Low Voltage Cast Resin Straight Through Joint

COTRAN cast resin joint kits are reliable jointing solutions for intermediate connectors of wires and cables. The cast resins without filler are high quality, and fast setting resin for tough ambient conditions. Ideal for power cable accessories as insulation or as protective layer in case of MV joints. The products have the advantages of excellent waterproof performance, convenient installation, excellent electrical performance and long-term immersion in water.

Inquiry now

product introduction

Technical Properties

The properties of the two-component cast resins after mixing and full curing are as follows:

Test item	Requirement	Typical Value	Testing standard
Voltage test at 23℃ 80℃	No breakdown at test voltage 20kV 10kV	>20kV >10kV	DIN VDE 0291
Dielectric dissipation factor 23℃ and 50Hz 23℃ and 1kHz	max. 0.1 -	0.08 0.05	DIN VDE 0291
Relative permittivity 3℃ and 50Hz 23℃ and 1kHz	< 6 -	5 5.1	DIN VDE 0291
Tracking resistance	min. KA 3c	KA 3c	DIN VDE 0291

Selection table

Cast Resin Joints	L(mm)	H(mm)	D1(mm)	D2(mm)	Note
CRK-S1	202	36	8	26	Apply to 1- 4 cores cable，conductor cross-section of 1.5-300mm²
CRK-S2	260	47	16	32
CRK-S3	360	55	21	38
CRK-S4	400	70	26	41
CRK-S5	530	100	35	56
CRK-S6	700	125	47	74

Kit Components

Part	PCs
Transparent mould body	1
Connector spacer	1
Insulating tape	1
PUR resin kit (2 chambers)	1 kit (2 chambers)
Abrasive paper	1
Installation instructions	1
Funnel (optional)	1
Connector (optional)	Provided on request

Storage

CRK-S cast resin joint kits should be stored in a humidity controlled storage (10°C to 40°C and < 75% relative humidity).

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Low Voltage Cast Resin Straight Through Joint

Tags :

Related products

Heat Shrinkable Cable Straight Termination Kit Cable Joint(8.7/15kV-26/35kV)

Straight Through Jointing Kit offered provide for suitable insulating and sealing performance and feature use of heat shrinkable and resin.

Elbow Surge Arrester (6~15kV)

Applications：

suitable for American 200A electrical system, installed on the 200A interface of the high voltage outlet of American box substation, ring main cabinet, cable branch box, buried transformer and other electrical equipment to provide overvoltage protection for electrical equipment.

The product interface complies with the 200A casing design in the standard IEEE386.

T rear with double protection surge arrestor (6~35kV)

Applications：

Provide lightning protection and over-voltage protection, can effectively ensure the safe operation of the power grid.

Fire Retardant Tape KC77

KC77 Fire Retardant Tape is a flexible tape with high expansion rate, fire prevention and heat insulation. It is mainly used for fireproof plugging of cracks around single or cluster cables, wind pipe, plastic pipe penetrations and metal penetrations. It has good water resistance, acid and alkali resistance, moisture and heat resistance, and freeze-thaw resistance. It is free of volatile organic matter, asbestos, fiber dust and other harmful substances, safety and environmental protection without pollution. It uses the combination of chemical expansion and physical expansion technology, rapid expansion in case of fire, with the rise of temperature formed with the strength of the carbonization layer tightly filled through the holes of the gap, block the spread of flame and smoke, with more than 3 hours of fire aging. At the same time, the product in the harsh, dirty and other outdoor environment, still can maintain the normal fire function.

KC96 EPDM Cold Shrink Tube

◆ High elastic EPDM rubber tube structure.
◆ Good puncture resistant, abrasion resistance, acid and alkali resistance.
◆ 20 years long lifetime during operation.
◆ Easy to install, only two steps (Cover, pull).
◆ Fast installation, only 15-30 seconds needed to seal one connection.
◆ No limitation of spare space, especially design for narrow space.
◆ Easy to uninstall, only need knife to cut tube open.
◆ No skill required by engineers, uniform quality after installation, stable and good sealing and
◆ Weatherproofing performance.
◆ Much time and labor cost saving.
◆ Good operating capability under hash environmental condition, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone.