EPR Electrical Semi-conducting Tape KC72

◆ Can be used to repair XLPE cable terminations and joints or shielding for other devices up to 110kV.

◆ Retains its conductivity when stretched.

◆ Semi-conducting (low resistivity).

◆ Suitable for irregular shapes cable with good elongation.

◆ Withstand high temperatures (130°C/266°F) short-term overload.

◆ Compatible with all solid dielectric cable insulations and conductors.

◆ Resistance to ozone, solvents, UV, xenon exposure and moisture.

◆ Suitable for indoor or outdoor applications.

◆ Operation and installation easily.

◆ Increases its conductance and will not harm it in any way.

Inquiry now

product introduction

Product Description

Cotran Brand KC72 electrical semi-conducting tape is a Highly conformable, self-fusing, semi-conducting ethylene

propylene rubber(EPR) based, high voltage splicing tape. KC72 is used for repairing of XLPE cable terminations

and joints or shielding for other devices up to 110kV.

Applications

◆ Uniform electric field in high electric field, to minimize electrical stresses in

◆ Continue semi-conducting strand shielding found in solid dielectric cables above 5kV.

◆ Provide shielding layer for solid dielectric insulated cable.

◆ Repair the semi-conducting layer beneath metallic shield of similar cables in case of damage

◆ Make conductive portion of stress cone of power cable termination on solid dielectric insulated cables.

Test Parameters

No.	Test Item	Result	Test Method
1	Color	Black
2	Thickness	0.76mm	ASTM D4325
3	Tensile Strength	＞1.73MPa	ASTM D4325
4	Elongation at Break	＞935%	ASTM D4325
5	Water absorption	0.19%	ASTM D570-98
6	Volume resistivity	＜7x10⁶Ώ.cm	ASTM-D4325
7	Heat ageing(130℃ 168H)	Pass	ASTM D4325
8	UV ageing	Pass	ASTM D4325
9	Xenon ageing	Pass	ISO 4892-2

Installation

Cotran Brand KC72 electrical semi-conducting tape is usually wrapped in half-lapped layers. With excellent elongation, stretched overwrapping the connectors, terminals, and metallic shield of power cable.

Step 1 Wipe off the dusts on the power cable area before wrapping.

Step 2 Remove the liner and stretch the tape to 1 to 2 times of its original length, apply the tape in 50%-lapped toward area to the wrapped. Stretching the tape to 4 times of its original length is not recommended.

Step 3 Overwrapping the electrical semi-conducting tape on the power cable on the needed area.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : EPR Electrical Semi-conducting Tape KC72

Tags :

Related products

EPR High Voltage Insulation Tape KC71

◆ Can be used to splice and terminate cable, the emergency overload temperatures can reach 130℃.

◆ Based on Ethylene Propylene Rubber(EPR).

◆ Physical and electrical properties are unaffected by the degree of stretch.

◆ Self-fusing tape.

◆ Excellent electrical properties.

◆ A special polyester liner which will not stick to the tape upon unwind.

◆ Operation and installation easily.

◆ Compatible with all solid dielectric cable insulation:

Polyethylene (high and low density).

Cross-linked polyethylene (XLPE).

Polyvinyl chloride (PVC).

Butyl rubber.

64/110KV YJZGG Prefabricated Insulating Joint/ Straight Through Joint For 64/110kv Xlpe Cable

1. The body of joint is made of imported silicone rubber with good quality, so it is with high strength, elasticity and tear resistance as well as excellent thermal

aging resistance.

2. The body of joint has integral pre-fabricate structure with high voltage shielded, stress cone and insulating injection pressed integration, so it has excellent properties and easy to test as well as install.

3. The body of joint is analized and computed optimization by finite element software, so it has more resonable field-intensity distribution and high insulation safety margin.

4. The body of insulating joint and straight through joint is the same, the d ifference is just the handling of shielding on-site installation, insulating joint with one side insulated and the rest shielded while staight through joint full shielded.

5. The joint has completely sealed structure with high mechanical strength and good sealing performance.

6. Joint protecting is made of insulating copper case with high-intensitive T2 copper, and the moulded high-density PE material of its external surface is used for insulation and anti-corrosion with good mechanical protection and permanent waterproof sealing performance, which ensure the joint to run safely and reliably in the long-term under harsh environment.In addition, it can equip glass fiber reinforced plastic protective box as a strengthen waterproof measure accordingly.

7. Special installer tools make the installation more convenient.

64/110kv YJZWFY Outdoor Termination with Composite Insulator For 64/110kv Xlpe Cable

Composite sheath has many advantages compared with traditional porcelain sheath, so it is the best substitute and has been accepted gradually all over the world.

Energy Storage Square Battery Water Cooling Sheet

◆High production efficiency

◆Good heat exchange effect

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Low leak risk and high security

Energy Storage System Battery Water Cold Plate

◆High production efficiency

◆Good heat exchange effect

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Low leak risk and highsecurity

New Energy Vehicle Brazed Liquid Cooling Plate

◆Good surface flatness

◆Large thermal transfer area
◆Flexible flow channel design
◆Thin thickness to save space
◆Perfect thermal dissipation effect
◆Low leakage risk and high reliability
◆Stable and high production efficiency
◆Good pressure resistance and strength

Insulating Busbar Cover Protection up to 11 KV, 24KV, 36KV

Product Introduction

Made from specially formulated radiation cross-linked compounds. It can provide high resistance to tracking and arcing. Used to enhance the insulation properties of busbar in switch and substation to safe protect up to safe protect up to 11 kv, 24kv, 36kv.