Metal Shielding Mesh Tape for Power Cable KC84

◆High production efficiency

◆Large thermal transfer area

◆Flexible flow channel design

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Goodthermal exchange effect

◆Low leak risk and high security

Applications：

designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.

Designed for insulation of copper and aluminum busbars- for electrical substations and switchgear cabinets. Can be used for exterior installations

Shrink ratio: 2.5:1

Operating voltage: 35 kV

Material: polyolefin, halogen-free «HF»

Analogs: BPTM (Raychem); BBI (3M)

Resistant to the phenomenon of tracking and UV radiation

High dielectric strength

Color: brick red

The use of tubes ТТШ allows shortening the distance between phase busbars and significantly reducing the dimensions of the device

Protects electrical busbars against chemical corrosion

Protects equipment from short circuits in case of contact of electrical devices with animals and birds

◆ High tensile strength.

◆ High elongation.

◆ Good insulation property.

◆ Excellent electrical properties.

◆ Good shape retention.

◆ Operation and installation easily.

The anticorrosive primer and PE anticorrosive tape together constitute the polyethylene cold wound anticorrosive system. Coated on the surface treatment of steel tube, can fill a small bump on the surface of the steel tube, and can increase the adhesive tape with sticky relay between steel tube, at the same time it is also a kind of excellent corrosion inhibitor.

KC9000 heat-absorbing and fireproof blanket is a fireproof product that can be directly coated on the external protection of equipment, power cable, cable bridge, etc., which can effectively prevent flame spread and reduce the serious damage caused by high temperature conduction.

◆ High elastic silicone rubber tube structure with mastic built-in, dual layers design can bring double guarantee of weatherproofing protection；
◆ IPX8 class, stable and long-life during operation；
◆ Easy to install, only two steps (Cover, pull)；
◆ Fast installation, only 15-30 seconds needed to seal one connection；
Easy to uninstall, only need knife to cut tube open；
◆ No limits for installation space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,
◆ No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance；
◆ Much time cost, and labor cost saving；
◆ Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone；

◆High production efficiency

◆Good heat exchange effect

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Low leak risk and high security