Self-adhesive Water Proofing Butyl Tape KC101

◆ High adhesion

◆ Weather resistance

◆ High flexibility

◆ High elongation at break

Inquiry now

product introduction

KC101 is a highly conformable, flexible, self-fusing butyl-based, water-proofing mastic tape. It provides excellent resistance to varying weather, ageing. Excellent adhesion to metals, cable insulations and jacket makes this tape used in sealant for cable terminations and joints through 36KV.

Technical Data

Property	Typical Value	Test Method
VoVolume Resistivity	1~10^14 Ωcm	GB/T 1692-2008
Elongation at break	1000%	GB/T 528-2009
Dielectric Strength	15KV/mm	GB/T 1695-2005
Adhesion	1N/mm	GB/T 2790-1995

Packing

Part No.	Dimension	Color	Rolls/Case
KC101	30mm2mm360m	Red	500

Note:

Other Color: Red, Grey, Black, White

Other size is available on request.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Self-adhesive Water Proofing Butyl Tape KC101

Tags :

Related products

KC80-S Cable Insulation Sealing Protective Pad

KC80-S cable insulation sealing protective pad is a self-adhesive sheet made of EPR rubber and butyl mastic, which has excellent weather resistance, wear resistance, insulation, waterproof and other properties. It is mainly used for the repair of cable outer sheath, the coating of power fittings, insulation protection and other scenarios. It provides excellent waterproofing performance and temperature stability. Operating temperature rated to 90°C. Emergency overload rating to 130°C.

KC87 Waterproof Insulation Tape

COTRAN TMS 135 Military Grade Heat Shrinkable Identification Sleeves

Special designed to meet the requirements of high performance identification of wire and cable. It is made of superior flame retardant polyolefin with excellent electrical, physical, chemical and printing properties. Permanent printing property can be widely used for high-performance identification of wire and cables in industrial, military, aerospace, etc.

Splicing Connector Automatic Splice Full Tension Aluminum

Product Features
COTRAN automatic splice rated to hold a minimum 95% RBS of the Conductor used, can ensure quick and reliable overhead tension splice with fast and easy installation. The conductor simply slips into color-coded, funnel-shaped end piece and enters the pilot cap automatically with a simple push. The pilot cap guides the conductor to pass the set of serrated jaws and into the center of automatic splice.
Automatic splices are used on ACSR, AAC, AAAC conductor for an instant, positive and automatic connection, ANSI C119.4 Full Tension Class A connector.

Applications
Color-coded end piece provides instant visual identification of maximum conductor size
Funnel-shaped end piece quickly guides conductor into right position for insertion.
Pilot cap envelops strands and guides conductor pass serrated jaws and into splice center.
Precisely die-casted jaw provides optimum contact area for greater range of conductor sizes, reducing inventory stocking requirements.
Compressing stainless-steel spring positions jaws for positive conductor acceptance.
Tubular centers stop automatically determining proper insertion length of conductors.
High-strength, aluminum alloy tube covers connection for superior corrosion protection and lasting service life.

Enclosed is the instruction sheet, save time and eliminate potential for errors during installation.

Specification

Size

ACSR (mm²)

AAAC (mm²)

AAC (mm²)

(mm)

Conductor Diameter Range in / (mm)

ASTM-B232

ASTM-B399

ASTM-B231

AS4 (GL-402A)

349

21.2

0.229-0.265/(5.81-6.73)

AS2 (GL-404A)

349

21.2

0.265-0.335/(6.73-8.5)

AS42 (GL-4042A)

349

21.2

0.229-0.340/(5.81-8.63)

AS4210 (GL-406A)

413

29.2

0.280-0.397/(7.11-10.08)

AS1020 (GL-4076A)

413

29.2

0.365-0.475/(9.27-12.06)

AS30 (GL-408)

559

44.2

0.502-0.531/(12.75-13.48)

AS3040 (GL-4098)

120

559

44.2

0.502-0.585/(12.75-14.86)

AS40266 (GL-410)

150

559

44.2

0.532-0.641/(13.51-16.28)

AS266336 (GL-411)

150

559

44.2

0.580-0.724/(14.73-18.38)

AS397 (GL-412)

185

686

50.8

0.740-0.815/(18.80-20.7)

AS477 (GL-413)

240

820

56.9

0.810-0.881/(20.57-22.38)

AS636 (GL-414)

300

879

63.0

0.885-1.003/(22.48-25.47)

COTRAN ECap Cold Shrink Rubber EPDM End Cap

COTRAN Cold shrink rubber end caps are usually used for environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. Cold shrink EPDM end caps are close-ended, tubular rubber tube that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage, like moisture, contamination and corrosion etc.

Silicone rubber cold shrink tube En-CST

◆IPX8 class, stable and long-life during operation

◆Easy to install, only two steps (Cover, pull)

◆Fast installation, only 15-30 seconds needed to seal one connection

◆No limitation of spare space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,

◆Easy to uninstall, only need knife to cut tube open

◆No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance

◆Much time cost, and labor cost saving

◆Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone

Aluminum Extruded Tube for Electric Car Battery Pack

◆Large thermal dissipation area

◆High thermal dissipation efficiency

◆Low leakage risk and high reliability

◆Stable and high production efficiency

◆Reduce the weight of the battery pack

◆Low energy for single cylindrical battery

◆Improve the battery life and performance

◆Less pollution and environmental protection

64/110KV YJZGG Dry Insulated Gis Termination For 64/110kv Xlpe Cable

Dry GIS termination has composite structure of stress cone and epoxy sheath, making the surface of pre-fabricated stress cone clinged to the inner wall of epoxy sheath through spring assembly to reach reasonable interface pressure.

Categories