Marking set to identify cables for radio and antenna. Made of high quality plastic to suit for outdoor application.

◆ High tensile strength
◆ Rust poof
◆ Non-flammability
◆ Anti corrosion
◆ Weatherproof and UV resistant
◆ High resistance to aceticacid,alkaliacid,suiphuric acid, acorrode etc

◆ Can provide several type of cables, such as 1/4”, 1/2”, 7/8”, 5/4”, 13/8”, etc；
◆ Compact structure；
◆ Faster and easy installation；
◆ Contact resistance < 5mΩ；
◆ Weatherproofing IP67；
◆ No extra taping kit needed；
◆ UV and corrosion resistant；

1. Through Type Feeder Clamps for coaxial, fiber optic, power, hybrid and aerial cables;
2. The clamp is designed to support cables with the dimensions of 1/4”, 1/2”, 7/8”, 5/4”, 13/8”, 1/2”s, etc;
3. Quick and easy to install and operate;
4. Without additional adapters, provide sturdy, reliable, long-term support;
5. Wind loaded, UV and corrosion resistant;
6. Capable to working in extreme temperature;

1. Quick and easy to install and operate;
2. Without additional adapters, provide sturdy, reliable, long-term support;
3. Wind loaded, UV and corrosion resistant;
4. Capable to working in extreme temperature;

Material and Plating Inner Conductor Pin Brass / Silver Plating Inner Conductor Socket Tin Bronze / Silver Plating Insulator PTFE/TPX Body & Outer Conductor Brass / Trimetal Plating Gasket Silicon Rubber Electrical Specifications Characteristics Impedance 50 Ohm Frequency Range DC~7.5GHz Insulation Resistance ≥10000MΩ Dielectric Withstanding Voltage 4000V rms Operating Voltage 2700V rms Center contact resistance ≤0.4 mΩ Outer contact resistance ≤0.2 mΩ Insertion Loss @DC-2.7 GHz ≤0.10dB VSWR @0.8-1.0 GHz ≤1.08  @1.7-2.7 GHz ≤1.10 PIM3(2*43dBm) ≤-155dBc Environmental & Mechanical Specifications Durability (matings) ≥500 cycles Mechanical Shock Test Method MIL-STD-202, Method 213, Test Condition D Vibration Test Method MIL-STD-202, Meth. 204, Cond. A Temperature Range -65°C to +85°C RoHS Compliant Sealing Class IP68 24hr, 1m, 20℃ Regulatory Compliance / Certification ISO 9001:2015 Compliant The facts and figures contained herein are carefully complied to the best of our knowledge, but they are intended for general informational purposes only.

Material and Plating Inner Conductor Pin Brass / Silver Plating Inner Conductor Socket Tin Bronze / Silver Plating Insulator TPX Body & Outer Conductor Brass / Trimetal Plating Gasket Silicon Rubber Electrical Specifications Characteristics Impedance 50 Ohm Frequency Range DC~2.7GHz Insulation Resistance ≥5000MΩ Dielectric Withstanding Voltage 4000V rms Operating Voltage 2500V rms Center contact resistance ≤0.4 mΩ Outer contact resistance ≤0.2 mΩ Insertion Loss @DC-2.7 GHz ≤0.10dB VSWR @0.8-1.0 GHz ≤1.10  @1.7-2.7 GHz ≤1.13 PIM3(2*43dBm) ≤-155dBc Environmental & Mechanical Specifications Durability (matings) ≥500 cycles Mechanical Shock Test Method MIL-STD-202, Method 213, Test Condition D Vibration Test Method MIL-STD-202, Meth. 204, Cond. A Temperature Range -65°C to +85°C RoHS Compliant Sealing Class IP68 24hr, 1m, 20℃ Regulatory Compliance / Certification ISO 9001:2015 Compliant The facts and figures contained herein are carefully complied to the best of our knowledge, but they are intended for general informational purposes only.

