Electrical Insulation Waterproof Vinyl Mastic Tape KC75

KC87 Waterproof Insulation Tape

◆High production efficiency

◆Good heat exchange effect

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Low leak risk and highsecurity

COTRAN 932 is made of special chlorosulfonated polyethylene rubber as the base material, supplemented by two tacky mastic layers of flame retardant and waterproof. It can meet the wear-resistant, waterproof and fire-resistant needs of sheath repair for all types of cables. COTRAN 932 is used to repair of mining cables, outer jacket of mining cable splice kits and splicing of mine conduit.

COTRAN 930 is made of fully vulcanized rubber as the base material, supplemented by one tacky mastic layers of waterproof. It can meet the wear-resistant, waterproof and needs of sheath repair for all types of cables. COTRAN 930 is used in heat shrink and cold shrink field to provide good waterproof, insulation and sealing as the cable joints accessories.

◆ Completely meet the requirements of GB 28374-2012;

◆ Environmental protection halogen-free, non-toxic and harmless;

◆ Good flexibility;

◆ Good insulation performance;

◆ Strong adhesion;

◆ Good fire protection effect;

◆ Good anti-corrosion performance.

• Excellent hygroscopic performance, hygroscopic capacity can reach more than 80% of its own weight, sustainable moisture absorption in high humidity environment.

• Can be used for a long time, the effect of performance does not decay

• With excellent softness, light weight, installation is not limited by the environment, easy to use

• At the same time has the function of moisture absorption, moisture release, maintain stable humidity

• It can also be used normally under zero temperature and does not harden

• Non-toxic environmental protection, can be directly discarded as ordinary garbage

• Non-corrosive, no corrosion when in contact with the equipment in the cabinet

• Reusable。

Applications：

Used to provide insulation protection for cable outdoor termination in order to increase the creepage distance and avoid the formation of sewage for various of rod supporting insulators.

The shear bolt connectors are intended for stranded and solid aluminum and copper cable, low voltage and medium voltage up to 36 kV.

They comprise cable areas 10-400 mm² even bigger for sector cable. There is also a screw sleeve for branches up to a total of 100 mm². The joint with the conductor is achieved by the screws in the connector or terminal being tightened to a predetermined torque.