COTRAN Z551 Self-Fusing Silicon Rubber Tape

COTRAN Z551 self-fusing silicon rubber tape is composed of self-fusing silicone rubber and easily removed liner. It has excellent resistance to tracking, ozone, UV, corrosion, water and continuous operating temperature of -50℃~180℃. It can be used in dirty areas. Suitable for busbar insulation protection and phase identification, Insulation for terminations and joints of high-voltage power cables up to 35kV, Insulation for submarine cables, submersible motors, large-sized generators, automobiles, aero engines and other electrical equipment.

Product Features

  • Excellent weather resistance (anti-ozone, UV), long-term outdoor use does not fade
  • Flexible and tensile, good fit
  • Excellent electrical insulation, anti-tracking characteristics
  • High and low temperature resistance, stable long-term performance at -50℃~180℃


Technical Properties

Property

Unit

Test Method

Typical Value

Tensile strength

MPa

ASTM D 4325

4.1MPa

Ultimate elongation

%

ASTM D 4325

568%

Dielectric strength

kV/mm

ASTM D4325

26.9

Volume resistivity

Ω.cm

ASTM D1000

2.36×1013

Heat ageing (180 168h)

ASTM D4325

Pass

Note: Technical information provided consists of typical product dates and should not be used for specification purposes.


Usage

Remove the liner and stick the adhesive side to the objects tightly, then wrap the tape in half-lapped layers round the objects


Specification

Type

Width(mm)

Thickness(mm)

Length(m)

Color

Rolls/Case

Z551

50

0.8

5

Red, Yellow, Green, Black

40

Note: Other size is available on request.


Shelf life and Storage

COTRAN Z551 self-fusing silicon rubber tape has 2 year's shelf life from date of manufacture when stored in a humidity controlled storage (-10 °C to 40 °C and <75% relative humidity).


Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
Electrical Insulation Silicone Rubber Tape
Heat Resistant Silicone Rubber Electrical Tape KC73
Highly tracking resistance
Resistance to solvents
Withstand high/low temperature
Resistance to ozone, UV, and xenon exposure
Harmonica Water Cold Tube
New Energy Power Battery Harmonica Water Cold Tubes

◆High material utilization

◆Battery side heat dissipation

◆Large thermal dissipation area

◆High thermal dissipation efficiency

◆Low leakage risk and high reliability

◆Stable and high production efficiency

◆Reduce the weight of the battery pack

◆Improve the battery life and performance

Shear bolt Connector&Lug
Shear bolt Connector&Lug


The shear bolt connectors are intended for stranded and solid aluminum and copper cable, low voltage and medium voltage up to 36 kV.

They comprise cable areas 10-400 mm² even bigger for sector cable. There is also a screw sleeve for branches up to a total of 100 mm². The joint with the conductor is achieved by the screws in the connector or terminal being tightened to a predetermined torque.


Heat Shrinkable Identification Sleeves
COTRAN TMS 135 Military Grade Heat Shrinkable Identification Sleeves

Special designed to meet the requirements of high performance identification of wire and cable. It is made of superior flame retardant polyolefin with excellent electrical, physical, chemical and printing properties. Permanent printing property can be widely used for high-performance identification of wire and cables in industrial, military, aerospace, etc.

Water Proofing Butyl Tape
Self-adhesive Water Proofing Butyl Tape KC101
◆ High adhesion

◆ Weather resistance

◆ High flexibility

◆ High elongation at break

Flexible Cold Shrink Tube
Customized silicone rubber cold shrink tube enRR-CST

IPX8 class, stable and long-life during operation

Easy to install, only two steps (Cover, pull)

Fast installation, only 15-30 seconds needed to seal one connection

No limitation of spare space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,

Easy to uninstall, only need knife to cut tube open

No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance

Much time cost, and labor cost saving

Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone


Bi-Metal Lug
Bi-Metal Cable Lug and Connector

Bi-metal cable lug and Bi-metal cable connector are made from the highest quality aluminium and copper. Joined using a friction welding process.

Harmonica Cooling Tube
Electric Vehicle Power Battery Harmonica Cooling Tube

◆Large thermal dissipation area

◆High thermal dissipation efficiency

◆Low leakage risk and high reliability

◆Stable and high production efficiency

◆Reduce the weight of the battery pack

◆Low energy for single cylindrical battery

◆Improve the battery life and performance

◆Less pollution and environmental protection

Subscribe
Subscribe to our newsletter and stay up to date with the latest news and deals !

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact