Stress Release Mastic Tape KC100

Applications：

Used to provide insulation protection for cable termination and straight joint.

COTRAN HHWT co-extruded heavy wall heat shrinkable tubing with hot melting adhesive is made from radiation crosslinked polyolefin. Specifically designed formulation makes the tubing to have outstanding physical, chemical and electrical properties, and also meet the requirement of RoHS and other environment concerned standards. It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.

Applications：

The tubing manufactured with special technology, is very suitable for applications in power cable joints up to 36kV.

Designed for insulation of copper and aluminum busbars- for electrical substations and switchgear cabinets. Can be used for exterior installations

Shrink ratio: 2.5:1

Operating voltage: 35 kV

Material: polyolefin, halogen-free «HF»

Analogs: BPTM (Raychem); BBI (3M)

Resistant to the phenomenon of tracking and UV radiation

High dielectric strength

Color: brick red

The use of tubes ТТШ allows shortening the distance between phase busbars and significantly reducing the dimensions of the device

Protects electrical busbars against chemical corrosion

Protects equipment from short circuits in case of contact of electrical devices with animals and birds

◆High production efficiency

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high reliability

Product Introduction

Made from radiation cross-linked polyolefin. The dual layer structure of insulation/hot melt adhesive effectively provides electric insulation and shock protection to busbar up to 24KV. Widely used to protect irregular shape busbar or connectors where tube products can not be applied.

KC80-S cable insulation sealing protective pad is a self-adhesive sheet made of EPR rubber and butyl mastic, which has excellent weather resistance, wear resistance, insulation, waterproof and other properties. It is mainly used for the repair of cable outer sheath, the coating of power fittings, insulation protection and other scenarios. It provides excellent waterproofing performance and temperature stability. Operating temperature rated to 90°C. Emergency overload rating to 130°C.

◆High production efficiency

◆Large thermal transfer area

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high reliability

◆Good tightness and high strength