Super Thin Waterproof Waterseal Mastic Tape T28

◆ Continuous waterproofing;
◆ Ultra-thin;
◆ Good tensile strength;
◆ Highly self-fusing tape;
◆ Suitable for irregular shapes cable;
◆ Resistance to high/low temperature;
◆ Resistance to corrosion;
◆ Resistance to ozone, UV, xenon exposure;

Inquiry now

product introduction

Cotran Brand T28-thin waterseal mastic tape is a new generation made from EPR and butyl rubber. T28-thin is produced according To a new improved formula of COTRAN, which is a fusion of all advice from the base station staff. It inherits all the KC80 good features, and also has the new characteristics of being light&thin and easy to be operated.

Applications

◆ Use for insulating, filling and moisture sealing in splices of all types of power cables and optical telecommunication cables;
◆ Use for insulation and moisture sealing irregular shaped bus bar bolted connections;
◆ Use for moisture sealing high or low voltage junction boxes and irregular splices;
◆ Moisture seal for power cable and wire connections;
◆ Moisture seal for service drops;
◆ Moisture seal for ground wire and rod connections;

Test Parameters

No.	Test Item	Result	Test Method
1	Dimension	45mmx1mmx10m	ASTM D4325
2	Tensile Strength	0.74MPa	ASTM D4325
3	Elongation at Break	906%	ASTM D4325
4	DielectricStrength	20kV/mm	ASTM D1000
5	Adhesion (180° Steel plate)	29.6N/50mm	ASTM D1000
6	Ozone Resistance	Pass	ASTM D4388
7	UV Resistance	Pass	ASTM D4388
8	Xenon-arc Exposure	Pass	ASTM D4388

Installation

Cotran Brand T28-thin waterseal mastic tape should be applied in half–lapped layers until desired insulation build up is reached.

Step 1 Wipe off the dusts on the splice area before wrapping.

Step 2 Remove the liner and stretch the tape to 1 to 2 times of its original length, apply the tape in 50%-lapped with mastic side toward area to the wrapped. Stretching the tape to 4 times of its original length is not recommended.

Step 3 Make sure there is 30mm to 50mm wrapping tape above both sides of the splice area.

Step 4 After T28-thin waterseal mastic tape is applied, overwrapping COTRAN PVC insulation tape is recommended, apply 3 layers of COTRAN PVC insulation tape in a 50% overlapping with no tension. Make sure not to overstretch the PVC tape during installation.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Super Thin Waterproof Waterseal Mastic Tape T28

Tags :

Related products

Water Seal Mastic Self Adhesive Tape KC86

◆ Continuous waterproofing.

◆ Highly self-fusing tape.

◆ Suitable for irregular shapes cable.

◆ Resistance to high/low temperature.

◆ Resistance to corrosion.

◆ Resistance to ozone, UV, xenon exposure.

◆ New formulation for insulation.

◆ Operation and installation easily.

◆ Excellent adhesion to copper, aluminum and cable jacket.

Waterproof Insulation Waterseal Mastic Tape KC80

◆ Continuous waterproofing.
◆ Highly self-fusing tape.
◆ Suitable for irregular shapes cable.
◆ Resistance to high/low temperature.
◆ Resistance to corrosion.
◆ Resistance to ozone, UV, xenon exposure.
◆ New formulation for insulation.
◆ Operation and installation easily.
◆ Excellent adhesion to copper, aluminum and cable jacket.

COTRAN 930 Waterproof Insulation Tape

COTRAN 930 is made of fully vulcanized rubber as the base material, supplemented by one tacky mastic layers of waterproof. It can meet the wear-resistant, waterproof and needs of sheath repair for all types of cables. COTRAN 930 is used in heat shrink and cold shrink field to provide good waterproof, insulation and sealing as the cable joints accessories.

4310 Straight Female Connector for 1-5/8 Flexible RF Cable

Material and Plating Inner Conductor Pin Brass / Silver Plating Inner Conductor Socket Tin Bronze / Silver Plating Insulator TPX Body & Outer Conductor Brass / Trimetal Plating Gasket Silicon Rubber Electrical Specifications Characteristics Impedance 50 Ohm Frequency Range DC~2.7GHz Insulation Resistance ≥5000MΩ Dielectric Withstanding Voltage 2500V rms Operating Voltage 1400V rms Center contact resistance ≤1.5 mΩ Outer contact resistance ≤1.5mΩ Insertion Loss @DC-2.7 GHz ≤0.10dB VSWR @0.8-1.0 GHz ≤1.08 @1.7-2.7 GHz ≤1.13 PIM3(2*43dBm) ≤-155dBc Environmental & Mechanical Specifications Durability (matings) ≥500 cycles Mechanical Shock Test Method MIL-STD-202, Method 213, Test Condition D Vibration Test Method MIL-STD-202, Meth. 204, Cond. A Temperature Range -65°C to +85°C RoHS Compliant Sealing Class IP68 24hr, 1m, 20℃ Regulatory Compliance / Certification ISO 9001:2015 Compliant The facts and figures contained herein are carefully complied to the best of our knowledge, but they are intended for general informational purposes only.

COTRAN ECap Cold Shrink Rubber EPDM End Cap

CSEC Cold shrink rubber end caps are usually used for environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. Cold shrink EPDM end caps are close-ended, tubular rubber tube that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage, like moisture, contamination and corrosion etc.

4.3-10 Straight Female Connector for 7/8" Flexible RF Cable

Material and Plating Inner Conductor Pin Tin Bronze / Silver Plating Inner Conductor Socket Tin Bronze / Silver Plating Insulator TPX Body Brass / Trimetal Plating Gasket Silicon Rubber Electrical Specifications Characteristics Impedance 50 Ohm Frequency Range DC~6GHz Insulation Resistance ≥10000MΩ Dielectric Withstanding Voltage 2500V rms Operating Voltage 1400V rms Center contact resistance ≤1.5 mΩ Outer contact resistance ≤1.5mΩ Insertion Loss @DC-2.7 GHz ≤0.10dB VSWR @0.8-1.0 GHz ≤1.08 @1.7-2.7 GHz ≤1.10 PIM3(2*43dBm) ≤-160dBc Environmental & Mechanical Specifications Durability (matings) ≥500 cycles Mechanical Shock Test Method MIL-STD-202, Method 213, Test Condition D Vibration Test Method MIL-STD-202, Meth. 204, Cond. A Temperature Range -65°C to +85°C RoHS Compliant Sealing Class IP68 24hr, 1m, 20℃ Regulatory Compliance / Certification ISO 9001:2015 Compliant The facts and figures contained herein are carefully complied to the best of our knowledge, but they are intended for general informational purposes only.

Flexible Black Nylon Self-Locking Cable Ties

Each wire ties own an eye hole in the tail allowing the tie to be attached to a cable or hung from a hook. It is much better than plastic cord organizer ties and you do not need to trim it.