COTRAN DR Diesel Resistant Elastomer Heat Shrink Tube

Product introduction

Made of modified radiation crosslinked elastomer, it has excellent resistance to diesel oil, chemical agents, high temperature fluids, long-term heat resistance and wear resistance. It is used for the protection of military or automotive cable terminals, separation joints, etc., and the working temperature range of the cable harness is wide, and the environment of diesel, aviation fuel, hydraulic oil, lubricating oil and other fluids is required.

Inquiry now

product introduction

Features

High and low temperature resistance, flame retardant, chemical resistance
Soft, oil resistant, especially diesel
Full shrinkage temperature.: 175℃
Meet RoHS environmental requirements
Meets the SAE-AMS-DTL-23053/16 standard
Operating temperature: -65℃ to +150℃
Technical Parameters

Technical Parameters

No.	Test item	Requirements	Test Method
1	Longitudinal shrinkage rate	-10% ~10%	ASTM D2671
2	Water absorption	≤2.0%max	ASTM D570
3	Tensile strength	≥11.7MPa	ASTM D2671
4	Elongation at break	≥250％	ASTM D2671
5	Insulation withstand voltage and breakdown	2500V,60sec, no breakdown	IEC 60243
6	Breakdown strength	11.9KV/mm min	ASTM D2671
7	Volume resistivity	10⁹Ω.cm min.	ASTM D2671
8	Elongation at break after aging	≥200％	UL 224
9	Tensile strength after aging	≥10.4MPa	UL 224
10	Thermal shock	200℃，4h, no cracks, no flow, no dripping on the outer wall	ASTM D2671
11	Low temperature flexibility	-65℃,4h, no crack	ASTM D2671
12	Copper corrosion	135℃，16h no corrosion	ASTM D130
13	Flame retardancy	Self-extinguishing in 1 minute	UL 224
14	Resistance to solvent aging tensile strength	≥10.4MPa	ASTM D2671
15	Resistance to solvent aging elongation at break	≥200％	ASTM D2671
16	Resistance to solvent aging breakdown	7.9KV/mm min	ASTM D2671
17	Mold resistance	No less than Level 1	GJB 150.10A-2009

Dimensions

Size (inch)	As supplied (mm)		After recovered (mm)		Standard Package（m/spool）
Size (inch)	D*(Min.)	W*	d*(Max.)	w*(Min.)	Standard Package（m/spool）
1/8	3.2	0.40	1.6	0.76±0.15	100
3/16	4.8	0.45	2.4	0.84±0.15	100
1/4	6.4	0.50	3.2	0.89±0.15	100
3/8	9.5	0.55	4.8	1.02±0.20	50
1/2	12.7	0.60	6.4	1.22±0.20	50
3/4	19.1	0.70	9.5	1.45±0.28	30
1	25.4	0.85	12.7	1.78±0.28	30
1 1/2	38.1	1.10	19.1	2.41±0.41	30
2	50.8	1.30	25.4	2.79±0.41	25

D* = Inner diameter as supplied

W*= Wall thickness as supplied

d* = Inner diameter after fully recovered

w*= Wall thickness after fully recovered

Storage

COTRAN DR diesel resistant elastomer heat shrink tube is stored at 10°C to 40°C with relative humidity of less than 75% and has a shelf life of more than five years.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : COTRAN DR Diesel Resistant Elastomer Heat Shrink Tube

Tags :

Related products

Heat Shrinkable Busbar Insulation Tube

Designed for insulation of copper and aluminum busbars- for electrical substations and switchgear cabinets. Can be used for exterior installations

Shrink ratio: 2.5:1

Operating voltage: 35 kV

Material: polyolefin, halogen-free «HF»

Analogs: BPTM (Raychem); BBI (3M)

Resistant to the phenomenon of tracking and UV radiation

High dielectric strength

Color: brick red

The use of tubes ТТШ allows shortening the distance between phase busbars and significantly reducing the dimensions of the device

Protects electrical busbars against chemical corrosion

Protects equipment from short circuits in case of contact of electrical devices with animals and birds

Heat shrink cable accessories 10-36KV

Cotran heat shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48, IEEE-404, IEC60502. Our heat shrink terminations offers reliable and consistent performance for longer service life. We have designed our heat shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36KV.

Heat shrink cable accessories 1KV

Cotran heat shrink terminations and joints are composed of a series of pre-expanded adhesive lined heat shrink tubes and necessary accessories. Heat shrink and provide excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC/PILC, S/C, multi-core cable rated to 0.6/1kV.

Wraparound Repair Sleeve

Cotran wraparound repair sleeve (CWRS) is designed to repair damaged cable jackets and protect cable or pipes where needs corrosion protection on undamaged ones. CWRS is made from modified cross-linked polyolefin (XLPE) with a hot-melt adhesive. When heating, the sleeve shrinks and the adhesive melts, thereby achieving tightly bonding between the sleeve and the cable. It provides an excellent solution of protection against mechanical stress, harshest environments, moisture and corrosion.

CWRF is a fiber reinforced repair sleeve, which is composed of XLPE and fiber layer. It can provide better mechanical properties. CWRA is a fiber reinforced and aluminum layer reinforced repair sleeve, which is composed of XLPE, fiber layer, and aluminum layer. It can provide more stronger mechanical properties than CWRS and CWRF.

Heat Shrink Rain Shed (10~36kV)

Applications：

Used to provide insulation protection for cable outdoor termination in order to increase the creepage distance and avoid the formation of sewage for various of rod supporting insulators.