Stress Release Mastic Tape KC100

Self-fusing stress ralieving
Resstance to weather and ageing

KC100 is a highly conformable, flexible, self-fusing a stress relieving, nitrile-butadiene rubber (NBR) based mastic tape. It is designed to control electric stress by reshaping the electrical field and build up a voltage gradient across the adjacent cable for cable joints and terminations through 36KV.


Technical Data

Property
Typical Value
Test Method

Volume Resistivity

10^10~10^34 Ω.mm GB/T 1692-2008

Elongation at break

500% GB/T 528-2009

Dielectric Strength

31.93KV/mm GB/T 1695-2005

Dielectric Constant

15~18 GB/T 1693-2007



Packing

Part No. Dimension Color Rolls/Case
KC100
30mm*2mm*360m
Yellow
500

Note: Other size is available on request.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
composite insulator termination
64/110kv YJZWFY Outdoor Termination with Composite Insulator For 64/110kv Xlpe Cable
Composite sheath has many advantages compared with traditional porcelain sheath, so it is the best substitute and has been accepted gradually all over the world.
Micro-Channel Serpentine Tube
Electric Vehicle Power Battery Micro-Channel Serpentine Tube

◆Large thermal dissipation area

◆High thermal dissipation efficiency

◆Low leakage risk and high reliability

◆Stable and high production efficiency

◆Reduce the weight of the battery pack

◆Low energy for single cylindrical battery

◆Improve the battery life and performance

◆Less pollution and environmental protection

Roll Bonded Water Cold Sheet
New Energy Automobiles Roll Bonded Water Cold Sheet

◆Flexible flow channel design

◆Thin thickness to save space

◆Easy processing and shaping

◆Large thermal dissipation area

◆Low leak risk and high reliability

◆Good tightness and high strength

◆High thermal dissipation efficiency

◆Stable and high production efficiency

Shear bolt Connector&Lug
Shear bolt Connector&Lug


The shear bolt connectors are intended for stranded and solid aluminum and copper cable, low voltage and medium voltage up to 36 kV.

They comprise cable areas 10-400 mm² even bigger for sector cable. There is also a screw sleeve for branches up to a total of 100 mm². The joint with the conductor is achieved by the screws in the connector or terminal being tightened to a predetermined torque.


Silicone Cold Shrink Tube
Silicone Cold Shrink Tube With Mastic KC97
◆ High elastic silicone rubber tube structure with mastic built-in, dual layers design can bring double guarantee of weatherproofing protection;
◆ IPX8 class, stable and long life during operation;
◆ Easy to install, only three steps (Cover, pull and clench);
◆ Fast installation, only 15-30 seconds needed to seal one connection
◆ No limitation of spare space, especially design for narrow space, high density connectors mounted equipment  such as scenario of 3G and; 4G combination site, multi-band antenna), also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,
◆ Easy to uninstall, only need knife to cut tube open and no sticky mastic left;
◆ No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance;
◆ Much time cost, and labor cost saving;
◆ Perfect SWR performance approved by telecom operators;
◆ Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone;
◆ Widely deployed for telecom projects wherever in China domestic and oversea;
Heat Shrink Tube
COTRAN FEP 200℃ Temperature Resistant FEP Heat Shrinkable Tubing

FEP heat shrinkable tubing is made of FEP with excellent 200℃ high-temperature performance, chemical resistance, high insulation and excellent mechanical properties. FEP has excellent abration resistance and excellent clarity. Designed to provide insulation and mechanical protection in severe chemical and thermal environments. Widely used in electronic, aerospace, military and communication fields.

Aluminum Water Cooling Plate
Electric Automobile Aluminum Water Cooling Plate

◆High processing efficiency

◆Lower energy consumption

◆Large thermal transfer area

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Excellent thermal performance

◆Low leak risk and high reliability

◆Good tightness and high strength

Heat Shrinkable Identification Sleeves
COTRAN GHT 225 Military Grade High-temperature Resistant Heat Shrinkable Identification Sleeves

Special designed to meet the requirements of high performance identification of wire and cables in high temperature applications or where extreme resistance to fuels, lubricants and cleaning solvents is required. It is made of special fluoropolymer with excellent electrical, physical, chemical properties and permanent printing properties. Widely used in high-temperature permanent identification industry, military, aerospace, etc.

Subscribe
Subscribe to our newsletter and stay up to date with the latest news and deals !

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact