Low Voltage Cast Resin Straight Through Joint

COTRAN cast resin joint kits are reliable jointing solutions for intermediate connectors of wires and cables. The cast resins without filler are high quality, and fast setting resin for tough ambient conditions. Ideal for power cable accessories as insulation or as protective layer in case of MV joints. The products have the advantages of excellent waterproof performance, convenient installation, excellent electrical performance and long-term immersion in water.

Inquiry now

product introduction

Technical Properties

The properties of the two-component cast resins after mixing and full curing are as follows:

Test item	Requirement	Typical Value	Testing standard
Voltage test at 23℃ 80℃	No breakdown at test voltage 20kV 10kV	>20kV >10kV	DIN VDE 0291
Dielectric dissipation factor 23℃ and 50Hz 23℃ and 1kHz	max. 0.1 -	0.08 0.05	DIN VDE 0291
Relative permittivity 3℃ and 50Hz 23℃ and 1kHz	< 6 -	5 5.1	DIN VDE 0291
Tracking resistance	min. KA 3c	KA 3c	DIN VDE 0291

Selection table

Cast Resin Joints	L(mm)	H(mm)	D1(mm)	D2(mm)	Note
CRK-S1	202	36	8	26	Apply to 1- 4 cores cable，conductor cross-section of 1.5-300mm²
CRK-S2	260	47	16	32
CRK-S3	360	55	21	38
CRK-S4	400	70	26	41
CRK-S5	530	100	35	56
CRK-S6	700	125	47	74

Kit Components

Part	PCs
Transparent mould body	1
Connector spacer	1
Insulating tape	1
PUR resin kit (2 chambers)	1 kit (2 chambers)
Abrasive paper	1
Installation instructions	1
Funnel (optional)	1
Connector (optional)	Provided on request

Storage

CRK-S cast resin joint kits should be stored in a humidity controlled storage (10°C to 40°C and < 75% relative humidity).

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Low Voltage Cast Resin Straight Through Joint

Tags :

Related products

Heat Shrinkable Cable Straight Termination Kit Cable Joint(8.7/15kV-26/35kV)

Straight Through Jointing Kit offered provide for suitable insulating and sealing performance and feature use of heat shrinkable and resin.

Elbow Surge Arrester (6~15kV)

Applications：

suitable for American 200A electrical system, installed on the 200A interface of the high voltage outlet of American box substation, ring main cabinet, cable branch box, buried transformer and other electrical equipment to provide overvoltage protection for electrical equipment.

The product interface complies with the 200A casing design in the standard IEEE386.

T rear with double protection surge arrestor (6~35kV)

Applications：

Provide lightning protection and over-voltage protection, can effectively ensure the safe operation of the power grid.

Heat Shrink 3 Cores Conductive Breakout (1~36kV)

Applications：

The electrically semi-conductive property of the breakout provides effective conductive screen and sealing protection to the cable terminations. The breakout can be used to cable terminations up to 36kV.

COTRAN ECap Cold Shrink Rubber EPDM End Cap

COTRAN Cold shrink rubber end caps are usually used for environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. Cold shrink EPDM end caps are close-ended, tubular rubber tube that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage, like moisture, contamination and corrosion etc.

Heat Shrink Anti tracking Insulation Tube (1~36kV)

Applications：

Used to provide insulation protection for cable terminal, load-break switches, power circuit breakers, etc.

Heat shrink cable accessories 10-36KV

Cotran heat shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48, IEEE-404, IEC60502. Our heat shrink terminations offers reliable and consistent performance for longer service life. We have designed our heat shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36KV.

Silicone rubber cold shrink tube En-CST

◆IPX8 class, stable and long-life during operation

◆Easy to install, only two steps (Cover, pull)

◆Fast installation, only 15-30 seconds needed to seal one connection

◆No limitation of spare space, especially design for MIMO &massive MIMO Antenna, also convenient to deploy on wall-mounted, high tower, pole-mounted condition etc.,

◆Easy to uninstall, only need knife to cut tube open

◆No skill required by engineers, uniform quality after installation, stable and good sealing and weatherproofing performance

◆Much time cost, and labor cost saving

◆Good operating capability under extreme cold and hot condition, highland, salt-mist situation, heavy windy weather, and anti-UV, anti-ozone

Categories