COTRAN ECap Cold Shrink Rubber EPDM End Cap

COTRAN Cold shrink rubber end caps are usually used for environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. Cold shrink EPDM end caps are close-ended, tubular rubber tube that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage, like moisture, contamination and corrosion etc.

Inquiry now

product introduction

Features

Simple and fast installation, no tools required.
Accommodates size ranges from 11.6mm – 84.6mm.
Seals tight, retains resiliency and pressure even after prolonged years of ageing and exposure.
Water-resistant.
No mastic or tape required.
No torches or heat required.
Resists acids and alkalis.
Resists ozone.
Easily removed.
No training required for installation

Technical Properties

Properties	Test Method	Typical Data
Waterproof	IEC 60529:1989	Pass, IPX7
Shore Hardness	ASTM D2240-15	40~45
Tensile Strength	ASTM D412-15a	≥8.5 MPa
Elongation	ASTM D412-15a	≥ 650%
Tear Strength	ASTM D624-00(2012)	≥30 kN/m
Dielectric Strength	ASTM D149-09(2013)	22.4 kV/mm
Environmental protection	IEC 62321	RoHS
UV resistance	ASTM D 4388	Pass
Ozone resistance	ASTM D 4388	Pass

Selection table

Type	Color	Cable Size(mm)	Package
ECap-1	Black	11.6 – 20.9	100 pcs/carton
ECap-2	Black	15.9 – 30.1	100 pcs/carton
ECap-3	Black	26.0 – 49.2	100 pcs/carton
ECap-4	Black	45.5 – 84.3	100 pcs/carton

Installation

COTRAN ECap cold shrink end caps install quickly and cleanly without flame or grease. Cold shrink end caps are factory expanded on removable inner-supporting plastic cores. Once the end cap is positioned for installation around the end of a cable, the supporting core is unwound and removed. With the core removed, the live-memory action of the specially formulated material shrinks the end cap into position. The constant radial pressure of the Cold Shrink material ensures adorable environmental seal. The cold shrink material resists abrasion, fungus, acids or alkalis, and retains its resiliency for years. Freezing or overheating due to ambient temperatures encountered during shipping or storage does not impair the end caps.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : COTRAN ECap Cold Shrink Rubber EPDM End Cap

Tags :

Related products

KC96 EPDM Cold Shrink Tube

◆ High elastic EPDM rubber tube structure.
◆ Good puncture resistant, abrasion resistance, acid and alkali resistance.
◆ 20 years long lifetime during operation.
◆ Easy to install, only two steps (Cover, pull).
◆ Fast installation, only 15-30 seconds needed to seal one connection.
◆ No limitation of spare space, especially design for narrow space.
◆ Easy to uninstall, only need knife to cut tube open.
◆ No skill required by engineers, uniform quality after installation, stable and good sealing and
◆ Weatherproofing performance.
◆ Much time and labor cost saving.
◆ Good operating capability under hash environmental condition, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone.

Dual Layer Structure EPDM Cold Shrink Tube KC96-DUAL

◆ Dual layer structure,design for 1/2'
◆ Installation Easily
◆ Applicable to a variety of jumpers
◆ Waterproofness IPX8

Silicone rubber cold shrink tube En-CST

◆IPX8 class, stable and long-life during operation

◆Easy to install, only two steps (Cover, pull)

◆Fast installation, only 15-30 seconds needed to seal one connection

◆No limitation of spare space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,

◆Easy to uninstall, only need knife to cut tube open

◆No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance

◆Much time cost, and labor cost saving

◆Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone

COTRAN Insulation Piercing Connector (JJC series)

Product Applications COTRAN JJC series insulation piercing connectors are applicable for all types of LV-ABC conductors as well as connections in service line system, building electrical system and street lighting system. installation of JJC can be easily done by tightening bolts to forceteeth penetrate insulation of main line and tap line simultaneously. Stripping of insulation is avoided for both lines. Feature Material: insulation material made of weather resistant polymer. Contact teeth made of tinned brass or copper or aluminum. Meet standard requirements: EN 50483-4, NF C33-020, NF C33-004 Specification Type Main line section (mm²) Branch section (mm²) rated current (A) Dimensions (mm) Weight (g) Piercing Depth (mm) No. of bolts JJC888 0.75-6 0.75-6 41 21*27*23 10 1-1.5 1 JJC-1 1.5-25 1.5-10 55 27*41*62 55 1.5-2 1 JJC-2 16-95 1.5-10 55 27*41*62 55 1-2 1 JJC-3(A) 6-50 4-25 157 42*45*62 110 2.5-3.5 1 JJC-3 16-95 4-35(50) 157 46*52*87 160 2.5-3.5 1 JJC-4 50-150 6-35(50) 157 46*52*87 162 2.5-3.5 1 JJC-5 25-95 25-95 214 50*61*100 198 3-4 1 JJC-5-1 16-120 16-120 214 50*61*100 198 3-4 1 JJC-6 (35)50-150 (35)50-150 316 50*61*100 280 3-4 1 JJC-7 120-240 25-120 276 52*68*100 360 3-4 1 JJC-7-1 150-240 10-25 102 52*68*100 336 3-4 1 JJC-8 95-400 35-300 425 83*130*130 1050 5-6 2

Bi-Metal Cable Lug and Connector

Bi-metal cable lug and Bi-metal cable connector are made from the highest quality aluminium and copper. Joined using a friction welding process.

COTRAN HHWT Co-Extruded Heavy Wall Heat Shrinkable Tubing With Adhesive

COTRAN HHWT co-extruded heavy wall heat shrinkable tubing with hot melting adhesive is made from radiation crosslinked polyolefin. Specifically designed formulation makes the tubing to have outstanding physical, chemical and electrical properties, and also meet the requirement of RoHS and other environment concerned standards. It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.

COTRAN Z551 Self-Fusing Silicon Rubber Tape

COTRAN Z551 self-fusing silicon rubber tape is composed of self-fusing silicone rubber and easily removed liner. It has excellent resistance to tracking, ozone, UV, corrosion, water and continuous operating temperature of -50℃～180℃. It can be used in dirty areas. Suitable for busbar insulation protection and phase identification, Insulation for terminations and joints of high-voltage power cables up to 35kV, Insulation for submarine cables, submersible motors, large-sized generators, automobiles, aero engines and other electrical equipment.