KC96 EPDM Cold Shrink Tube

◆ High elastic EPDM rubber tube structure.
◆ Good puncture resistant, abrasion resistance, acid and alkali resistance.
◆ 20 years long lifetime during operation.
◆ Easy to install, only two steps (Cover, pull).
◆ Fast installation, only 15-30 seconds needed to seal one connection.
◆ No limitation of spare space, especially design for narrow space.
◆ Easy to uninstall, only need knife to cut tube open.
◆ No skill required by engineers, uniform quality after installation, stable and good sealing and
◆ Weatherproofing performance.
◆ Much time and labor cost saving.
◆ Good operating capability under hash environmental condition, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone.

Inquiry now

product introduction

Cotran KC96 is an open-ended cold shrink ethylene propylene diene monomer (EPDM) rubber sleeve, which is factory pre-expanded and assembled onto a removable core. The core is removed when the tube is position for installation over an in-line connection or termination lug. It provides a water proofing tight for terminations and joints.

Applications

◆ Protection and repair for outer sheath of high voltage cable joint;

◆ Fire protection of cables and connectors;

◆For all base materials that need to be insulated against fire;

Silicone Cold Shrink Tube

Property

Item		Parameter and Result	Test Method
Waterproof	Class	Pass, IPX7	IEC 60529:1989+A1:1999+A2:2013； 1 meter depth in water, duration: 4 hours
Physical and mechanical properties	Shore Hardness	A/37/1	ASTM D2240-15
	Tensile Strength	≥ 9.6MPa	ASTM D412-15a Method A
	Elongation	≥ 650%	ASTM D412-15a Method A
	Tear Strength	≥ 27 KN/m	ASTM D624-00(2012)
Electricity	Dielectric Strength	≥12 KV/mm	ASTM D149-09(2013) Method A
Material	Environmental protection	RoHS	IEC 62321

Note: This is typical value under lab test, and refer to Cotran KC97 SGS test report.

Models

Model

Color

Cable Size(mm)

Package

KC96-Single

Black

(color can be customized)

Design for 1/2” jumper (7/16 DIN) to Equipment

50 pcs/carton

KC96-Dual

Black

(color can be customized)

Dual-Layerstructure,design for 1/2” jumper (7/16 DIN) to Equipment

50 pcs/carton

Installation Instruction

Step 1
Step 1	1. Wrap the foam tape on the 1/2’’ cable to expand the application outline 2. Put jumper cable inside of the tube, before connectjumper to equipment 3. Arrow symbol will be direction of pulling strip, which usually should be downward
Step 2
	1. Hold the tube, pull stripdownward, and rolling,slowly by slowly 2. Whenpull the white strip till the plastic inner tube is horizontal alignment of the silicone rubber tube, hold cold shrink tube up and attached to bottom of connector on equipment, ensure the tube cover whole metal part of the connector. 3. Hold tube tightly to prevent tube moving, keep pulling strip downward, round and round, till all strip are out.
Step 3
Step 3	1. Hold the foam tape part tightly, clench several times toaccelerate foam tape attached on cables, help EPDM tube shrinking.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Tags :

Related products

Dual Layer Structure EPDM Cold Shrink Tube KC96-DUAL

◆ Dual layer structure,design for 1/2'
◆ Installation Easily
◆ Applicable to a variety of jumpers
◆ Waterproofness IPX8

COTRAN ECap Cold Shrink Rubber EPDM End Cap

CSEC Cold shrink rubber end caps are usually used for environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. Cold shrink EPDM end caps are close-ended, tubular rubber tube that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage, like moisture, contamination and corrosion etc.

Aluminum Roll Bonded Liquid Cold Sheet for Energy Storage

◆High production efficiency

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk andhigh reliability

Wraparound Repair Sleeve

Cotran wraparound repair sleeve (CWRS) is designed to repair damaged cable jackets and protect cable or pipes where needs corrosion protection on undamaged ones. CWRS is made from modified cross-linked polyolefin (XLPE) with a hot-melt adhesive. When heating, the sleeve shrinks and the adhesive melts, thereby achieving tightly bonding between the sleeve and the cable. It provides an excellent solution of protection against mechanical stress, harshest environments, moisture and corrosion.

CWRF is a fiber reinforced repair sleeve, which is composed of XLPE and fiber layer. It can provide better mechanical properties. CWRA is a fiber reinforced and aluminum layer reinforced repair sleeve, which is composed of XLPE, fiber layer, and aluminum layer. It can provide more stronger mechanical properties than CWRS and CWRF.

Heat shrink cable accessories 1KV

Cotran heat shrink terminations and joints are composed of a series of pre-expanded adhesive lined heat shrink tubes and necessary accessories. Heat shrink and provide excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC/PILC, S/C, multi-core cable rated to 0.6/1kV.

64/110KV YJZWGG Pre-Fabricated Dry Outdoor Termination For 64/110kv Xlpe Cable

Pre-fabricated dry termination is integrally composited of stress cone and silicone rubber insulation material.

COTRAN HMWT Medium Wall Heat Shrinkable Tube

COTRAN HMWT medium wall heat shrinkable tube is made from radiation crosslinked polyolefin. Specifically designed formulation makes the tubing to have outstanding physical, chemical and electrical properties, and also meet the requirement of RoHS and other environment concerned standards. It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.