Super Thin Waterproof Waterseal Mastic Tape T28

◆ Continuous waterproofing;
◆ Ultra-thin;
◆ Good tensile strength;
◆ Highly self-fusing tape;
◆ Suitable for irregular shapes cable;
◆ Resistance to high/low temperature;
◆ Resistance to corrosion;
◆ Resistance to ozone, UV, xenon exposure;

Inquiry now

product introduction

Cotran Brand T28-thin waterseal mastic tape is a new generation made from EPR and butyl rubber. T28-thin is produced according To a new improved formula of COTRAN, which is a fusion of all advice from the base station staff. It inherits all the KC80 good features, and also has the new characteristics of being light&thin and easy to be operated.

Applications

◆ Use for insulating, filling and moisture sealing in splices of all types of power cables and optical telecommunication cables;
◆ Use for insulation and moisture sealing irregular shaped bus bar bolted connections;
◆ Use for moisture sealing high or low voltage junction boxes and irregular splices;
◆ Moisture seal for power cable and wire connections;
◆ Moisture seal for service drops;
◆ Moisture seal for ground wire and rod connections;

Test Parameters

No.	Test Item	Result	Test Method
1	Dimension	38mmx1mmx3m	ASTM D4325
2	Tensile Strength	0.74MPa	ASTM D4325
3	Elongation at Break	906%	ASTM D4325
4	DielectricStrength	20kV/mm	ASTM D1000
5	Adhesion (180° Steel plate)	29.6N/50mm	ASTM D1000
6	Ozone Resistance	Pass	ASTM D4388
7	UV Resistance	Pass	ASTM D4388
8	Xenon-arc Exposure	Pass	ASTM D4388

Installation

Cotran Brand T28-thin waterseal mastic tape should be applied in half–lapped layers until desired insulation build up is reached.

Step 1 Wipe off the dusts on the splice area before wrapping.

Step 2 Remove the liner and stretch the tape to 1 to 2 times of its original length, apply the tape in 50%-lapped with mastic side toward area to the wrapped. Stretching the tape to 4 times of its original length is not recommended.

Step 3 Make sure there is 30mm to 50mm wrapping tape above both sides of the splice area.

Step 4 After T28-thin waterseal mastic tape is applied, overwrapping COTRAN PVC insulation tape is recommended, apply 3 layers of COTRAN PVC insulation tape in a 50% overlapping with no tension. Make sure not to overstretch the PVC tape during installation.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Super Thin Waterproof Waterseal Mastic Tape T28

Tags :

Related products

Water Seal Mastic Self Adhesive Tape KC86

◆ Continuous waterproofing.

◆ Highly self-fusing tape.

◆ Suitable for irregular shapes cable.

◆ Resistance to high/low temperature.

◆ Resistance to corrosion.

◆ Resistance to ozone, UV, xenon exposure.

◆ New formulation for insulation.

◆ Operation and installation easily.

◆ Excellent adhesion to copper, aluminum and cable jacket.

Waterproof Insulation Waterseal Mastic Tape KC80

◆ Continuous waterproofing.
◆ Highly self-fusing tape.
◆ Suitable for irregular shapes cable.
◆ Resistance to high/low temperature.
◆ Resistance to corrosion.
◆ Resistance to ozone, UV, xenon exposure.
◆ New formulation for insulation.
◆ Operation and installation easily.
◆ Excellent adhesion to copper, aluminum and cable jacket.

COTRAN 930 Waterproof Insulation Tape

COTRAN 930 is made of fully vulcanized rubber as the base material, supplemented by one tacky mastic layers of waterproof. It can meet the wear-resistant, waterproof and needs of sheath repair for all types of cables. COTRAN 930 is used in heat shrink and cold shrink field to provide good waterproof, insulation and sealing as the cable joints accessories.

Fire Retardant Tape KC77

KC77 Fire Retardant Tape is a flexible tape with high expansion rate, fire prevention and heat insulation. It is mainly used for fireproof plugging of cracks around single or cluster cables, wind pipe, plastic pipe penetrations and metal penetrations. It has good water resistance, acid and alkali resistance, moisture and heat resistance, and freeze-thaw resistance. It is free of volatile organic matter, asbestos, fiber dust and other harmful substances, safety and environmental protection without pollution. It uses the combination of chemical expansion and physical expansion technology, rapid expansion in case of fire, with the rise of temperature formed with the strength of the carbonization layer tightly filled through the holes of the gap, block the spread of flame and smoke, with more than 3 hours of fire aging. At the same time, the product in the harsh, dirty and other outdoor environment, still can maintain the normal fire function.

Cu/Al cable lugs

Applications：

Cable lugs are suitable for the conjunction of wires, cables in the distribution equipment and the electrical equipment. DT series of copper connecting terminals with copper cable, DL series of aluminum connecting terminals with aluminum cable.

COTRAN FEP 200℃ Temperature Resistant FEP Heat Shrinkable Tubing

FEP heat shrinkable tubing is made of FEP with excellent 200℃ high-temperature performance, chemical resistance, high insulation and excellent mechanical properties. FEP has excellent abration resistance and excellent clarity. Designed to provide insulation and mechanical protection in severe chemical and thermal environments. Widely used in electronic, aerospace, military and communication fields.

COTRAN HMWT Medium Wall Heat Shrinkable Tube

COTRAN HMWT medium wall heat shrinkable tube is made from radiation crosslinked polyolefin. Specifically designed formulation makes the tubing to have outstanding physical, chemical and electrical properties, and also meet the requirement of RoHS and other environment concerned standards. It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.