COTRAN 932 Wear-Resistant Insulating Repair Tape

COTRAN 932 is made of special chlorosulfonated polyethylene rubber as the base material, supplemented by two tacky mastic layers of flame retardant and waterproof. It can meet the wear-resistant, waterproof and fire-resistant needs of sheath repair for all types of cables. COTRAN 932 is used to repair of mining cables, outer jacket of mining cable splice kits and splicing of mine conduit.

Inquiry now

product introduction

Product Features

The outer layer is made of super wear-resistant material
Unique three-layer composite structure, excellent waterproof performance
Lead-free flame retardant, good thermal conductivity
Oil and corrosion resistance, acid and alkali resistance and various chemical corrosion
Anti-ozone, ultraviolet, xenon lamp aging

Technical Properties

No.	Performance indicators	Typical value	Test method
1	Thickness	1.30 mm	ASTM D 1000
2	Tensile strength	7.0 MPa	ASTM D 412
3	Elongation at break	500%	ASTM D 412
4	Thermal aging test (90℃/168h)	Through	ASTM D 4325
5	Waterproof grade	IPX8	GB/T 4208-2008
6	Flame retardant grade	V-1	UL 94
7	Dielectric strength	10kV/mm	ASTM D 4325

Installation

1. Clean the dust and oil on the covered surface;

2. Remove the product release paper, the stretching rate is 10%~ 50%, and the winding is wound with 50% overlap rate;

3. The starting point and ending point of tape winding exceed 30~ 50mm at both ends of the coating part.

Specification

Width × Thickness × Length: 51mm × 1.3mm × 2.6m;

Packing information: 20 rolls/carton

Storage

COTRAN 932 should be stored in original packaging, placed in horizontal position under cover and in a humidity controlled storage (5°C to 35°C and <75% relative humidity).

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : COTRAN 932 Wear-Resistant Insulating Repair Tape

Tags :

Related products

High Frequency Welding Aluminum Liquid Cooled Tube

◆High production efficiency

◆Large thermal contact area

◆Uniform and stable welding

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high security

Flexible Fireproof and Explosion-proof Blanket KC9001

KC9001 Flexible fireproof and explosion-proof blanket is suitable for the outer wrapping of the cable straight joint. It adopts multi-layer protective structure to cover the cable straight joint. The outer layer is made of ablation-resistant fireproof cloth with built-in flexible nano thermal insulation sheet and high strength aramid fiber cloth. When the fire broke out, the built-in can flexible nano can get insulation sheet is 3 ~ 4 times of that of the traditional performance, at the same time the highest heat resistance is above 1200 ℃, and it has excellent flame retardant and heat insulation effect, and the built-in high strength aramid fiber cloth can avoid the middle joint breakdown exploded the harm of adjacent cables, avoid the secondary damage caused by the fire. KC9001 light flexible fireproof blanket is easy to install, and it can be easily installed outside the cable intermediate connector after construction by means of pre-installed fire-resistant tie belt and D-type ring clasp without other tools.

Insulating Busbar Cover Protection up to 11 KV, 24KV, 36KV

Product Introduction

Made from specially formulated radiation cross-linked compounds. It can provide high resistance to tracking and arcing. Used to enhance the insulation properties of busbar in switch and substation to safe protect up to safe protect up to 11 kv, 24kv, 36kv.

Foam Sealing Material KC5000

KC5000 foam sealing material is made of A and B material after proper proportion of mixing, chemical reaction and form foaming body. Before it becomes a foaming body, the product is in liquid form and has good fluidity. It can be extremely well applied to fire proof and moisture-proof plugging at the bottom of various electrical and communication panels and cabinets, fire proof and moisture-proof plugging at the opening of complex perforating pipe fittings, etc. The foam sealing material by fire, heat and other high temperature will produce expanded carbon layer, can effectively prevent the spread of fire combustion and heat transfer, so it can provide good protection for non-fire surface, according to GB 23864-2009 standard requirements, with a 1.5h fire aging. In addition, the product in the harsh, dirty environment, still can maintain the normal fire and moisture-proof function.

Electric Vehicle Power Cylindrical Battery Liquid Cooling Tube

◆High material utilization

◆Large thermal dissipation area

◆Battery side thermal dissipation

◆High thermal dissipation efficiency

◆Low leakage risk and high reliability

◆Stable and high production efficiency

◆Reduce the weight of the battery pack

◆Improve the battery life and performance

Cold Shrink Cable Accessories 1KV

Cotran cold shrink terminations and joints are composed of a series of pre-expanded silicone tubes and necessary accessories. The core is removed after the tube is positioned for installation over an inline connection, or terminal lug, allowing the tube to shrink and provide a excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC, Single-core and multi-core cable rated to 0.6/1kV.

COTRAN Z551 Self-Fusing Silicon Rubber Tape

COTRAN Z551 self-fusing silicon rubber tape is composed of self-fusing silicone rubber and easily removed liner. It has excellent resistance to tracking, ozone, UV, corrosion, water and continuous operating temperature of -50℃～180℃. It can be used in dirty areas. Suitable for busbar insulation protection and phase identification, Insulation for terminations and joints of high-voltage power cables up to 35kV, Insulation for submarine cables, submersible motors, large-sized generators, automobiles, aero engines and other electrical equipment.