Electrical Insulation Silicone Rubber Tape

Heat Resistant Silicone Rubber Electrical Tape KC73

◆ Highly tracking resistance
◆ Resistance to solvents
◆ Withstand high/low temperature
◆ Resistance to ozone, UV, and xenon exposure

Inquiry now

product introduction

KC73(770) is arc-resistant anti-tracking, self-fusing silicone rubber tape with wide temperature tolerance of -50°C to 250°C. It has excellent electrical and physical properties in anti-tracking, arc resistance, and weather resistance, which can be applied through 15kV for insulation and sealing for cable and reenter connections. It also provides superior surface anti-tracking performance.

Technical Data

Property	Typical Value	Test Method
Tensile strength	6.76Mpa	ASTM D 4325
Elongation at break	480%	ASTM D 4325
Heat ageing (250°C 168H)	Pass	ASTM D 4325
Ozone ageing	Pass	ASTM D 1373
UV ageing	Pass	ASTM D 1373
Xenon ageing	Pass	ISO 4892-2

Packing

Part No.	Dimension	Color	Rolls/Case
KC73(770)	19mm0.3mm15m	Grey	50
KC73(770)	19mm0.5mm15m	Grey	50
KC73(770)	25mm0.3mm15m	Grey	50
KC73(770)	25mm0.5mm15m	Grey	50

Note: Other size is available on request.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Heat Resistant Silicone Rubber Electrical Tape KC73

Tags :

Related products

COTRAN Z551 Self-Fusing Silicon Rubber Tape

COTRAN Z551 self-fusing silicon rubber tape is composed of self-fusing silicone rubber and easily removed liner. It has excellent resistance to tracking, ozone, UV, corrosion, water and continuous operating temperature of -50℃～180℃. It can be used in dirty areas. Suitable for busbar insulation protection and phase identification, Insulation for terminations and joints of high-voltage power cables up to 35kV, Insulation for submarine cables, submersible motors, large-sized generators, automobiles, aero engines and other electrical equipment.

Energy Storage Roll Bonded Liquid Cooling Plate

◆High production efficiency

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk andhigh reliability

New Energy Vehicle Cylindrical Battery Water Cooling Tube

◆Large thermal dissipation area

◆High thermal dissipation efficiency

◆Low leakage risk and high reliability

◆Stable and high production efficiency

◆Reduce the weight of the battery pack

◆Low energy for single cylindrical battery

◆Improve the battery life and performance

◆Less pollution and environmental protection

Energy Storage System Aluminum Roll Bonded Heat Sink Plate

◆High processing efficiency

◆Good welding performance

◆Large thermal transfer area

◆High tightness and strength

◆Flexible flow channel design

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Good thermal exchange effect

KC96 EPDM Cold Shrink Tube

◆ High elastic EPDM rubber tube structure.
◆ Good puncture resistant, abrasion resistance, acid and alkali resistance.
◆ 20 years long lifetime during operation.
◆ Easy to install, only two steps (Cover, pull).
◆ Fast installation, only 15-30 seconds needed to seal one connection.
◆ No limitation of spare space, especially design for narrow space.
◆ Easy to uninstall, only need knife to cut tube open.
◆ No skill required by engineers, uniform quality after installation, stable and good sealing and
◆ Weatherproofing performance.
◆ Much time and labor cost saving.
◆ Good operating capability under hash environmental condition, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone.

Heat Shrink 3 Cores Breakout (1~36kV)

Applications：

Used to provide insulation protection for cable termination and straight joint.

Foam Sealing Material KC5000

KC5000 foam sealing material is made of A and B material after proper proportion of mixing, chemical reaction and form foaming body. Before it becomes a foaming body, the product is in liquid form and has good fluidity. It can be extremely well applied to fire proof and moisture-proof plugging at the bottom of various electrical and communication panels and cabinets, fire proof and moisture-proof plugging at the opening of complex perforating pipe fittings, etc. The foam sealing material by fire, heat and other high temperature will produce expanded carbon layer, can effectively prevent the spread of fire combustion and heat transfer, so it can provide good protection for non-fire surface, according to GB 23864-2009 standard requirements, with a 1.5h fire aging. In addition, the product in the harsh, dirty environment, still can maintain the normal fire and moisture-proof function.