Silicone Rubber Cold Shrink Tube With Mastic en-KC97

◆ High elastic silicone rubber tube structure with mastic built-in, dual layers design can bring double guarantee of weatherproofing protection；
◆ IPX8 class, stable and long-life during operation；
◆ Easy to install, only two steps (Cover, pull)；
◆ Fast installation, only 15-30 seconds needed to seal one connection；
Easy to uninstall, only need knife to cut tube open；
◆ No limits for installation space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,
◆ No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance；
◆ Much time cost, and labor cost saving；
◆ Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone；

Inquiry now

product introduction

en-KC97 is the upgrade solution of KC97 cold shrink tube with built-in mastic, which has been re-designed with special appearance on tube’s surface, much helpful to improve tube’s resistance to puncture and other external damage. It has the same performance as KC97 cold shrink tube for weatherproofing protection on cable connections or joints applied on cell sites, such as connection between jumper cable and connector (7/16 DIN, N type or 4.3-10 connector) on RF equipment (RRU, Antenna and passive device), and joint between feeder and jumper cable. Comparing with tape sealing protection, time of installation is much shorter (15-30 seconds), more convenient, uniform waterproofing quality.

Silicone cold shrink tubes

Applications

1. Widely used in communication base station coaxial cable, N type joints and 1/2 jumper, Din connector and 1/2 jumper connector waterproof sealing
2. Waterproof and moistureproof TV cable joint sealing
3. The insulating sealing connecting wire and cable
4. The insulating sealing protection of other types of connections

Property

Item		Parameter and Result	Test Method
Waterproof	Class	Pass, IPX8	IEC 60529:1989+A1:1999+A2:2013； 1 meter depth in water, duration: 8 hours
Physical and mechanical properties	Shore Hardness	A/41/1	ASTM D2240-15
	Tensile Strength	9.42 MPa	ASTM D412-15a Method A
	Elongation	960%	ASTM D412-15a Method A
	Tear Strength	41.6 KN/m	ASTM D624-00(2012)
	Brittleness temperature by impact	Pass	ASTM D746-14
Flammability	Horizontal burning	HB	UL 94-2013 Rev.6-2016 Section 7
Temperature	Installation temperature	-40℃ - 60℃
	Operation temperature	-60℃ - 90℃
	Stock temperature	-60℃ - 90℃

Note：Not for specifications. Values are typical, not to be considered minimum or maximum.

Specification

Mode	I.D(mm)	Relaxed I.D(mm)	Relaxed Length(mm)	Description
en-KC97-40	≥38	≤13	≥140	Cold Shrink Tube, designed for 1/2" jumper to equipment, only applicable for 7/16 DIN or 4.3-10 connector
en-KC97-28	≥27	≤12	≥110	Cold Shrink Tube, designed for 1/2" jumper to equipment, only applicable for 4.3-10 or Type N connector
en-KC97-AISG	≥22	≤10	≥110	Cold Shrink Tube, applicable for AISGcable to RET

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Silicone Rubber Cold Shrink Tube With Mastic en-KC97

Tags :

Related products

Silicone rubber cold shrink tube En-CST

◆IPX8 class, stable and long-life during operation

◆Easy to install, only two steps (Cover, pull)

◆Fast installation, only 15-30 seconds needed to seal one connection

◆No limitation of spare space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,

◆Easy to uninstall, only need knife to cut tube open

◆No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance

◆Much time cost, and labor cost saving

◆Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone

Waterproof Silicone Rubber Cold Shrink Tube KC92

◆ IPX7 class, stable and long life during operation;
◆ Easy to install, only three steps (Cover, pull and clench);
◆ Fast installation, only 15-30 seconds needed to seal one connection;
◆ No limitation of spare space, especially design for narrow space, high density connectors mounted equipment such as scenario of 3G and 4G combination site, multi-band antenna), also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc;
◆ Easy to uninstall, only need knife to cut tube open;
◆ No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance;
◆ Much time cost, and labor cost saving;
◆ Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone;
◆ Widely deployed for telecom projects wherever in China domestic and oversea;

Silicone Cold Shrink Tube With Mastic KC97

◆ High elastic silicone rubber tube structure with mastic built-in, dual layers design can bring double guarantee of
◆ weatherproofing protection;
◆ IPX8 class, stable and long life during operation;
◆ Easy to install, only three steps (Cover, pull and clench);
◆ Fast installation, only 15-30 seconds needed to seal one connection
◆ No limitation of spare space, especially design for narrow space, high density connectors mounted equipment such as scenario of 3G and; 4G combination site, multi-band antenna), also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,
◆ Easy to uninstall, only need knife to cut tube open and no sticky mastic left;
◆ No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance;
◆ Much time cost, and labor cost saving;
◆ Perfect SWR performance approved by telecom operators;
◆ Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone;
◆ Widely deployed for telecom projects wherever in China domestic and oversea;

Customized silicone rubber cold shrink tube enRR-CST

◆IPX8 class, stable and long-life during operation

◆Easy to install, only two steps (Cover, pull)

◆Fast installation, only 15-30 seconds needed to seal one connection

◆No limitation of spare space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,

◆Easy to uninstall, only need knife to cut tube open

◆No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance

◆Much time cost, and labor cost saving

◆Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone

KC58 Epoxy Glass Fiber Electrical insulating Tape

KC58 epoxy glass fiber electrical insulating tape is a strip of insulating binding material of a certain width, impregnated with a high temperature heat curing epoxy resin by a unidirectional, continuous twist, alkali-free glass fiber yarn after treatment. This tape has good softness and viscosity, opened in a network structure, easy to roll back, no loose wire, no overlap. The product has high strength, impact resistance, high modulus, low elongation, no hysteresis and no eddy current loss and other excellent properties.