EPR High Voltage Insulation Tape KC71

◆ Can be used to splice and terminate cable, the emergency overload temperatures can reach 130℃.

◆ Based on Ethylene Propylene Rubber(EPR).

◆ Physical and electrical properties are unaffected by the degree of stretch.

◆ Self-fusing tape.

◆ Excellent electrical properties.

◆ A special polyester liner which will not stick to the tape upon unwind.

◆ Operation and installation easily.

◆ Compatible with all solid dielectric cable insulation:

Polyethylene (high and low density).

Cross-linked polyethylene (XLPE).

Polyvinyl chloride (PVC).

Butyl rubber.

Inquiry now

product introduction

Product Description

Cotran Brand KC71 EPR High Voltage Insulation Tape is a highly conformable, self-fusing ethylene propylene

rubber(EPR), high insulting tape. KC71 is used for main insulation applications of cableand other electrical devices up to69KV.

Applications

◆ Electrical insulation jacketing in splices of solid dielectric cable up to 69kV.

◆ Building stress cones in terminations of solid dielectric cable up to 35kV.

◆ Jacketing of indoor terminations.

◆ Moisture sealing electrical connections.

◆ Bus bar insulations and corrosion protection.

◆ End sealing high-voltage cables.

◆ Jacket repair and restoration in all types of cable.

Test Parameters

No.	Test Item	Typical Value	Test Method
1	Color	Black	Visual
2	Thickness	0.76mm	ASTM D4325
3	Tensile Strength	2.3MPa	ASTM D4325
4	Elongation at Break	750%	ASTM D4325
5	Dielectric Strength	32KV/mm	ASTM D1000
6	Volume resistivity	6.2x1014Ώ.cm	ASTM-D4325
7	Fusion	Pass	ASTM D4388
8	Heat ageing(130℃ 168H)	Pass	ASTM D4325
9	UVageing	Pass	ASTM D4325
10	Xenon ageing	Pass	ISO 4892-2

Installation

Cotran Brand KC71 EPR High Voltage Insulation Tape should be applied in successive half-lapped, level-wound layers until desired build-up is reached.

Step 1 Perform normal cable preparation, and remove separator from tape;

Step 2 Apply tape half-lapped, stretching the tape 100%, which is enough to reduce its width to around 2/3 of its original width;

Step 3 Finish breaking the tape by holding it with your thumb and stick the end well.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : EPR High Voltage Insulation Tape KC71

Tags :

Related products

EPR Electrical Semi-conducting Tape KC72

◆ Can be used to repair XLPE cable terminations and joints or shielding for other devices up to 110kV.

◆ Retains its conductivity when stretched.

◆ Semi-conducting (low resistivity).

◆ Suitable for irregular shapes cable with good elongation.

◆ Withstand high temperatures (130°C/266°F) short-term overload.

◆ Compatible with all solid dielectric cable insulations and conductors.

◆ Resistance to ozone, solvents, UV, xenon exposure and moisture.

◆ Suitable for indoor or outdoor applications.

◆ Operation and installation easily.

◆ Increases its conductance and will not harm it in any way.

Robotic Coating Tornado X526

COTRAN tornado X526 light insulation material is a self-curing insulating coating material for robot coating. The coating material can be quickly constructed and cured at room temperature. After curing, it has good insulation properties, ultraviolet resistance, strong adhesion, mechanical wear resistance and heat resistance.

The robot coating device is composed of walking module, coating module and wireless control system. It can carry out automatic insulation treatment for 35kV and below overhead bare wires, and can work with live line, automatic up and down line, safe construction, convenient and efficient. After processing, it can effectively prevent insulation hazards such as tree barriers, small animal contact, and external short circuit, and improve the reliability of the power supply of the distribution network.

Heat Shrink End Cap

Applications：

Recommended for applications both in open air and underground power distribution cables with PVC ,lead or XLPE sheaths.

Color Coding Electrical PVC Tape KC61

◆ High tensile strength.

◆ High elongation.

◆ Good insulation property.

◆ Excellent electrical properties.

◆ Good shape retention.

◆ Operation and installation easily.

◆ RoHS 2011/65/EU(2015/863/EU)compliant.

Heat Shrink Semi-Conductive Tube (1~36kV)

Applications：

Specially developed chemical formulation provides effective insulation screen on the high voltage cable connectors.

Aluminum Extruded Water Cold Tube for New Energy Automobile

◆High production efficiency

◆Large thermal contact area

◆Uniform and stable welding

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high security

Insulating Busbar Cover Protection up to 11 KV, 24KV, 36KV

Product Introduction

Made from specially formulated radiation cross-linked compounds. It can provide high resistance to tracking and arcing. Used to enhance the insulation properties of busbar in switch and substation to safe protect up to safe protect up to 11 kv, 24kv, 36kv.