EPR Electrical Semi-conducting Tape KC72

◆ Can be used to repair XLPE cable terminations and joints or shielding for other devices up to 110kV.

◆ Retains its conductivity when stretched.

◆ Semi-conducting (low resistivity).

◆ Suitable for irregular shapes cable with good elongation.

◆ Withstand high temperatures (130°C/266°F) short-term overload.

◆ Compatible with all solid dielectric cable insulations and conductors.

◆ Resistance to ozone, solvents, UV, xenon exposure and moisture.

◆ Suitable for indoor or outdoor applications.

◆ Operation and installation easily.

◆ Increases its conductance and will not harm it in any way.

Inquiry now

product introduction

Product Description

Cotran Brand KC72 electrical semi-conducting tape is a Highly conformable, self-fusing, semi-conducting ethylene

propylene rubber(EPR) based, high voltage splicing tape. KC72 is used for repairing of XLPE cable terminations

and joints or shielding for other devices up to 110kV.

Applications

◆ Uniform electric field in high electric field, to minimize electrical stresses in

◆ Continue semi-conducting strand shielding found in solid dielectric cables above 5kV.

◆ Provide shielding layer for solid dielectric insulated cable.

◆ Repair the semi-conducting layer beneath metallic shield of similar cables in case of damage

◆ Make conductive portion of stress cone of power cable termination on solid dielectric insulated cables.

Test Parameters

No.	Test Item	Result	Test Method
1	Color	Black
2	Thickness	0.76mm	ASTM D4325
3	Tensile Strength	＞1.73MPa	ASTM D4325
4	Elongation at Break	＞935%	ASTM D4325
5	Water absorption	0.19%	ASTM D570-98
6	Volume resistivity	＜7x10⁶Ώ.cm	ASTM-D4325
7	Heat ageing(130℃ 168H)	Pass	ASTM D4325
8	UV ageing	Pass	ASTM D4325
9	Xenon ageing	Pass	ISO 4892-2

Installation

Cotran Brand KC72 electrical semi-conducting tape is usually wrapped in half-lapped layers. With excellent elongation, stretched overwrapping the connectors, terminals, and metallic shield of power cable.

Step 1 Wipe off the dusts on the power cable area before wrapping.

Step 2 Remove the liner and stretch the tape to 1 to 2 times of its original length, apply the tape in 50%-lapped toward area to the wrapped. Stretching the tape to 4 times of its original length is not recommended.

Step 3 Overwrapping the electrical semi-conducting tape on the power cable on the needed area.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : EPR Electrical Semi-conducting Tape KC72

Tags :

Related products

EPR High Voltage Insulation Tape KC71

◆ Can be used to splice and terminate cable, the emergency overload temperatures can reach 130℃.

◆ Based on Ethylene Propylene Rubber(EPR).

◆ Physical and electrical properties are unaffected by the degree of stretch.

◆ Self-fusing tape.

◆ Excellent electrical properties.

◆ A special polyester liner which will not stick to the tape upon unwind.

◆ Operation and installation easily.

◆ Compatible with all solid dielectric cable insulation:

Polyethylene (high and low density).

Cross-linked polyethylene (XLPE).

Polyvinyl chloride (PVC).

Butyl rubber.

Robotic Coating Tornado X526

COTRAN tornado X526 light insulation material is a self-curing insulating coating material for robot coating. The coating material can be quickly constructed and cured at room temperature. After curing, it has good insulation properties, ultraviolet resistance, strong adhesion, mechanical wear resistance and heat resistance.

The robot coating device is composed of walking module, coating module and wireless control system. It can carry out automatic insulation treatment for 35kV and below overhead bare wires, and can work with live line, automatic up and down line, safe construction, convenient and efficient. After processing, it can effectively prevent insulation hazards such as tree barriers, small animal contact, and external short circuit, and improve the reliability of the power supply of the distribution network.