Cold Shrink Cable Accessories 10-36KV

Cotran cold shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48 class 1, IEEE-404, IEC60502. Our cold shrink terminations oﬀers reliable and consistent performance for longer service life. We have designed our cold shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36kV.

Inquiry now

product introduction

Main Kit Components

Termination body	Cold shrink tubes	Breakout	Braid
Spring roll	Sealants	Instruction

Cold Shrink Straight Joints

Cotran cold shrink straight through joints are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48 class 1, IEEE-404, IEC60502. Our cold shrink straight through joints oﬀers reliable and consistent performance for longer service life. We have designed our cold shrink straight joints for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36kV.

Main Kit Components

Joint body	Metal shielding mesh	Armor tape	Waterproof tape
Spring roll	Spring roll	Sealants	Instruction

Product Features

Safety: Without using torches or any auxiliary tools.
Stability: The geometric stress cone and insulator of cold-shrink terminations keep the active pressure and steady long-term operation to cable.
Wide usage: Applying to high-altitude area, cold area, humid area, salt mist area and seriously polluted area.
Small size: Smallish cold-shrink terminations can minimize stripping distance effectively.

Technical Properties

Property	Typical data
Property	15kV(8.7/15kV)	24kV ( 12/20kV)	30kV (18/30kV)	36kV (26/35kV)
AC withstand(under rain)	35KV/1min	48KV/1min	72KV/1min	104KV/1min
AC withstand(without rain)	39KV/1min	54KV/1min	81KV/1min	117KV/1min
Impulse withstand	±95KV/10times	±125KV/10times	±170KV/10times	±200KV/10times
DC withstand	35KV/15min	48KV/15min	72KV/15min	104KV/15min
AC withstand	35KV/4h	48KV/4h	72KV/4h	104KV/4h
Partial discharge test	10Pc(1.73Uo)	10Pc(1.73Uo)	10Pc(1.73Uo)	10Pc(1.73Uo)

Selective Chart

Product	Specification		Size of Conductor
	15kV(8.7/15kV)	24kV (12/20kV)		(mm2)
3-cores indoor termination kit	CT-15-LN-3/1	CT-24-LN-3/1		25-50
	CT-15-LN-3/2	CT-24-LN-3/2		70-120
	CT-15-LN-3/3	CT-24-LN-3/3		150-240
	CT-15-LN-3/4	CT-24-LN-3/4		300-400
	CT-15-LN-3/5	CT-24-LN-3/5		500-800
3-cores outdoor termination kit	CT-15-LW-3/1	CT-24-LW-3/1		25-50
	CT-15-LW-3/2	CT-24-LW-3/2		70-120
	CT-15-LW-3/3	CT-24-LW-3/3		150-240
	CT-15-LW-3/4	CT-24-LW-3/4		300-400
	CT-15-LW-3/5	CT-24-LW-3/5		500-800
3-cores straight through joint	CT-15-LJ-3/1	CT-24-LJ-3/1		25-50
	CT-15-LJ-3/2	CT-24-LJ-3/2		70-120
	CT-15-LJ-3/3	CT-24-LJ-3/3		150-240
	CT-15-LJ-3/4	CT-24-LJ-3/4		300-400
	CT-15-LJ-3/5	CT-24-LJ-3/5		500-800
Single core indoor termination kit	CT-15-LN-1/1	CT-24-LN-1/1		25-50
	CT-15-LN-1/2	CT-24-LN-1/2		70-120
	CT-15-LN-1/3	CT-24-LN-1/3		150-240
	CT-15-LN-1/4	CT-24-LN-1/4		300-400
	CT-15-LN-1/5	CT-24-LN-1/5		500-800
Single core outdoor termination kit	CT-15-LW-1/1	CT-24-LW-1/1		25-50
	CT-15-LW-1/2	CT-24-LW-1/2		70-120
	CT-15-LW-1/3	CT-24-LW-1/3		150-240
	CT-15-LW-1/4	CT-24-LW-1/4		300-400
	CT-15-LW-1/5	CT-24-LW-1/5		500-800
Single core straight through joint	CT-15-LJ-1/1	CT-24-LJ-1/1		25-50
	CT-15-LJ-1/2	CT-24-LJ-1/2		70-120
	CT-15-LJ-1/3	CT-24-LJ-1/3		150-240
	CT-15-LJ-1/4	CT-24-LJ-1/4		300-400
	CT-15-LJ-1/5	CT-24-LJ-1/5		500-800

