Applications：

made from radiation cross-linked polyolefin, Designed for applications to seal and protect power cable joints from 11kV to 36kV.

Applications：

designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.

Applications：

The Separable Connector establishes the connection between any polymeric insulated cable onto transformers, switchgears, motors or other equipment.

Applications：

suitable for American 200A electrical system, installed on the 200A interface of the high voltage outlet of American box substation, ring main cabinet, cable branch box, buried transformer and other electrical equipment to provide overvoltage protection for electrical equipment.

The product interface complies with the 200A casing design in the standard IEEE386.

Applications：

The electrically semi-conductive property of the breakout provides effective conductive screen and sealing protection to the cable terminations. The breakout can be used to cable terminations up to 36kV.

Applications：

Provide lightning protection and over-voltage protection, can effectively ensure the safe operation of the power grid.

Applications：

Recommended for applications both in open air and underground power distribution cables with PVC ,lead or XLPE sheaths.

Applications：

Cable lugs are suitable for the conjunction of wires, cables in the distribution equipment and the electrical equipment. DT series of copper connecting terminals with copper cable, DL series of aluminum connecting terminals with aluminum cable.

Applications：

Cable Connector are applicable to connect the circular wires and cables. GT series of copper connectors are used for copper cable connections, GL series of aluminum connectors are used for aluminum cable connections.

Product Introduction

Made from radiation cross-linked polyolefin. The dual layer structure of insulation/hot melt adhesive effectively provides electric insulation and shock protection to busbar up to 24KV. Widely used to protect irregular shape busbar or connectors where tube products can not be applied.

Product Introduction

Made from specially formulated radiation cross-linked compounds. It can provide high resistance to tracking and arcing. Used to enhance the insulation properties of busbar in switch and substation to safe protect up to safe protect up to 11 kv, 24kv, 36kv.