Electrical Insulation Waterproof Vinyl Mastic Tape KC75

KC1002 is a fireproof, waterproof sealant, specially designed for building and industrial fire sealing, excellent fire performance, has good weather resistance, high and low resistance and bonding

Product introduction

Made of modified radiation crosslinked elastomer, it has excellent resistance to diesel oil, chemical agents, high temperature fluids, long-term heat resistance and wear resistance. It is used for the protection of military or automotive cable terminals, separation joints, etc., and the working temperature range of the cable harness is wide, and the environment of diesel, aviation fuel, hydraulic oil, lubricating oil and other fluids is required.

The shear bolt connectors are intended for stranded and solid aluminum and copper cable, low voltage and medium voltage up to 36 kV.

They comprise cable areas 10-400 mm² even bigger for sector cable. There is also a screw sleeve for branches up to a total of 100 mm². The joint with the conductor is achieved by the screws in the connector or terminal being tightened to a predetermined torque.

◆ High tensile strength.

◆ Flame retardant.

◆ High elongation at break.

◆ The back is rubber pressure-sensitive adhesive with good initial viscosity and bonding strength.

◆ Excellent electrical properties.

◆ Withstand high/low temperature.

◆ Operation and installation easily.

◆High production efficiency

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high reliability

◆High production efficiency

◆Good heat exchange effect

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Low leak risk and high security

KC5000 foam sealing material is made of A and B material after proper proportion of mixing, chemical reaction and form foaming body. Before it becomes a foaming body, the product is in liquid form and has good fluidity. It can be extremely well applied to fire proof and moisture-proof plugging at the bottom of various electrical and communication panels and cabinets, fire proof and moisture-proof plugging at the opening of complex perforating pipe fittings, etc. The foam sealing material by fire, heat and other high temperature will produce expanded carbon layer, can effectively prevent the spread of fire combustion and heat transfer, so it can provide good protection for non-fire surface, according to GB 23864-2009 standard requirements, with a 1.5h fire aging. In addition, the product in the harsh, dirty environment, still can maintain the normal fire and moisture-proof function.