Product	Specification		Size of Conductor
Product	30kV(18/30kV)	35kV(26/35kV)	(mm2)
3-coresindoor termination kit	CT-30-LN-3/1	CT-35-LN-3/1	35-70
	CT-30-LN-3/2	CT-35-LN-3/2	95-185
	CT-30-LN-3/3	CT-35-LN-3/3	240-400
	CT-30-LN-3/4	CT-35-LN-3/4	500-800
3-coresoutdoor termination kit	CT-30-LW-3/1	CT-35-LW-3/1	35-70
	CT-30-LW-3/2	CT-35-LW-3/2	95-185
	CT-30-LW-3/3	CT-35-LW-3/3	240-400
	CT-30-LW-3/4	CT-35-LW-3/4	500-800
3-coresstraight through joint	CT-30-LJ-3/1	CT-35-LJ-3/1	35-70
	CT-30-LJ-3/2	CT-35-LJ-3/2	95-185
	CT-30-LJ-3/3	CT-35-LJ-3/3	240-400
	CT-30-LJ-3/4	CT-35-LJ-3/4	500-800
Single coreindoor termination kit	CT-30-LN-1/1	CT-35-LN-1/1	35-70
	CT-30-LN-1/2	CT-35-LN-1/2	95-185
	CT-30-LN-1/3	CT-35-LN-1/3	240-400
	CT-30-LN-1/4	CT-35-LN-1/4	500-800
Single coreoutdoor termination kit	CT-30-LW-1/1	CT-35-LW-1/1	35-70
	CT-30-LW-1/2	CT-35-LW-1/2	95-185
	CT-30-LW-1/3	CT-35-LW-1/3	240-400
	CT-30-LW-1/4	CT-35-LW-1/4	500-800
Single corestraight through joint	CT-30-LJ-1/1	CT-35-LJ-1/1	35-70
	CT-30-LJ-1/2	CT-35-LJ-1/2	95-185
	CT-30-LJ-1/3	CT-35-LJ-1/3	240-400
	CT-30-LJ-1/4	CT-35-LJ-1/4	500-800

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Cold Shrink Cable Accessories 10-36KV

Tags :

Related products

Cold Shrink Cable Accessories 1KV

Cotran cold shrink terminations and joints are composed of a series of pre-expanded silicone tubes and necessary accessories. The core is removed after the tube is positioned for installation over an inline connection, or terminal lug, allowing the tube to shrink and provide a excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC, Single-core and multi-core cable rated to 0.6/1kV.

Cold Shrink 3 cores cable Breakout (1~36kV)

Applications：

Used to provide insulation protection for cable termination and straight joint.

Electric Vehicles Battery Pack Water Cold Plate

◆Excellent surface flatness

◆Large thermal transfer area

◆Flexible flow channel design

◆Easy processing and shaping

◆Good thermal dissipation effect

◆Low leakage risk and high safety

◆Good pressure resist and strength

◆High production efficiency and yield

PIB Self-Fusing Electrical Tape KC74

KC74 self amalgamating tape for insulating and moisture sealing of telecommunication cable connections For insulation and moisture sealing in splices and terminations of solid dielectric power cable up to 10kVFor general-purpose protection and waterproofingFor corrosion protection of metal pipework.

Color Coding Electrical PVC Tape KC61

◆ High tensile strength.

◆ High elongation.

◆ Good insulation property.

◆ Excellent electrical properties.

◆ Good shape retention.

◆ Operation and installation easily.

◆ RoHS 2011/65/EU(2015/863/EU)compliant.

Heat Shrinkable Busbar Insulation Tube

Designed for insulation of copper and aluminum busbars- for electrical substations and switchgear cabinets. Can be used for exterior installations

Shrink ratio: 2.5:1

Operating voltage: 35 kV

Material: polyolefin, halogen-free «HF»

Analogs: BPTM (Raychem); BBI (3M)

Resistant to the phenomenon of tracking and UV radiation

High dielectric strength

Color: brick red

The use of tubes ТТШ allows shortening the distance between phase busbars and significantly reducing the dimensions of the device

Protects electrical busbars against chemical corrosion

Protects equipment from short circuits in case of contact of electrical devices with animals and birds

64/110KV YJZGG Prefabricated Insulating Joint/ Straight Through Joint For 64/110kv Xlpe Cable

1. The body of joint is made of imported silicone rubber with good quality, so it is with high strength, elasticity and tear resistance as well as excellent thermal

aging resistance.

2. The body of joint has integral pre-fabricate structure with high voltage shielded, stress cone and insulating injection pressed integration, so it has excellent properties and easy to test as well as install.

3. The body of joint is analized and computed optimization by finite element software, so it has more resonable field-intensity distribution and high insulation safety margin.

4. The body of insulating joint and straight through joint is the same, the d ifference is just the handling of shielding on-site installation, insulating joint with one side insulated and the rest shielded while staight through joint full shielded.

5. The joint has completely sealed structure with high mechanical strength and good sealing performance.

6. Joint protecting is made of insulating copper case with high-intensitive T2 copper, and the moulded high-density PE material of its external surface is used for insulation and anti-corrosion with good mechanical protection and permanent waterproof sealing performance, which ensure the joint to run safely and reliably in the long-term under harsh environment.In addition, it can equip glass fiber reinforced plastic protective box as a strengthen waterproof measure accordingly.

7. Special installer tools make the installation more convenient.