COTRAN ECap Cold Shrink Rubber EPDM End Cap

CSEC Cold shrink rubber end caps are usually used for environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. Cold shrink EPDM end caps are close-ended, tubular rubber tube that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage, like moisture, contamination and corrosion etc.

Inquiry now

product introduction

Features

Simple and fast installation, no tools required.
Accommodates size ranges from 11.6mm – 84.6mm.
Seals tight, retains resiliency and pressure even after prolonged years of ageing and exposure.
Water-resistant.
No mastic or tape required.
No torches or heat required.
Resists acids and alkalis.
Resists ozone.
Easily removed.
No training required for installation

Technical Properties

Properties	Test Method	Typical Data
Waterproof	IEC 60529:1989	Pass, IPX7
Shore Hardness	ASTM D2240-15	40~45
Tensile Strength	ASTM D412-15a	≥8.5 MPa
Elongation	ASTM D412-15a	≥ 650%
Tear Strength	ASTM D624-00(2012)	≥30 kN/m
Dielectric Strength	ASTM D149-09(2013)	22.4 kV/mm
Environmental protection	IEC 62321	RoHS
UV resistance	ASTM D 4388	Pass
Ozone resistance	ASTM D 4388	Pass

Selection table

Type	Color	Cable Size(mm)	Package
ECap-1	Black	11.6 – 20.9	100 pcs/carton
ECap-2	Black	15.9 – 30.1	100 pcs/carton
ECap-3	Black	26.0 – 49.2	100 pcs/carton
ECap-4	Black	45.5 – 84.3	100 pcs/carton

Installation

COTRAN ECap cold shrink end caps install quickly and cleanly without flame or grease. Cold shrink end caps are factory expanded on removable inner-supporting plastic cores. Once the end cap is positioned for installation around the end of a cable, the supporting core is unwound and removed. With the core removed, the live-memory action of the specially formulated material shrinks the end cap into position. The constant radial pressure of the Cold Shrink material ensures adorable environmental seal. The cold shrink material resists abrasion, fungus, acids or alkalis, and retains its resiliency for years. Freezing or overheating due to ambient temperatures encountered during shipping or storage does not impair the end caps.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : COTRAN ECap Cold Shrink Rubber EPDM End Cap

Tags :

Related products

KC96 EPDM Cold Shrink Tube

◆ High elastic EPDM rubber tube structure.
◆ Good puncture resistant, abrasion resistance, acid and alkali resistance.
◆ 20 years long lifetime during operation.
◆ Easy to install, only two steps (Cover, pull).
◆ Fast installation, only 15-30 seconds needed to seal one connection.
◆ No limitation of spare space, especially design for narrow space.
◆ Easy to uninstall, only need knife to cut tube open.
◆ No skill required by engineers, uniform quality after installation, stable and good sealing and
◆ Weatherproofing performance.
◆ Much time and labor cost saving.
◆ Good operating capability under hash environmental condition, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone.

Dual Layer Structure EPDM Cold Shrink Tube KC96-DUAL

◆ Dual layer structure,design for 1/2'
◆ Installation Easily
◆ Applicable to a variety of jumpers
◆ Waterproofness IPX8

Aluminum Roll Bonded Liquid Cold Sheet for Energy Storage

◆High production efficiency

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk andhigh reliability

TPO SEALING TAPE

Product Description

TPO sealing tape combines both polypropylene(plastic) and ethylene-propylene (rubber)using state-of-the-art extruding manufacturing technology, which exhibits excellent versatile physical properties of plastic and rubber. Featured with pliable and weldable properties, COTRAN TPO delivers its unique high elasticity under normal condition and its superior plasticity under extreme temperature. Therefore its excellent physical and chemical parameters(high tensile strength and elongation) forges its unbeatable quality.Being commercial roofing system that is reliable, cost effective,environmentally friendly and easy to install, COTRAN TPO is mostly suited for single ply light steel roofs.

Elbow Surge Arrester (6~15kV)

Applications：

suitable for American 200A electrical system, installed on the 200A interface of the high voltage outlet of American box substation, ring main cabinet, cable branch box, buried transformer and other electrical equipment to provide overvoltage protection for electrical equipment.

The product interface complies with the 200A casing design in the standard IEEE386.

Heat Shrink Busbar Insulation Tape

Product Introduction

Made from radiation cross-linked polyolefin. The dual layer structure of insulation/hot melt adhesive effectively provides electric insulation and shock protection to busbar up to 24KV. Widely used to protect irregular shape busbar or connectors where tube products can not be applied.

64/110KV YJZGG Prefabricated Insulating Joint/ Straight Through Joint For 64/110kv Xlpe Cable

1. The body of joint is made of imported silicone rubber with good quality, so it is with high strength, elasticity and tear resistance as well as excellent thermal

aging resistance.

2. The body of joint has integral pre-fabricate structure with high voltage shielded, stress cone and insulating injection pressed integration, so it has excellent properties and easy to test as well as install.

3. The body of joint is analized and computed optimization by finite element software, so it has more resonable field-intensity distribution and high insulation safety margin.

4. The body of insulating joint and straight through joint is the same, the d ifference is just the handling of shielding on-site installation, insulating joint with one side insulated and the rest shielded while staight through joint full shielded.

5. The joint has completely sealed structure with high mechanical strength and good sealing performance.

6. Joint protecting is made of insulating copper case with high-intensitive T2 copper, and the moulded high-density PE material of its external surface is used for insulation and anti-corrosion with good mechanical protection and permanent waterproof sealing performance, which ensure the joint to run safely and reliably in the long-term under harsh environment.In addition, it can equip glass fiber reinforced plastic protective box as a strengthen waterproof measure accordingly.

7. Special installer tools make the installation more convenient.