product introduction

KC100 is a highly conformable, flexible, self-fusing a stress relieving, nitrile-butadiene rubber (NBR) based mastic tape. It is designed to control electric stress by reshaping the electrical field and build up a voltage gradient across the adjacent cable for cable joints and terminations through 36KV.

Technical Data

Property	Typical Value	Test Method
Volume Resistivity	10^10~10^34 Ω.mm	GB/T 1692-2008
Elongation at break	500%	GB/T 528-2009
Dielectric Strength	31.93KV/mm	GB/T 1695-2005
Dielectric Constant	15~18	GB/T 1693-2007

Packing

Part No.	Dimension	Color	Rolls/Case
KC100	30mm2mm360m	Yellow	500

Note: Other size is available on request.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Stress Release Mastic Tape KC100

Tags :

Related products

Roll Bonded Cooling Plate for Battery Energy Storage System

◆High production efficiency

◆Good heat exchange effect

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Low leak risk and high security

Heat-absorbing and Fireproof Blanket KC9000

KC9000 heat-absorbing and fireproof blanket is a fireproof product that can be directly coated on the external protection of equipment, power cable, cable bridge, etc., which can effectively prevent flame spread and reduce the serious damage caused by high temperature conduction.

KC87 Waterproof Insulation Tape

Brazed Water Cold Sheet for Battery Energy Storage

◆High production efficiency

◆Lower energy consumption

◆Large thermal transfer area

◆Rapid thermal cooling speed

◆Perfect thermal performance

◆Thin thickness to save space

◆Easy processing and shaping

◆Low leak risk and high security

Shear bolt Connector&Lug

The shear bolt connectors are intended for stranded and solid aluminum and copper cable, low voltage and medium voltage up to 36 kV.

They comprise cable areas 10-400 mm² even bigger for sector cable. There is also a screw sleeve for branches up to a total of 100 mm². The joint with the conductor is achieved by the screws in the connector or terminal being tightened to a predetermined torque.

COTRAN 932 Wear-Resistant Insulating Repair Tape

COTRAN 932 is made of special chlorosulfonated polyethylene rubber as the base material, supplemented by two tacky mastic layers of flame retardant and waterproof. It can meet the wear-resistant, waterproof and fire-resistant needs of sheath repair for all types of cables. COTRAN 932 is used to repair of mining cables, outer jacket of mining cable splice kits and splicing of mine conduit.