Cold Shrink Cable Accessories 1KV

Cotran cold shrink terminations and joints are composed of a series of pre-expanded silicone tubes and necessary accessories. The core is removed after the tube is positioned for installation over an inline connection, or terminal lug, allowing the tube to shrink and provide a excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC, Single-core and multi-core cable rated to 0.6/1kV.

Inquiry now

product introduction

Cold Shrink Termination

Main Kit Components

Main insulation tube	Breakout	Sealants	PVC coding tape
Spring roll	Braid	Instruction

Selective Chart

Part NO.	Cable cross-section (mm2)	Voltage
CCST-LV-Y/1	16-35	0.6/1kV
CCST-LV-Y/2	35~95	0.6/1kV
CCST-LV-Y/3	95～240	0.6/1kV
CCST-LV-Y/4	300～400	0.6/1kV

Notes: Y indicates numbers of cores.

Cold Shrink Straight Joint

Main Kit Components

Main insulation tube	ERP insulation tape	Sealants	Water-proof rubber tape
Spring roll	Armor tape	Braid	Instruction

Selective Chart

Part NO.	Cable cross-section (mm2)	Voltage
CCSJ--LV-Y/1	16-35	0.6/1kV
CCSJ--LV-Y/2	35~95	0.6/1kV
CCSJ-LV-Y/3	95～240	0.6/1kV
CCSJ-LV-Y/4	300～400	0.6/1kV

Notes: Y indicates numbers of cores.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Cold Shrink Cable Accessories 1KV

Tags :

Related products

Cold Shrink Cable Accessories 10-36KV

Cotran cold shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48 class 1, IEEE-404, IEC60502. Our cold shrink terminations oﬀers reliable and consistent performance for longer service life. We have designed our cold shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36kV.

Cold Shrink 3 cores cable Breakout (1~36kV)

Applications：

Used to provide insulation protection for cable termination and straight joint.

New Energy Power Battery Harmonica Water Cold Tubes

◆High material utilization

◆Battery side heat dissipation

◆Large thermal dissipation area

◆High thermal dissipation efficiency

◆Low leakage risk and high reliability

◆Stable and high production efficiency

◆Reduce the weight of the battery pack

◆Improve the battery life and performance

Aluminum Extruded Liquid Cooled tube for New Energy Vehicles

◆High processing efficiency

◆Lower energy consumption

◆Large thermal transfer area

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Excellent thermal performance

◆Low leak risk and high reliability

◆Good tightness and high strength

High Frequency Welding Aluminum Liquid Cooled Tube

◆High production efficiency

◆Large thermal contact area

◆Uniform and stable welding

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high security

Heat Shrink protective Tube (1~36kV)

Applications：

designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.

KC58 Epoxy Glass Fiber Electrical insulating Tape

KC58 epoxy glass fiber electrical insulating tape is a strip of insulating binding material of a certain width, impregnated with a high temperature heat curing epoxy resin by a unidirectional, continuous twist, alkali-free glass fiber yarn after treatment. This tape has good softness and viscosity, opened in a network structure, easy to roll back, no loose wire, no overlap. The product has high strength, impact resistance, high modulus, low elongation, no hysteresis and no eddy current loss and other excellent properties.