KC80-S Cable Insulation Sealing Protective Pad

KC80-S cable insulation sealing protective pad is a self-adhesive sheet made of EPR rubber and butyl mastic, which has excellent weather resistance, wear resistance, insulation, waterproof and other properties. It is mainly used for the repair of cable outer sheath, the coating of power fittings, insulation protection and other scenarios. It provides excellent waterproofing performance and temperature stability. Operating temperature rated to 90°C. Emergency overload rating to 130°C.

Inquiry now

product introduction

Product Features

Insulation protection , wear resistance and waterproof sealing
Weathering and corrosion resistance
Self-adhesive to form a reliable seal for long-term operation
Ozone resistant
UV resistant
Operating temperature: -20-40℃

Technical Properties

Property	Typical value	Test method
Thickness	Thickness：4.30mm EPR: 1.30mm; Mastic: 3.00mm	ASTM D 1000
Tensile strength	0.58MPa	ASTM D 412
Elongation at break	900%	ASTM D 412
Thermal aging test (110 ℃/168h)	Pass	IEC 60811
Tracking and erosion resistance	2.75kV, ≥1h，pass	IEC 60587 Test Method 2 Standard A
AC withstand voltage test	35kV, 60s，No breakdown	IEC 60060-1
AC withstand voltage test	25kV, 5min，No breakdown	IEC 60060-1
Volumetric resistivity	5.9×10¹⁵Ω.cm	IEC 60250
UV resistance	Pass	ASTM G 53
Heat Exposure (130°C, 1h)	Pass	ASTM D 4388

Specification

400mm x210mm, 140mm x210mm

*Other sizes and packing are available on requested.

Shelf life and Storage

KC80-S cable insulation sealing protective pad has 3 year's shelf life from date of manufacture when stored in a humidity controlled storage (0 °C to 30 °C and <75% relative humidity).

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : KC80-S Cable Insulation Sealing Protective Pad

Tags :

Related products

Self-adhesive Water Proofing Butyl Tape KC101

◆ High adhesion

◆ Weather resistance

◆ High flexibility

◆ High elongation at break

KC87 Waterproof Insulation Tape

Solvent-free Insulating Anticorrosive Waterproof Coating KC1000

KC1000 is a solvent-free insulating anticorrosive waterproof coating, bubble is in water for a long time still can maintain the performance, can reduce the corrosion of corrosive environment of electric equipment, can reduce the snakes, rats, birds, small animals such as the cause of disaster risk, also can reduce because of the extreme weather (the typhoon, rain and snow, etc.) caused by accidents, provide long-term stable safe protection for power supply.

Energy Storage System Cell Water Cooling Plate

◆High production efficiency

◆Large thermal transfer area

◆High performance cost ratio

◆Rapid thermal cooling speed

◆Thin thickness to save space

◆Easy processing and shaping

◆Good thermal exchange effect

◆Low leak risk andhigh reliability

Electrical Insulating Filler Tape KC78

◆ High tensile strength and bonding strength.
◆ Suitable for irregular shapes cable with good elongation.
◆ Ensuring high quality seal over a wide range of temperatures.
◆ Physical and electrical properties are unaffected by the degree of stretch.
◆ Self-fusing tape.
◆ Good chemical resistance, weather resistance and corrosion resistance.
◆ Excellent ageing properties.
◆ Excellent electrical properties.
◆ Operation and installation easily.

Heat Shrinkable Busbar Insulation Tube

Designed for insulation of copper and aluminum busbars- for electrical substations and switchgear cabinets. Can be used for exterior installations

Shrink ratio: 2.5:1

Operating voltage: 35 kV

Material: polyolefin, halogen-free «HF»

Analogs: BPTM (Raychem); BBI (3M)

Resistant to the phenomenon of tracking and UV radiation

High dielectric strength

Color: brick red

The use of tubes ТТШ allows shortening the distance between phase busbars and significantly reducing the dimensions of the device

Protects electrical busbars against chemical corrosion

Protects equipment from short circuits in case of contact of electrical devices with animals and birds

COTRAN HMWT Medium Wall Heat Shrinkable Tube

COTRAN HMWT medium wall heat shrinkable tube is made from radiation crosslinked polyolefin. Specifically designed formulation makes the tubing to have outstanding physical, chemical and electrical properties, and also meet the requirement of RoHS and other environment concerned standards. It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.

Anticorrosive Coating for Towers

Anticorrosive coating for towers is a two-component, thick-type, one-side polyurethane acrylic coating with excellent weather resistance and long recoating performance. This product has both anti-corrosion, weather resistance in one, with excellent wear resistance, impact resistance, color retention and aging resistance.

Categories