Electrical Insulation Silicone Rubber Tape

Heat Resistant Silicone Rubber Electrical Tape KC73

◆ Highly tracking resistance
◆ Resistance to solvents
◆ Withstand high/low temperature
◆ Resistance to ozone, UV, and xenon exposure

Inquiry now

product introduction

KC73(770) is arc-resistant anti-tracking, self-fusing silicone rubber tape with wide temperature tolerance of -50°C to 250°C. It has excellent electrical and physical properties in anti-tracking, arc resistance, and weather resistance, which can be applied through 15kV for insulation and sealing for cable and reenter connections. It also provides superior surface anti-tracking performance.

Technical Data

Property	Typical Value	Test Method
Tensile strength	6.76Mpa	ASTM D 4325
Elongation at break	480%	ASTM D 4325
Heat ageing (250°C 168H)	Pass	ASTM D 4325
Ozone ageing	Pass	ASTM D 1373
UV ageing	Pass	ASTM D 1373
Xenon ageing	Pass	ISO 4892-2

Packing

Part No.	Dimension	Color	Rolls/Case
KC73(770)	19mm0.3mm15m	Grey	50
KC73(770)	19mm0.5mm15m	Grey	50
KC73(770)	25mm0.3mm15m	Grey	50
KC73(770)	25mm0.5mm15m	Grey	50

Note: Other size is available on request.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Heat Resistant Silicone Rubber Electrical Tape KC73

Tags :

Related products

COTRAN Z551 Self-Fusing Silicon Rubber Tape

COTRAN Z551 self-fusing silicon rubber tape is composed of self-fusing silicone rubber and easily removed liner. It has excellent resistance to tracking, ozone, UV, corrosion, water and continuous operating temperature of -50℃～180℃. It can be used in dirty areas. Suitable for busbar insulation protection and phase identification, Insulation for terminations and joints of high-voltage power cables up to 35kV, Insulation for submarine cables, submersible motors, large-sized generators, automobiles, aero engines and other electrical equipment.

64/110KV YJZGG Dry Insulated Gis Termination For 64/110kv Xlpe Cable

Dry GIS termination has composite structure of stress cone and epoxy sheath, making the surface of pre-fabricated stress cone clinged to the inner wall of epoxy sheath through spring assembly to reach reasonable interface pressure.

Primer for Anti-Corrosion Tape

The anticorrosive primer and PE anticorrosive tape together constitute the polyethylene cold wound anticorrosive system. Coated on the surface treatment of steel tube, can fill a small bump on the surface of the steel tube, and can increase the adhesive tape with sticky relay between steel tube, at the same time it is also a kind of excellent corrosion inhibitor.