Electrical Insulation Waterproof Vinyl Mastic Tape KC75

KC75 is a self-fusing, conformable, vinyl backing mastic tape. KC75 seals out moisture and protects against corrosion without the need for heating tools or using multiple tapes. KC75 is designed for cable sheath repair, low voltage insulating, conduit repair and protection of CATV components as well as other general taping applications.


Application

  • Electrostatic shielding solid dielectric cable connector and terminal
  • Filling all kinds of irregular joint
  • Repair of high-voltage connector conductor shielding layer
  • Other shielding occasions


Technical Data

Property
Typical Value
Test Method

Adhesion to steel

18.7N/10mm ASTM D 1000

Adhesion to PE

20.2N/10mm ASTM D 1000
Dielectric strength
21KV/mm ASTM D 4325
Volume Resistivity 1.66*10^34 Ω ASTM D 1000

Water Absorption

0.2% ASTM D 4325


Packing

Part No. Dimension Color Rolls/Case
KC75
38mm*0.635mm*6m
Black
40

Note: Other size is available on request.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
Battery Liquid Cooling Plate
Aluminum Electric Automobile Battery Liquid Cooling Plate

◆Good surface smoothness

◆Large thermal transfer area

◆Optional flow channel design

◆Easy processing and shaping

◆Excellent thermal cooling effect

◆Low leakage risk and high reliability

◆Stable and high production efficiency

◆Good pressure resistance and strength

Waterproof Cold Shrink tube
Silicone Rubber Cold Shrink Tube With Mastic en-KC97
◆ High elastic silicone rubber tube structure with mastic built-in, dual layers design can bring double guarantee of weatherproofing protection;
◆ IPX8 class, stable and long-life during operation;
◆ Easy to install, only two steps (Cover, pull);
◆ Fast installation, only 15-30 seconds needed to seal one connection;
Easy to uninstall, only need knife to cut tube open;
◆ No limits for installation space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,
◆ No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance;
◆ Much time cost, and labor cost saving;
◆ Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone;
Self-Fusing Silicon Rubber Tape
COTRAN Z551 Self-Fusing Silicon Rubber Tape

COTRAN Z551 self-fusing silicon rubber tape is composed of self-fusing silicone rubber and easily removed liner. It has excellent resistance to tracking, ozone, UV, corrosion, water and continuous operating temperature of -50℃~180℃. It can be used in dirty areas. Suitable for busbar insulation protection and phase identification, Insulation for terminations and joints of high-voltage power cables up to 35kV, Insulation for submarine cables, submersible motors, large-sized generators, automobiles, aero engines and other electrical equipment.

Harmonica Cooling Tube
New Energy Vehicle Power Battery Harmonica Cooling Tube

◆Large thermal dissipation area

◆High thermal dissipation efficiency

◆Low leakage risk and high reliability

◆Stable and high production efficiency

◆Reduce the weight of the battery pack

◆Low energy for single cylindrical battery

◆Improve the battery life and performance

◆Less pollution and environmental protection

composite insulator termination
64/110kv YJZWFY Outdoor Termination with Composite Insulator For 64/110kv Xlpe Cable
Composite sheath has many advantages compared with traditional porcelain sheath, so it is the best substitute and has been accepted gradually all over the world.
Heat Shrink Tube
COTRAN PVDF175 Tube

COTRAN PVDF175 tube is transparent, thin wall PVDF (polyvinylidene fluoride) heat shrink tube designed for electronic, automotive and military applications requiring protection and see-through inspection in aggressive environments.

Brazed Liquid Cooling Plate
New Energy Vehicle Brazed Liquid Cooling Plate

◆Good surface flatness

◆Large thermal transfer area
◆Flexible flow channel design
◆Thin thickness to save space
◆Perfect thermal dissipation effect
◆Low leakage risk and high reliability
◆Stable and high production efficiency
◆Good pressure resistance and strength

Battery Water Cold Plate
Energy Storage System Battery Water Cold Plate


◆High production efficiency

◆Good heat exchange effect

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Low leak risk and highsecurity

Subscribe
Subscribe to our newsletter and stay up to date with the latest news and deals !

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact