Properties

Robot device

Property	Requirements
Coating rate	Rate adjustable
Operating voltage	DC24V (Lithium battery)
Coating thickness	The 2.5 mm
Robot remote control distance	300m
Maximum single coating line length	50m

Coating material

Property	Typical value	Test method
Solid content	100%	/
Surface drying time	30~40min	ISO 1517
Full curing time	3d	ISO 1517
hardness	41	Shore A
Tensile strength	3.5 MPa	ASTM D 412
Dielectric strength	20kV/mm	ASTM D 149
Volume resistivity	3.1 x 1014Ω. Cm	ASTM D 257
Ultraviolet resistance	3000h, no significant change	ASTM G 53
Peel strength with copper and aluminum	30N/cm	ASTM D 412
Thermal shock	No significant change	-50℃~150℃, 200 cycles

Installation method

1.Equipment debugging and loading

2.Equipment hoisting and connection

3.Automatic coating

4.Remove the device

Construction preparation and precautions

The ambient temperature is -10°C to 40°C
No oil fog, wind sand and strong wind pollution around the construction
Outdoor construction, the weather conditions should be good, no rain and snow
Suitable protective gloves should be worn during construction to prepare for all safety and labor protection

Specifications

Model	Specification	Color	Package	Note
X526	4kg/pack	Black	Vacuum	Use with robots

Shelf life and Storage

The storage temperature is 23±5℃ and the relative humidity is 40-50%. The storage period is 12 months from the date of manufacture.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Tags :

Related products

Inflatable Duct Sealing System for Power Cable (IDSS)

The inflatable duct sealing system (IDSS) is a wraparound, inflatable mastic-lined bladder used to seal empty or filled cable ducts. When inflated to proper air pressure, the IDSS seals the duct, guaranteeing a reliable water block. The IDSS can be installed in cable ducts in manhole, vaults, buildings, cabinets, or anywhere a reliable duct seal is needed. Application include ducts containing multiple copper, coax, or fiber cable, customer premise cable entrance, and air pipes. IDSS can be installed between -40℃ to 75℃.

Spacer Tape

COTRAN spacer tape is extruded into two crossed threads that can then divert liquids, leading to its wide usage for casting resin joints in different applications, such as Low- and Medium Voltage, Cable Accessories and 2-component epoxy or PUR Cast Resins. It is engineered to build up voids in odd shaped splices and assures full resin coverage and forms a liquid tight mold.

Oil Resistant Filling Mastic

Applications:

To provide oil resistance, void filling and sealing for oil-immersed cable termination and joints for heat shrink technology up to 36kV.

KC58 Epoxy Glass Fiber Electrical insulating Tape

KC58 epoxy glass fiber electrical insulating tape is a strip of insulating binding material of a certain width, impregnated with a high temperature heat curing epoxy resin by a unidirectional, continuous twist, alkali-free glass fiber yarn after treatment. This tape has good softness and viscosity, opened in a network structure, easy to roll back, no loose wire, no overlap. The product has high strength, impact resistance, high modulus, low elongation, no hysteresis and no eddy current loss and other excellent properties.

KC6001 Non-solidified Sealing Mastic

KC6001 is a kind of butyl rubber mastic, with good viscosity, high temperature resistance (105℃), cold resistance (-40℃), waterproof insulation, never dry and other excellent properties. The product does not contain volatile organic compounds, environmental protection, safety, non-corrosive, suitable for switch cabinets, ring network cabinets, electrical joints, high-speed railway, subway, light rail and other waterproof sealing filling and insulation, easy to form, especially suitable for irregular structure of internal and external sealing.

KC9229 Acrylic Foam Tape

KC9229 acrylic foam tape is a kind of high viscosity fully closed hole acrylic tape made of special acrylic adhesive process. Fully closed cell structure and viscoelasticity give this tape, moisture-proof, water-proof, dust-proof, shock absorption, sound insulation, joint filling and other effects, plastic, metal, wood, paper and silicone and other difficult to stick, uneven surface has a good adhesive effect.

The product maintains good durability in high, low temperature and high temperature and high humidity environment; Excellent adhesion fixing effect for high and low surface energy materials.

New Energy Vehicle Battery Pack Liquid Cold Plate

◆Flexible flow channel design

◆Thin thickness to save space

◆Easy processing and shaping

◆Large thermal dissipation area

◆High heat dissipation efficiency

◆Low leakage risk and highsafety

◆Good pressure resist and strength

◆High production efficiency and yield

COTRAN GHT 225 Military Grade High-temperature Resistant Heat Shrinkable Identification Sleeves

Special designed to meet the requirements of high performance identification of wire and cables in high temperature applications or where extreme resistance to fuels, lubricants and cleaning solvents is required. It is made of special fluoropolymer with excellent electrical, physical, chemical properties and permanent printing properties. Widely used in high-temperature permanent identification industry, military, aerospace, etc.

Categories