Heat Shrinkable Cable Straight Termination Kit Cable Joint(8.7/15kV-26/35kV)

Straight Through Jointing Kit offered provide for suitable insulating and sealing performance and feature use of heat shrinkable and resin.

Inquiry now

product introduction

KC2316 for 8.7/15kV, 18/30kV , 19/33kV, 26/35kV are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48, IEEE-404, IEC60502. Our wraparound tape straight joint offers reliable and consistent performance for longer service?life. We provide different solutions where different kinds of cable jointing through 40.5kV.

1. Same Cable Cross Section (WTSJ1)

2. Different Cable Cross Section (WTSJ2)

Adding cable conductor

Using customized cable ferrule

3. Shortage of Cable Length (WTSJ3)

4. Different Type of Cable Jointing (PILC - XLPE)(WTSJ4)

Procedures

1. Prepare Cable

2.Wrap tape around the joint

3.Water-proofing treatment

4. Armor protection treatment

Note: Other size is available on request.

Certificates:

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Heat Shrinkable Cable Straight Termination Kit Cable Joint(8.7/15kV-26/35kV)

Tags :

Related products

Elbow Surge Arrester (6~15kV)

Applications：

suitable for American 200A electrical system, installed on the 200A interface of the high voltage outlet of American box substation, ring main cabinet, cable branch box, buried transformer and other electrical equipment to provide overvoltage protection for electrical equipment.

The product interface complies with the 200A casing design in the standard IEEE386.

T rear with double protection surge arrestor (6~35kV)

Applications：

Provide lightning protection and over-voltage protection, can effectively ensure the safe operation of the power grid.

Low Voltage Cast Resin Straight Through Joint

COTRAN cast resin joint kits are reliable jointing solutions for intermediate connectors of wires and cables. The cast resins without filler are high quality, and fast setting resin for tough ambient conditions. Ideal for power cable accessories as insulation or as protective layer in case of MV joints. The products have the advantages of excellent waterproof performance, convenient installation, excellent electrical performance and long-term immersion in water.

Heat Shrinkable Busbar Insulation Tube

Designed for insulation of copper and aluminum busbars- for electrical substations and switchgear cabinets. Can be used for exterior installations

Shrink ratio: 2.5:1

Operating voltage: 35 kV

Material: polyolefin, halogen-free (HF)

Analogs: BPTM (Raychem); BBI (3M)

Resistant to the phenomenon of tracking and UV radiation

High dielectric strength

Color: brick red

Shorten the distance between phase busbars and significantly reducing the dimensions of the device

Protect electrical busbars against chemical corrosion

Protect equipment from short circuits in case of contact of electrical devices with animals and birds

New Energy Automobile Battery Pack Harmonica Tube

◆Uniform and stable welding

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk and high security

◆Less pollution and environmental

◆Improve the battery performance

COTRAN PVDF175 Tube

COTRAN PVDF175 tube is transparent, thin wall PVDF (polyvinylidene fluoride) heat shrink tube designed for electronic, automotive and military applications requiring protection and see-through inspection in aggressive environments.