Heat Shrinkable Busbar Insulation Tube

Designed for insulation of copper and aluminum busbars- for electrical substations and switchgear cabinets. Can be used for exterior installations

Shrink ratio: 2.5:1

Operating voltage: 35 kV

Material: polyolefin, halogen-free «HF»

Analogs: BPTM (Raychem); BBI (3M)

Resistant to the phenomenon of tracking and UV radiation

High dielectric strength

Color: brick red

The use of tubes ТТШ allows shortening the distance between phase busbars and significantly reducing the dimensions of the device

Protects electrical busbars against chemical corrosion

Protects equipment from short circuits in case of contact of electrical devices with animals and birds

Inquiry now

product introduction

Heat shirnkable busbar insulation tube is mainly used for bus bar insulation and protection, effective prevention of personal casualty, prevent the corrosion of salt mist and harmful chemical gas on the busbar accidents.

Our Busbar Insulation Tubing is a thick-wall heat-shrinkable tubing for copper and aluminum busbars, providing insulation enhancement and protection against flashover and accidentally induced discharge up to 35 kV.

CMBT

Medium Wall Halogen Free Busbar Insulation Tube for Medium

voltage (10kV-24KV)

CMBT medium wall halogen free bus bar insulation tube is made

from radiation cross-linked halogen free polyethylene. The bus bar

tube shows excellent electrical, shrinking and anti-tracking

properties. CMBT meets the latest RoHS and REACH

requirements.

Electrical Busbar Insulation Tube

CLBT

Halogen Free Busbar Insulation Heat Shrinkable Tube for Low voltage (1kV)

CLBT medium wall halogen free bus bar insulation tube is made from radiation cross-linked halogen free polyethylene. The bus bar tube shows excellent electrical,

shrinking and anti-tracking properties. CLBT meets the latest RoHS and REACH requirements.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Heat Shrinkable Busbar Insulation Tube

Tags :

Related products

Heat shrink cable accessories 10-36KV

Cotran heat shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48, IEEE-404, IEC60502. Our heat shrink terminations offers reliable and consistent performance for longer service life. We have designed our heat shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36KV.

Heat shrink cable accessories 1KV

Cotran heat shrink terminations and joints are composed of a series of pre-expanded adhesive lined heat shrink tubes and necessary accessories. Heat shrink and provide excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC/PILC, S/C, multi-core cable rated to 0.6/1kV.

Wraparound Repair Sleeve

Cotran wraparound repair sleeve (CWRS) is designed to repair damaged cable jackets and protect cable or pipes where needs corrosion protection on undamaged ones. CWRS is made from modified cross-linked polyolefin (XLPE) with a hot-melt adhesive. When heating, the sleeve shrinks and the adhesive melts, thereby achieving tightly bonding between the sleeve and the cable. It provides an excellent solution of protection against mechanical stress, harshest environments, moisture and corrosion.

CWRF is a fiber reinforced repair sleeve, which is composed of XLPE and fiber layer. It can provide better mechanical properties. CWRA is a fiber reinforced and aluminum layer reinforced repair sleeve, which is composed of XLPE, fiber layer, and aluminum layer. It can provide more stronger mechanical properties than CWRS and CWRF.

Heat Shrink Rain Shed (10~36kV)

Applications：

Used to provide insulation protection for cable outdoor termination in order to increase the creepage distance and avoid the formation of sewage for various of rod supporting insulators.

Heat Shrink 3 Cores Breakout (1~36kV)

Applications：

Used to provide insulation protection for cable termination and straight joint.

Heat Shrink Anti tracking Insulation Tube (1~36kV)

Applications：

Used to provide insulation protection for cable terminal, load-break switches, power circuit breakers, etc.

Heat Shrink Semi-Conductive/Insulation Double layer Tube (1~36kV)

Applications：

The tubing manufactured with special technology, is very suitable for applications in power cable joints up to 36kV.

Heat Shrink Stress Control Tube (11~24kV)

Applications：

The specially designed chemical formulation and carefully controlled manufacture technology effectively release the high electrical stress present at insulation screen in termination and joint of power cables from 11kV to 24kV.

Categories