KC80-S Cable Insulation Sealing Protective Pad

KC80-S cable insulation sealing protective pad is a self-adhesive sheet made of EPR rubber and butyl mastic, which has excellent weather resistance, wear resistance, insulation, waterproof and other properties. It is mainly used for the repair of cable outer sheath, the coating of power fittings, insulation protection and other scenarios. It provides excellent waterproofing performance and temperature stability. Operating temperature rated to 90°C. Emergency overload rating to 130°C.

Inquiry now

product introduction

Product Features

Insulation protection , wear resistance and waterproof sealing
Weathering and corrosion resistance
Self-adhesive to form a reliable seal for long-term operation
Ozone resistant
UV resistant
Operating temperature: -20-40℃

Technical Properties

Property	Typical value	Test method
Thickness	Thickness：4.30mm EPR: 1.30mm; Mastic: 3.00mm	ASTM D 1000
Tensile strength	0.58MPa	ASTM D 412
Elongation at break	900%	ASTM D 412
Thermal aging test (110 ℃/168h)	Pass	IEC 60811
Tracking and erosion resistance	2.75kV, ≥1h，pass	IEC 60587 Test Method 2 Standard A
AC withstand voltage test	35kV, 60s，No breakdown	IEC 60060-1
AC withstand voltage test	25kV, 5min，No breakdown	IEC 60060-1
Volumetric resistivity	5.9×10¹⁵Ω.cm	IEC 60250
UV resistance	Pass	ASTM G 53
Heat Exposure (130°C, 1h)	Pass	ASTM D 4388

Specification

400mm x210mm, 140mm x210mm

*Other sizes and packing are available on requested.

Shelf life and Storage

KC80-S cable insulation sealing protective pad has 3 year's shelf life from date of manufacture when stored in a humidity controlled storage (0 °C to 30 °C and <75% relative humidity).

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : KC80-S Cable Insulation Sealing Protective Pad

Tags :

Related products

Self-adhesive Water Proofing Butyl Tape KC101

◆ High adhesion

◆ Weather resistance

◆ High flexibility

◆ High elongation at break

KC87 Waterproof Insulation Tape

Silicone rubber cold shrink tube En-CST

◆IPX8 class, stable and long-life during operation

◆Easy to install, only two steps (Cover, pull)

◆Fast installation, only 15-30 seconds needed to seal one connection

◆No limitation of spare space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,

◆Easy to uninstall, only need knife to cut tube open

◆No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance

◆Much time cost, and labor cost saving

◆Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone

Aluminum Electric Automobile Battery Liquid Cooling Plate

◆Good surface smoothness

◆Large thermal transfer area

◆Optional flow channel design

◆Easy processing and shaping

◆Excellent thermal cooling effect

◆Low leakage risk and high reliability

◆Stable and high production efficiency

◆Good pressure resistance and strength

Anticorrosive Coating for Towers

Anticorrosive coating for towers is a two-component, thick-type, one-side polyurethane acrylic coating with excellent weather resistance and long recoating performance. This product has both anti-corrosion, weather resistance in one, with excellent wear resistance, impact resistance, color retention and aging resistance.