Low Voltage Cast Resin Straight Through Joint

COTRAN cast resin joint kits are reliable jointing solutions for intermediate connectors of wires and cables. The cast resins without filler are high quality, and fast setting resin for tough ambient conditions. Ideal for power cable accessories as insulation or as protective layer in case of MV joints. The products have the advantages of excellent waterproof performance, convenient installation, excellent electrical performance and long-term immersion in water.

Inquiry now

product introduction

Technical Properties

The properties of the two-component cast resins after mixing and full curing are as follows:

Test item	Requirement	Typical Value	Testing standard
Voltage test at 23℃ 80℃	No breakdown at test voltage 20kV 10kV	>20kV >10kV	DIN VDE 0291
Dielectric dissipation factor 23℃ and 50Hz 23℃ and 1kHz	max. 0.1 -	0.08 0.05	DIN VDE 0291
Relative permittivity 3℃ and 50Hz 23℃ and 1kHz	< 6 -	5 5.1	DIN VDE 0291
Tracking resistance	min. KA 3c	KA 3c	DIN VDE 0291

Selection table

Cast Resin Joints	L(mm)	H(mm)	D1(mm)	D2(mm)	Note
CRK-S1	202	36	8	26	Apply to 1- 4 cores cable，conductor cross-section of 1.5-300mm²
CRK-S2	260	47	16	32
CRK-S3	360	55	21	38
CRK-S4	400	70	26	41
CRK-S5	530	100	35	56
CRK-S6	700	125	47	74

Kit Components

Part	PCs
Transparent mould body	1
Connector spacer	1
Insulating tape	1
PUR resin kit (2 chambers)	1 kit (2 chambers)
Abrasive paper	1
Installation instructions	1
Funnel (optional)	1
Connector (optional)	Provided on request

Storage

CRK-S cast resin joint kits should be stored in a humidity controlled storage (10°C to 40°C and < 75% relative humidity).

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Low Voltage Cast Resin Straight Through Joint

Tags :

Related products

Heat Shrinkable Cable Straight Termination Kit Cable Joint(8.7/15kV-26/35kV)

Straight Through Jointing Kit offered provide for suitable insulating and sealing performance and feature use of heat shrinkable and resin.

Elbow Surge Arrester (6~15kV)

Applications：

suitable for American 200A electrical system, installed on the 200A interface of the high voltage outlet of American box substation, ring main cabinet, cable branch box, buried transformer and other electrical equipment to provide overvoltage protection for electrical equipment.

The product interface complies with the 200A casing design in the standard IEEE386.

T rear with double protection surge arrestor (6~35kV)

Applications：

Provide lightning protection and over-voltage protection, can effectively ensure the safe operation of the power grid.

Moisture Proof Sealing Material KC3000

KC3000 Moisture proof sealing material is widely used for moisture proof sealing in distribution control cabinet, RMU, HV/LV switch cabinet, cable branch box, terminal box, pad-mounted transformer, mechanism operation box, assembly control unit, which has low viscosity, good fluidity and easy penetration, resistant to natural freeze-thaw cycle and all kinds harsh environment, while no deformation, no deterioration, no cracking.

With a variety of metal materials, cable sheath material can be closely bonded and not corroded, but also effectively prevent small animals from underground into the cabinet, reduce safety risks; to realize the closed cabinet moisture proof, prevent cable interlayer or channel from moisture, to provide reliable protection for production and operation equipment.

Cable Tray KC10

KC10 Cable trough box is a glass fiber reinforced plastic cable trough box, which is made of high-flame retardant polyester and high-density glass fiber. The product has the characteristics of good insulation, high strength, corrosion resistance, acid and alkali resistance, aging resistance, fire and flame retardant, good environmental adaptability (-50℃-60℃), odorless, and light weight. This product is only 1/4 the weight of the steel cable trough and 1/10 the weight of the cement cable trough. It is easy to install, low cost, long service life, and has the anti-theft function. All technical indicators are in line with the relevant technical requirements of the Monitoring Center of the Ministry of Transport and the Product Quality Supervision and Inspection Center of the Ministry of Railways. They are especially suitable for highways, railways, tunnels, electric power, petroleum, chemical, municipal government and other projects. Ministry and other relevant departments and users unanimously praised.

Premium Color Coding Electrical PVC Tape KC60

◆ High tensile strength and elongation rate.

◆ Good insulation property.

◆ Excellent electrical properties.

◆ Operation and installation easily.

◆ RoHS 2011/65/EU(2015/863/EU) compliant.

◆ various colors are available.

KC80-S Cable Insulation Sealing Protective Pad

KC80-S cable insulation sealing protective pad is a self-adhesive sheet made of EPR rubber and butyl mastic, which has excellent weather resistance, wear resistance, insulation, waterproof and other properties. It is mainly used for the repair of cable outer sheath, the coating of power fittings, insulation protection and other scenarios. It provides excellent waterproofing performance and temperature stability. Operating temperature rated to 90°C. Emergency overload rating to 130°C.