Material and Plating Inner Conductor Pin Tin Bronze / Silver Plating Inner Conductor Socket Tin Bronze / Silver Plating Insulator TPX Body Brass / Trimetal Plating Gasket Silicon Rubber Electrical Specifications Characteristics Impedance 50 Ohm Frequency Range DC~6GHz Insulation Resistance ≥10000MΩ Dielectric Withstanding Voltage 2500V rms Operating Voltage 1400V rms Center contact resistance ≤1.5 mΩ Outer contact resistance ≤1.5mΩ Insertion Loss @DC-2.7 GHz ≤0.10dB VSWR @0.8-1.0 GHz ≤1.08 @1.7-2.7 GHz ≤1.10 PIM3(2*43dBm) ≤-160dBc Environmental & Mechanical Specifications Durability (matings) ≥500 cycles Mechanical Shock Test Method MIL-STD-202, Method 213, Test Condition D Vibration Test Method MIL-STD-202, Meth. 204, Cond. A Temperature Range -65°C to +85°C RoHS Compliant Sealing Class IP68 24hr, 1m, 20℃ Regulatory Compliance / Certification ISO 9001:2015 Compliant The facts and figures contained herein are carefully complied to the best of our knowledge, but they are intended for general informational purposes only.

Material and Plating Inner Conductor Pin Brass / Silver Plating Inner Conductor Socket Tin Bronze / Silver Plating Insulator TPX Body & Outer Conductor Brass / Trimetal Plating Gasket Silicon Rubber Electrical Specifications Characteristics Impedance 50 Ohm Frequency Range DC~2.7GHz Insulation Resistance ≥5000MΩ Dielectric Withstanding Voltage 2500V rms Operating Voltage 1400V rms Center contact resistance ≤1.5 mΩ Outer contact resistance ≤1.5mΩ Insertion Loss @DC-2.7 GHz ≤0.10dB VSWR @0.8-1.0 GHz ≤1.08 @1.7-2.7 GHz ≤1.13 PIM3(2*43dBm) ≤-155dBc Environmental & Mechanical Specifications Durability (matings) ≥500 cycles Mechanical Shock Test Method MIL-STD-202, Method 213, Test Condition D Vibration Test Method MIL-STD-202, Meth. 204, Cond. A Temperature Range -65°C to +85°C RoHS Compliant Sealing Class IP68 24hr, 1m, 20℃ Regulatory Compliance / Certification ISO 9001:2015 Compliant The facts and figures contained herein are carefully complied to the best of our knowledge, but they are intended for general informational purposes only.

The anticorrosive primer and PE anticorrosive tape together constitute the polyethylene cold wound anticorrosive system. Coated on the surface treatment of steel tube, can fill a small bump on the surface of the steel tube, and can increase the adhesive tape with sticky relay between steel tube, at the same time it is also a kind of excellent corrosion inhibitor.

1. The body of joint is made of imported silicone rubber with good quality, so it is with high strength, elasticity and tear resistance as well as excellent thermal

aging resistance.

2. The body of joint has integral pre-fabricate structure with high voltage shielded, stress cone and insulating injection pressed integration, so it has excellent properties and easy to test as well as install.

3. The body of joint is analized and computed optimization by finite element software, so it has more resonable field-intensity distribution and high insulation safety margin.

4. The body of insulating joint and straight through joint is the same, the d ifference is just the handling of shielding on-site installation, insulating joint with one side insulated and the rest shielded while staight through joint full shielded.

5. The joint has completely sealed structure with high mechanical strength and good sealing performance.

6. Joint protecting is made of insulating copper case with high-intensitive T2 copper, and the moulded high-density PE material of its external surface is used for insulation and anti-corrosion with good mechanical protection and permanent waterproof sealing performance, which ensure the joint to run safely and reliably in the long-term under harsh environment.In addition, it can equip glass fiber reinforced plastic protective box as a strengthen waterproof measure accordingly.

7. Special installer tools make the installation more convenient.

Designed for insulation of copper and aluminum busbars- for electrical substations and switchgear cabinets. Can be used for exterior installations

Shrink ratio: 2.5:1

Operating voltage: 35 kV

Material: polyolefin, halogen-free «HF»

Analogs: BPTM (Raychem); BBI (3M)

Resistant to the phenomenon of tracking and UV radiation

High dielectric strength

Color: brick red

The use of tubes ТТШ allows shortening the distance between phase busbars and significantly reducing the dimensions of the device

Protects electrical busbars against chemical corrosion

Protects equipment from short circuits in case of contact of electrical devices with animals and birds