COTRAN 932 Wear-Resistant Insulating Repair Tape

COTRAN 932 is made of special chlorosulfonated polyethylene rubber as the base material, supplemented by two tacky mastic layers of flame retardant and waterproof. It can meet the wear-resistant, waterproof and fire-resistant needs of sheath repair for all types of cables. COTRAN 932 is used to repair of mining cables, outer jacket of mining cable splice kits and splicing of mine conduit.

Inquiry now

product introduction

Product Features

The outer layer is made of super wear-resistant material
Unique three-layer composite structure, excellent waterproof performance
Lead-free flame retardant, good thermal conductivity
Oil and corrosion resistance, acid and alkali resistance and various chemical corrosion
Anti-ozone, ultraviolet, xenon lamp aging

Technical Properties

No.	Performance indicators	Typical value	Test method
1	Thickness	1.30 mm	ASTM D 1000
2	Tensile strength	7.0 MPa	ASTM D 412
3	Elongation at break	500%	ASTM D 412
4	Thermal aging test (90℃/168h)	Through	ASTM D 4325
5	Waterproof grade	IPX8	GB/T 4208-2008
6	Flame retardant grade	V-1	UL 94
7	Dielectric strength	10kV/mm	ASTM D 4325

Installation

1. Clean the dust and oil on the covered surface;

2. Remove the product release paper, the stretching rate is 10%~ 50%, and the winding is wound with 50% overlap rate;

3. The starting point and ending point of tape winding exceed 30~ 50mm at both ends of the coating part.

Specification

Width × Thickness × Length: 51mm × 1.3mm × 2.6m;

Packing information: 20 rolls/carton

Storage

COTRAN 932 should be stored in original packaging, placed in horizontal position under cover and in a humidity controlled storage (5°C to 35°C and <75% relative humidity).

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : COTRAN 932 Wear-Resistant Insulating Repair Tape

Tags :

Related products

KC6001 Non-solidified Sealing Mastic

KC6001 is a kind of butyl rubber mastic, with good viscosity, high temperature resistance (105℃), cold resistance (-40℃), waterproof insulation, never dry and other excellent properties. The product does not contain volatile organic compounds, environmental protection, safety, non-corrosive, suitable for switch cabinets, ring network cabinets, electrical joints, high-speed railway, subway, light rail and other waterproof sealing filling and insulation, easy to form, especially suitable for irregular structure of internal and external sealing.

Fire Retardant Coating for Electrical Cables

Cable Fireproof Coating KC2000

◆ Completely meet the requirements of GB 28374-2012;

◆ Environmental protection halogen-free, non-toxic and harmless;

◆ Good flexibility;

◆ Good insulation performance;

◆ Strong adhesion;

◆ Good fire protection effect;

◆ Good anti-corrosion performance.

Primer for Anti-Corrosion Tape

The anticorrosive primer and PE anticorrosive tape together constitute the polyethylene cold wound anticorrosive system. Coated on the surface treatment of steel tube, can fill a small bump on the surface of the steel tube, and can increase the adhesive tape with sticky relay between steel tube, at the same time it is also a kind of excellent corrosion inhibitor.

COTRAN FEP 200℃ Temperature Resistant FEP Heat Shrinkable Tubing

FEP heat shrinkable tubing is made of FEP with excellent 200℃ high-temperature performance, chemical resistance, high insulation and excellent mechanical properties. FEP has excellent abration resistance and excellent clarity. Designed to provide insulation and mechanical protection in severe chemical and thermal environments. Widely used in electronic, aerospace, military and communication fields.

Electrical Insulation Waterproof Vinyl Mastic Tape KC75

KC75 is a self-fusing, conformable, vinyl backing mastic tape. KC75 seals out moisture and protects against corrosion without the need for heating tools or using multiple tapes. KC75 is designed for cable sheath repair, low voltage insulating, conduit repair and protection of CATV components as well as other general taping applications. Application Electrostatic shielding solid dielectric cable connector and terminal Filling all kinds of irregular joint Repair of high-voltage connector conductor shielding layer Other shielding occasions Technical Data Property Typical Value Test Method Adhesion to steel 18.7N/10mm ASTM D 1000 Adhesion to PE 20.2N/10mm ASTM D 1000 Dielectric strength 21KV/mm ASTM D 4325 Volume Resistivity 1.66*10^34 Ω ASTM D 1000 Water Absorption 0.2% ASTM D 4325 Packing Part No. Dimension Color Rolls/Case KC75 38mm*0.635mm*6m Black 40 Note: Other size is available on request.

Wraparound Repair Sleeve

Cotran wraparound repair sleeve (CWRS) is designed to repair damaged cable jackets and protect cable or pipes where needs corrosion protection on undamaged ones. CWRS is made from modified cross-linked polyolefin (XLPE) with a hot-melt adhesive. When heating, the sleeve shrinks and the adhesive melts, thereby achieving tightly bonding between the sleeve and the cable. It provides an excellent solution of protection against mechanical stress, harshest environments, moisture and corrosion.

CWRF is a fiber reinforced repair sleeve, which is composed of XLPE and fiber layer. It can provide better mechanical properties. CWRA is a fiber reinforced and aluminum layer reinforced repair sleeve, which is composed of XLPE, fiber layer, and aluminum layer. It can provide more stronger mechanical properties than CWRS and CWRF.