COTRAN 932 Wear-Resistant Insulating Repair Tape

COTRAN 932 is made of special chlorosulfonated polyethylene rubber as the base material, supplemented by two tacky mastic layers of flame retardant and waterproof. It can meet the wear-resistant, waterproof and fire-resistant needs of sheath repair for all types of cables. COTRAN 932 is used to repair of mining cables, outer jacket of mining cable splice kits and splicing of mine conduit.

Product Features

  • The outer layer is made of super wear-resistant material
  • Unique three-layer composite structure, excellent waterproof performance
  • Lead-free flame retardant, good thermal conductivity
  • Oil and corrosion resistance, acid and alkali resistance and various chemical corrosion
  • Anti-ozone, ultraviolet, xenon lamp aging


Technical Properties

No.

Performance indicators

Typical value

Test method

1

Thickness

1.30 mm

ASTM D 1000

2

Tensile strength

7.0 MPa

ASTM D 412

3

Elongation at break

500%

ASTM D 412

4

Thermal aging test (90℃/168h)

Through

ASTM D 4325

5

Waterproof grade

IPX8

GB/T 4208-2008

6

Flame retardant grade

V-1

UL 94

7

Dielectric strength

10kV/mm

ASTM D 4325


Installation

1. Clean the dust and oil on the covered surface;

2. Remove the product release paper, the stretching rate is 10%~ 50%, and the winding is wound with 50% overlap rate;

3. The starting point and ending point of tape winding exceed 30~ 50mm at both ends of the coating part.


Specification

Width × Thickness × Length: 51mm × 1.3mm × 2.6m;

Packing information: 20 rolls/carton


Storage

COTRAN 932 should be stored in original packaging, placed in horizontal position under cover and in a humidity controlled storage (5°C to 35°C and <75% relative humidity).

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
Roll Bonded Cooling Plate
Roll Bonded Cooling Plate for Battery Energy Storage System

◆High production efficiency

◆Good heat exchange effect

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Low leak risk and high security

Cold Shrink cable Breakout
Cold Shrink 3 cores cable Breakout (1~36kV)


Applications:

Used to provide insulation protection for cable termination and straight joint.


Roll Bonded Liquid Cooling Plate
Battery Energy Storage Roll Bonded Liquid Cooling Plate

◆High production efficiency

◆Large thermal contact area

◆Uniform and stable welding

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high security

Composite Fireproof Board
Metal Composite Fireproof Board KC8000
KC8000 is a metal composite fireproof board with heated expansion property, it is composed of stainless steel plate, fire layer, wire mesh, aluminum foil, totally four layers of structure.
Non-solidified Fireproof Mastic
High Temperature Non-solidified Fireproof Mastic KC7000
  • Thermal expansion,
  • Elastic material, good plasticity, easy to install and operate
  • It can be used for repeated installation
  • Good adhesion to the substrate, outdoor long-term use of no vertical flow
  • Environment-friendly, halogen-free formula
  • Asbestos-free, non-toxic
  • No volatile organic matter
Cold Shrink Termination
Cold Shrink Cable Accessories 1KV

Cotran cold shrink terminations and joints are composed of a series of pre-expanded silicone tubes and necessary accessories. The core is removed after the tube is positioned for installation over an inline connection, or terminal lug, allowing the tube to shrink and provide a excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC, Single-core and multi-core cable rated to 0.6/1kV.

Heat Shrink End Cap
Heat Shrink End Cap

Applications:

Recommended for applications both in open air and underground power distribution cables with PVC ,lead or XLPE sheaths.


Moisture-controlling tablets
Anti-condensation Moisture-controlling Tablets KC4000
  • Excellent hygroscopic performance, hygroscopic capacity can reach more than 80% of its own weight, sustainable moisture absorption in high humidity environment.
  • Can be used for a long time, the effect of performance does not decay
  • With excellent softness, light weight, installation is not limited by the environment, easy to use
  • At the same time has the function of moisture absorption, moisture release, maintain stable humidity
  • It can also be used normally under zero temperature and does not harden
  • Non-toxic environmental protection, can be directly discarded as ordinary garbage
  • Non-corrosive, no corrosion when in contact with the equipment in the cabinet
  • Reusable
Subscribe
Subscribe to our newsletter and stay up to date with the latest news and deals !

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact