EPR High Voltage Insulation Tape KC71

◆ Can be used to splice and terminate cable, the emergency overload temperatures can reach 130℃.

◆ Based on Ethylene Propylene Rubber(EPR).

◆ Physical and electrical properties are unaffected by the degree of stretch.

◆ Self-fusing tape.

◆ Excellent electrical properties.

◆ A special polyester liner which will not stick to the tape upon unwind.

◆ Operation and installation easily.

◆ Compatible with all solid dielectric cable insulation:

Polyethylene (high and low density).

Cross-linked polyethylene (XLPE).

Polyvinyl chloride (PVC).

Butyl rubber.

Inquiry now

product introduction

Product Description

Cotran Brand KC71 EPR High Voltage Insulation Tape is a highly conformable, self-fusing ethylene propylene

rubber(EPR), high insulting tape. KC71 is used for main insulation applications of cableand other electrical devices up to69KV.

Applications

◆ Electrical insulation jacketing in splices of solid dielectric cable up to 69kV.

◆ Building stress cones in terminations of solid dielectric cable up to 35kV.

◆ Jacketing of indoor terminations.

◆ Moisture sealing electrical connections.

◆ Bus bar insulations and corrosion protection.

◆ End sealing high-voltage cables.

◆ Jacket repair and restoration in all types of cable.

Test Parameters

No.	Test Item	Typical Value	Test Method
1	Color	Black	Visual
2	Thickness	0.76mm	ASTM D4325
3	Tensile Strength	2.3MPa	ASTM D4325
4	Elongation at Break	750%	ASTM D4325
5	Dielectric Strength	32KV/mm	ASTM D1000
6	Volume resistivity	6.2x1014Ώ.cm	ASTM-D4325
7	Fusion	Pass	ASTM D4388
8	Heat ageing(130℃ 168H)	Pass	ASTM D4325
9	UVageing	Pass	ASTM D4325
10	Xenon ageing	Pass	ISO 4892-2

Installation

Cotran Brand KC71 EPR High Voltage Insulation Tape should be applied in successive half-lapped, level-wound layers until desired build-up is reached.

Step 1 Perform normal cable preparation, and remove separator from tape;

Step 2 Apply tape half-lapped, stretching the tape 100%, which is enough to reduce its width to around 2/3 of its original width;

Step 3 Finish breaking the tape by holding it with your thumb and stick the end well.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : EPR High Voltage Insulation Tape KC71

Tags :

Related products

EPR Electrical Semi-conducting Tape KC72

◆ Can be used to repair XLPE cable terminations and joints or shielding for other devices up to 110kV.

◆ Retains its conductivity when stretched.

◆ Semi-conducting (low resistivity).

◆ Suitable for irregular shapes cable with good elongation.

◆ Withstand high temperatures (130°C/266°F) short-term overload.

◆ Compatible with all solid dielectric cable insulations and conductors.

◆ Resistance to ozone, solvents, UV, xenon exposure and moisture.

◆ Suitable for indoor or outdoor applications.

◆ Operation and installation easily.

◆ Increases its conductance and will not harm it in any way.

Aluminum Electric Automobile Battery Liquid Cooling Plate

◆Good surface smoothness

◆Large thermal transfer area

◆Optional flow channel design

◆Easy processing and shaping

◆Excellent thermal cooling effect

◆Low leakage risk and high reliability

◆Stable and high production efficiency

◆Good pressure resistance and strength

New Energy Automobiles Roll Bonded Water Cold Sheet

◆Flexible flow channel design

◆Thin thickness to save space

◆Easy processing and shaping

◆Large thermal dissipation area

◆Low leak risk and high reliability

◆Good tightness and high strength

◆High thermal dissipation efficiency

◆Stable and high production efficiency

High Frequency Welding Aluminum Liquid Cooled Tube

◆High production efficiency

◆Large thermal contact area

◆Uniform and stable welding

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high security

Stress Release Mastic Tape KC100

◆ Self-fusing stress ralieving
◆ Resstance to weather and ageing

Silicone Rubber Cold Shrink Tube With Mastic en-KC97

◆ High elastic silicone rubber tube structure with mastic built-in, dual layers design can bring double guarantee of weatherproofing protection；
◆ IPX8 class, stable and long-life during operation；
◆ Easy to install, only two steps (Cover, pull)；
◆ Fast installation, only 15-30 seconds needed to seal one connection；
Easy to uninstall, only need knife to cut tube open；
◆ No limits for installation space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,
◆ No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance；
◆ Much time cost, and labor cost saving；
◆ Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone；

Electric Automobile Aluminum Water Cooling Plate

◆High processing efficiency

◆Lower energy consumption

◆Large thermal transfer area

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Excellent thermal performance

◆Low leak risk and high reliability

◆Good tightness and high strength

Heat-absorbing and Fireproof Blanket KC9000

KC9000 heat-absorbing and fireproof blanket is a fireproof product that can be directly coated on the external protection of equipment, power cable, cable bridge, etc., which can effectively prevent flame spread and reduce the serious damage caused by high temperature conduction.

Categories